Bogen Classic C10 AmpAwhina Kaiwhakamahi lifier

1. Hua Neke Atuview

The Bogen Classic Series C10 Amplifier is designed to provide dependable audio performance and flexibility for various applications. This model is rated at 10 watts RMS output power and is UL and CSA listed, ensuring compliance with safety standards. It features discreet complementary transistor circuitry for maximum reliability of its power output stages.

Ko te C10 amplifier is part of a series that includes models with music-on-hold (MOH) output capabilities, though the C10 specifically focuses on amplification. It offers screw terminal connections for 600 Ohm 1 volt and 8 Ohm at 1 watt, along with a rear panel level control for easy adjustment.

Whakaahua 1: Mua view of the Bogen Classic C10 Amplifier, showing the main controls and branding.

2. Nga ahuatanga

• Mana Putanga RMS: 10 Watts, suitable for various audio setups.
• Whakautu Auautanga: Wide range from 70 Hz to 16 kHz for clear audio reproduction.
• Korikori iti: Total Harmonic Distortion (THD) of 1% ensures high-fidelity sound.
• Robust Circuitry: Designed with discreet complementary transistor circuitry for enhanced reliability.
• Hononga Hangawari: Screw terminal connections for 600 Ohm 1 volt and 8 Ohm 1 watt outputs.
• Adjustable Level Control: Conveniently located on the rear panel for output level management.
• Treble Equalizer: Built-in equalizer mode for treble adjustment.
• Tiwhikete Haumaru: UL and CSA listed for assured safety and quality.

3. Nga korero haumaru

Pānuihia, kia mārama hoki ngā tohutohu haumaru katoa i mua i te whakahaere i tēnei taputapu. Ki te kore e whai i ēnei tohutohu, ka pāngia pea te taputapu e te ru hiko, te ahi, te kino rānei.

• Puna Hiko: Honoa te ampte rama anake ki te momo pūtake hiko kua tohua ki te tapanga tohu.
• Whakahau: Me whakarite kia pai te hau. Kaua e araia nga whakatuwheratanga hau. Tāutahia kia rite ki nga tohutohu a te kaihanga.
• Te wai me te makuku: Kaua e tukuna tenei taputapu ki te ua, ki te makuku ranei. Kaua e whakamahi tata ki te wai.
• wera: Kaua e whakauruhia ki te taha o nga puna wera penei i nga radiators, nga rehita wera, nga umu, me etahi atu taputapu (tae atu ki ampkaiwhakaora) e whakaputa ana i te wera.
• Ratonga: Tukuna nga ratonga katoa ki nga kaimahi ratonga whai tohu. Ka hiahiatia he ratonga ina kua pakaru nga taputapu i tetahi huarahi, penei i te taura hiko, te mono ranei kua pakaru, kua maringi te wai, kua taka ranei nga taonga ki roto i te taputapu, kua kitea te taputapu ki te ua, ki te makuku ranei, kaore e mahi noa. , kua tukuna ranei.
• Te horoi: Wewetehia tenei hua mai i te putanga o te pakitara i mua i te horoi. Kaua e whakamahia nga kai horoi wai me nga kai horoi aerosol. Whakamahia te panuiamp kakahu mo te horoi.

4. Ihirangi mokete

Upon opening the package, verify that all components are present and in good condition. The standard package for the Bogen Classic C10 Amplifier typically includes:

• Bogen Classic C10 AmpWaeine whakaahuru
• Waea hiko
• Pukapuka Kaiwhakamahi (tenei tuhinga)

If any items are missing or damaged, please contact your dealer or Bogen customer support immediately.

5. Tatūnga

Follow these steps to set up your Bogen Classic C10 AmpKaiwhakaora:

1. Turanga: Whakanohoia te amplifier on a stable, flat surface with adequate ventilation around the unit. Avoid placing it near heat sources or in direct sunlight.
2. Hononga Kaikōrero: Connect your speakers to the appropriate screw terminals on the rear panel. The C10 supports 8 Ohm at 1 watt speaker connections. Ensure correct polarity (+ to + and - to -) for optimal sound.
3. Hononga Whakauru: Honoa to puna ororongo (hei tauira, te whakaranu, mua-amplifier) to the input terminals. The amplifier provides screw terminal connections for 600 Ohm 1 volt input sources.
4. Hononga Hiko: Me whakarite te amplifier's power switch is in the OFF position. Connect the power cord to the amplifier's power inlet, then plug the other end into a suitable AC power outlet.
5. Tautuhinga Tuatahi: Before powering on, ensure all volume/level controls on the amplifier are set to their minimum position to prevent sudden loud sounds.

6. Nga Tohutohu Whakahaere

Kotahi te ampKua tatūhia te rifier, whai i enei mahi mo te mahi:

1. Whakahiko: Flip the power switch on the front panel to the ON position. The power indicator light should illuminate.
2. Adjust Input Source: Ensure your audio source is playing.
3. Adjust Level Control: Slowly increase the level control knob on the rear panel until the desired output volume is achieved. Avoid setting the level too high, which can cause distortion.
4. Whakaritenga Takitoru: Use the treble equalizer control to fine-tune the high-frequency response of your audio.
5. Weto Whakakore: When finished, turn the level control down, then flip the power switch to the OFF position.

7. Tiaki

Proper maintenance ensures the longevity and optimal performance of your Bogen Classic C10 Ampkaikawe

• Te horoi: Me horoi i nga wa katoa o waho o te amplifier with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, but ensure the unit is unplugged and completely dry before reconnecting power. Do not use harsh chemicals or abrasive cleaners.
• Whakahau: Tirohia i ia wā, kia kore ai he puehu, he paru rānei i roto i ngā pūaha hau. Whakamahia he paraihe ngohengohe, he hau pēhi rānei hei whakakore i ngā mea e ārai ana.
• Rokiroki: Mena kei te penapena te amplifier for an extended period, ensure it is kept in a cool, dry place, away from direct sunlight and extreme temperatures.
• Tirohanga taura: Periodically inspect all connected cables (power, input, speaker) for any signs of wear, fraying, or damage. Replace damaged cables immediately.

8. Te Raru

If you encounter issues with your Bogen Classic C10 Amplifier, tirohia te aratohu rapurongoā e whai ake nei:

Mena ka mau tonu te raruraru i muri i te whakamātau i ēnei otinga, whakapā atu ki te ratonga kiritaki a Bogen, ki tētahi tohunga ratonga tohunga rānei.

9. Whakatakotoranga

10. Pūtāhui me te Tautoko

Bogen Communications International, Inc. provides a limited warranty for its products. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Bogen webpae.

For technical support, service, or inquiries regarding your Bogen Classic C10 Amplifier, please contact Bogen customer support through their official channels. Have your model number (BG-C10) and serial number (if applicable) ready when contacting support.

Rauemi ipurangi: For additional information, FAQs, and product updates, visit the official Bogen webpae.