Kupu Whakataki
This manual provides comprehensive instructions for the setup, operation, and maintenance of your LiftMaster 893Max Security+ 2.0 3-Button Remote Control. This multi-function remote is designed to control up to three garage door openers, gate operators, or MyQ enabled light accessories. It features Security+ 2.0 rolling code technology for enhanced security.
Whakaahua: Mua view of the LiftMaster 893Max 3-Button Remote Control.
Nga korero haumaru
Always ensure the area around the garage door or gate is clear before operating. Keep remote controls out of reach of children. Do not allow children to play with the remote control or the garage door/gate operator. Only operate the garage door/gate when it is in full view me te kore he aukati.
- Do not attempt to repair the remote control yourself. Refer to qualified service personnel.
- Horoihia nga pākahiko kia rite ki nga ture a rohe.
- The Security+ 2.0 technology ensures a new code is sent with every click, enhancing security.
Image: LiftMaster 893Max remote control highlighting Security+ 2.0 technology.
Ihirangi mokete
- 1 x LiftMaster 893Max 3-Button Remote Control
- 1 x Visor Clip
- 1 x 3V Lithium Battery (pre-installed)
Tatūnga me te Papatonotanga
The LiftMaster 893Max remote control is compatible with all LiftMaster garage door openers manufactured since January 1993, and all 315MHz Security+® LiftMaster and Elite Series Gate Operators. It is also compatible with Chamberlain and Craftsman Security+ 2.0 operators.
Tohutohu Papatono:
- Kimihia te Pātene Ako: On your garage door opener motor unit, locate the "Learn" button. The color of this button (yellow, purple, red/orange, or green) indicates the frequency and technology of your opener.
- Whakahohehia te Aratau Ako: Press and immediately release the "Learn" button on your garage door opener. The LED indicator on the opener will light up, indicating it is in learn mode. You have approximately 30 seconds to complete the next step.
- Whakahōtakahia te Mamao: On your 893Max remote control, press and hold the button you wish to program. The remote's LED will flash.
- Release the Button: Release the remote control button when the garage door opener lights flash or two clicks are heard. This confirms that the remote has been successfully programmed.
- Whakamātauria te Mamao: Press the programmed button on your remote control to test its operation.
Image: LiftMaster 893Max remote control with "Programmable" text, indicating compatibility.
Video: Programming Demonstration
Video: A demonstration of programming the LiftMaster 893MAX 3-Button Garage Door Remote.
Nga Tohutohu Whakahaere
The 893Max remote control features three buttons, allowing you to operate up to three different devices such as garage doors, gate operators, or MyQ enabled light accessories.
- Opening/Closing a Device: Press the programmed button once to activate the associated garage door, gate, or light. Pressing it again will stop or reverse the operation, depending on the device's current state.
- Topenga Visor: The included visor clip allows for convenient attachment to your vehicle's sun visor for easy access.
- Tohu LED: The remote's LED light signals activation and assists during the programming process.
Image: LiftMaster 893Max remote control showcasing its three-button design.
Ataata: Mana Mamao e Mahi Ana
Video: A demonstration of the LiftMaster 893Max remote control operating a garage door.
Video: Another demonstration of the LiftMaster 893Max remote control's functionality.
Te tiaki
Whakakapinga Pūhiko:
The remote control uses one 3V Lithium battery (CR2032). The average battery life is approximately 5 years. When the battery is low, the LED indicator may dim or fail to light up during operation.
- Whakatuwheratia te mana mamao casing. This usually involves a small screw or a snap-on cover.
- Tangohia marietia te pākahiko tawhito CR2032.
- Insert a new 3V CR2032 Lithium battery, ensuring correct polarity (+/-).
- Katia te mana mamao casing haumaru.
Te horoi:
Horoia te mana mamao ki te kakahu ngohengohe, maroke. Kaua e whakamahi i ngā kaihoroi whakakoi, i ngā whakarewa rānei.
Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Remote does not operate the device. | Kua mate, kua iti rānei te pākahiko. | Replace the 3V Lithium battery (CR2032). |
| Kāore te mana mamao i te hōtakahia. | Remote lost its programming or was never programmed. | Follow the "Setup and Programming" instructions to reprogram the remote. |
| He iti te whānuitanga o te mana mamao. | Te pokanoa, te iti rānei o te pākahiko. | Ensure there are no obstructions. Replace battery if needed. |
| Remote is not compatible. | Opener uses a different technology or frequency. | Verify your garage door opener's learn button color and frequency. The 893Max is compatible with LiftMaster, Chamberlain, and Craftsman Security+ 2.0 operators (green, yellow, amber, red, or purple learn buttons). |
Whakatakotoranga
- Tauira: 893MAX
- Waitohu: Kaiwhakaako Hiki
- Te maha o nga Patene: 3
- Hangarau: Security+ 2.0 rolling code
- Hototahi: All LiftMaster garage door openers manufactured since January 1993 (green, yellow, amber, red, or purple learn buttons), 315MHz Security+® LiftMaster and Elite Series Gate Operators, Chamberlain, and Craftsman Security+ 2.0 operators.
- Pūhiko: 1 x 3V Lithium (CR2032) (included)
- Taumaha Tūemi: 0.96 hekere
- Rahi Hua: 4.63 x 2.75 x 1.13 inihi
- Āhuahira Motuhake: Hoahoa ergonomic, kei roto hoki te topenga ārai kanohi
Pūtāhui me te Tautoko
The LiftMaster 893Max remote control comes with a 1-tau pūtāhui from the date of purchase, protecting against defects in materials and workmanship.
Image: LiftMaster 893Max remote control highlighting the 1-year warranty.
For technical assistance, troubleshooting, or warranty claims, please contact LiftMaster customer support. You can find contact information on the official LiftMaster webpae, ma to kaihoko hua ranei.
