ZIPRO JumpPro Premium TrampPukapuka Kaiwhakamahi oline

1. Nga Korero Haumaru Nui

Read all instructions carefully before assembling and using the trampraina. Ki te kore e whai i ēnei tohutohu, ka pāngia pea koe e te whara kino.

• Tirohanga Pakeke: Always ensure adult supervision when children are using the trampoline.
• Tepe Taumaha: Kaua e neke ake i te kaha o te taumaha o te 150 kg.
• Kotahi te peke i te wā kotahi: Kotahi anake te tangata me peke ki runga i te trampoline at a time to prevent collisions.
• Whakawātea: Ensure adequate overhead clearance and a clear area around the trampoline. Maintain a minimum of 2 meters (6.5 feet) of clear space on all sides.
• No Somersaults: Avoid somersaults or other high-risk maneuvers without proper training and supervision.
• Nga Tikanga Huarere: Kaua e whakamahia te trampoline in strong winds, rain, or other adverse weather conditions. Secure the trampoline to the ground using anchor kits (not included) to prevent it from being blown away.
• Tirotiro: Tirotirohia te trampoline for damaged, worn, or missing parts. Replace any faulty components immediately.
• Tomokanga/Putanga: Always use the provided ladder for safe entry and exit. Do not jump on or off the trampoline.
• Huhu: Remove shoes before using the trampoline.
• Taunakitanga Tau: Ko tenei trampoline is designed for recreational use by children and adults.

This device complies with safety standards: EN 71:1-2014+A1, EN 71:2, EN 71:3-2019+A1, EN 71-14:2019-03.

2. Ihirangi mokete

Before assembly, verify that all components listed below are present and undamaged:

• 1x ZIPRO JumpPro Premium TrampTāpare oline
• 1x Jumping Mat
• 1x Safety Enclosure Net
• 1x arawhata
• 70x Galvanized Springs
• All necessary Assembly Elements (bolts, nuts, tools, etc.)
• 1x Manual Tohutohu (tenei tuhinga)

Mena kua ngaro, kua pakaru rānei ētahi wāhanga, whakapā atu ki te ratonga kiritaki i mua i te haere tonu me te huihuinga.

3. Tatūnga me te Runanga

Assembly typically takes less than 30 minutes with two adults. Follow these steps carefully.

3.1 Huinga Tāpare

Begin by assembling the galvanized steel frame. The innovative CROSS-SECTION system allows poles to interlock securely without screws, ensuring quick and stable construction.

• Unpack all frame components.
• Connect the circular frame sections using the CROSS-SECTION system. Ensure each connection clicks into place firmly.
• Attach the 5 U-shaped leg bases to the circular frame.
• Verify all frame connections are secure and the structure is stable.

3.2 Jumping Mat and Spring Installation

Install the jumping mat and attach the 70 galvanized springs.

• Lay the jumping mat evenly across the frame.
• Using the provided spring tool, attach the 70 galvanized springs. Start by attaching springs at opposite points (e.g., 12 o'clock, 6 o'clock, 3 o'clock, 9 o'clock) and then fill in the gaps to ensure even tension.
• Ensure all springs are securely hooked to both the jumping mat and the frame.

3.3 Safety Net and Pole Installation

Install the safety enclosure net and its supporting poles.

• Assemble the curved safety net poles.
• Attach the foam-covered poles to the trampanga oline.
• Thread the safety net onto the poles, ensuring the net is taut and the springs are outside the net for maximum safety.
• Secure the net at the top and bottom as per the instructions, ensuring the double zipper entry is functional.

3.4 Ladder Installation

Attach the ladder for safe access.

• Assemble the ladder components.
• Hook the ladder securely onto the trampanga oline.

4. Nga Tohutohu Whakahaere

Hei whakarite i tētahi wheako haumaru, ngahau hoki, whai i ēnei aratohu whakahaere:

• Pre-Jump Check: Before each use, quickly check the trampoline for any loose parts, tears in the net or mat, or damaged springs.
• Entering the Trampoline: Always use the ladder to climb onto the trampoline. Open the zipper, step onto the jumping mat, and close the zipper securely behind you.
• Tikanga Peke: Start with small bounces and gradually increase height. Maintain control at all times.
• Exiting the Trampoline: Stop jumping, walk to the ladder, open the zipper, and carefully climb down. Do not jump off.
• Tirohanga: Children must always be supervised by a responsible adult.

5. Tiaki

Mā te tiaki auau ka roa ake te ora o tō wakaampraina, kia mau tonu ai te haumaru.

• Te horoi: Clean the jumping mat and safety net with mild soap and water. Rinse thoroughly and allow to air dry. Avoid harsh chemicals.
• Tirohanga Tāpare: Periodically check the galvanized steel frame for rust or damage. Touch up any scratches with rust-resistant paint.
• Tirohanga Puna: Inspect all springs for stretching, damage, or detachment. Replace any compromised springs immediately.
• Net and Mat Inspection: Check the safety net and jumping mat for tears, holes, or fraying. Small repairs can be made with appropriate repair kits; severely damaged components should be replaced.
• Padding: Ensure the protective padding over the springs is intact and securely fastened.
• Rokiroki Takurua: For prolonged periods of non-use, especially during winter, it is recommended to disassemble the trampoline and store it indoors in a dry place. This protects components from extreme weather and extends their lifespan.

6. Te Raru

Anei nga otinga mo nga take noa ka pa ki a koe:

• Haruru Pakū: Apply a silicone-based lubricant to frame joints or spring connections if squeaking occurs.
• Uneven Bounce: Check all springs to ensure they are correctly attached and not stretched. Ensure the trampKo te oline kei runga i te papa papatairite.
• Net Sagging: Re-tension the rope at the top of the safety net. Check all pole connections for tightness.
• He uaua ki te Huihuinga: Refer to the assembly diagrams carefully. Ensure all parts are oriented correctly. The CROSS-SECTION system is designed for easy interlocking; do not force connections.

7. Whakatakotoranga

8. Pūtāhui me te Tautoko

ZIPRO products are designed for durability and performance. This product comes with a standard warranty covering manufacturing defects.

• Wā Pūtāhui: Please refer to your purchase documentation for specific warranty terms and duration.
• Nga waahanga mokowhiti: E waatea ana nga waahanga mo te 2 tau mai i te ra o te hoko.
• Tautoko Kiritaki: For technical assistance, warranty claims, or to order spare parts, please contact ZIPRO customer service through your retailer or the official ZIPRO webpae.

Puritia to tohu hoko mo etahi kereme whakamana.