Pukapuka Kaiwhakamahi mō te Matawai Paekōti Taiaho EMACHINE

1. Kupu Whakataki

This manual provides detailed instructions for the proper use, setup, and maintenance of your EMACHINE Laser Barcode Scanner, model IDATA LS-6030U. This device is designed for fast and simple barcode reading across a wide variety of applications, featuring an ergonomic design for enhanced handling and a rubber coating for high protection.

2. Ihirangi mokete

Please check the package contents carefully. If any items are missing or damaged, contact your vendor immediately.

• Matawai Waehere Tae Taiaho
• USB Cable (1.8 meters)
• Pukapuka Kaiwhakamahi (tenei tuhinga)

3. Nga Hua o te Hua

The EMACHINE Laser Barcode Scanner offers robust performance and user-friendly features:

• Puna Maama: 650 nm (+10/-5 nm) Laser Diode, 1mW (peak)
• Hōhonu o te Āpure: (4 mils) 400 mm
• Tere Matawai: 100 karapa/hekona
• Whakatau: 0.1 mm (4mils) - Code 39
• Pūrata Tā: 45% teitei ake ranei
• Koki Matawai: 38°
• Tohu: Green/Red LED & audio signal
• Atanga: USB
• Nga Tohu Tautoko: Code 128, Codabar, Interleaved 2 of 5, Industrial 2 of 5, Matrix 2 of 5, UPC-A, UPC-E, EAN-13, EAN-8, MSI, PLESSEY, Code 11, Code 39, Code 32, Code 93
• Hoahoa ergonomic mo te pai te whakahaere.
• Durable rubber and ABS plastic construction for protection.
• No moving parts inside for enhanced durability.
• He ngawari ki te whakamahere.

4. Tohutohu Tatūnga

A pee i enei mahi ki te whakarite i to matawai paewaehere:

1. Honoa te Taura USB: Locate the USB cable provided in the package. Insert the smaller end of the USB cable into the port at the base of the barcode scanner handle.
2. Hono ki Rorohiko: Insert the standard USB-A end of the cable into an available USB port on your computer or point-of-sale (POS) system.
3. Tāuta Atekōkiri (Aunoa): The scanner is typically plug-and-play. Your operating system should automatically detect the device and install the necessary drivers. Wait for the installation to complete, which is usually indicated by a notification.
4. Hononga Whakamatau: Open a text editor (like Notepad or Word) or any application where you want to input scanned data. Point the scanner at a known barcode (e.g., from a book or product) and press the trigger button. The scanner should emit a laser beam and an audible beep upon successful scan. The barcode data should appear in your open application.

Figure 4.1: Barcode scanner in use, demonstrating the scanning process.

5. Nga Tohutohu Whakahaere

Operating the EMACHINE Laser Barcode Scanner is straightforward:

1. Whakahiko: The scanner receives power directly from the USB connection. Once connected to a powered USB port, it is ready for operation.
2. Whāinga: Hold the scanner comfortably in your hand. Point the scanning window towards the barcode you wish to read. Ensure the laser beam covers the entire barcode.
3. Matawai: Pēhia, ka pupuri i te pātene keu kei runga i te kakau. Ka puta he rārangi taiaho whero mai i te matapihi matawai.
4. Successful Scan: Upon a successful read, the scanner will emit an audible beep, and the LED indicator will flash green. The scanned data will be transmitted to your connected computer or POS system, appearing in the active input field.
5. Unsuccessful Scan: If the scanner does not beep or the LED does not flash green, reposition the scanner, adjust the distance, or try scanning from a different angle. Ensure the barcode is not damaged or obscured.

Whakaahua 5.1: Mua view of the barcode scanner.

Whakaahua 5.2: Taha view of the barcode scanner, showing its profile.

6. Whakatakotoranga

Detailed technical specifications for the EMACHINE Laser Barcode Scanner:

6.1. Nga Ahuatanga Hiko

• Whakauru Voltage: 5 VDC ± 0.5V
• Kohi o nāianei: 60mA mōrahi
• Tiwhikete: FCC Class B, CE, IEC60825 Class II, CDRH: Class II

6.2. Nga ahuatanga o te tinana

• Mahinga (L * W * H): 90 x 60 x 160 mm
• Taumaha: 110 g ± 5 g (without cable)
• Rauemi: Rubber & ABS plastic
• Te Waahi Mahi: 0° ki te 50°C
• Paemahana Rokiroki: -20° ki te 60° C
• Haumākū Mahi: 10% ki te 85% kore-condensing
• Haumākū Rokiroki: 5% ki te 95% kore-condensing
• Ambient Light Immunity: Sunlight up to 36000 Lux
• Ātete Whakataka: 1.5m taka

6.3. Reading Performance (Based on Code 39 label PCS=0.9 and 600 lux illumination, tolerance ± 1cm)

• 4 mils: 60 ~ 90 mm
• 5 mils: 55 ~ 120 mm
• 13 mils: 45 ~ 200 mm
• 20 mils: 45 ~ 300 mm
• 40 mils: 65 ~ 400 mm

7. Tiaki

Proper maintenance ensures the longevity and optimal performance of your barcode scanner:

• Te horoi: Regularly clean the scanning window with a soft, lint-free cloth. For stubborn smudges, dampen the cloth slightly with water or a mild, non-abrasive cleaner. Do not use harsh chemicals or abrasive materials, as they can scratch the window and impair scanning performance.
• Rokiroki: When not in use, store the scanner in a clean, dry environment, away from direct sunlight, extreme temperatures, and excessive dust.
• Tiaki taura: Avoid bending or twisting the USB cable excessively, especially near the connectors, to prevent internal wire damage. Do not pull the cable to disconnect the scanner; always grasp the connector itself.
• Aukati i nga Whakataka: While the scanner has drop resistance, repeated or severe drops can still cause damage. Handle the device with care.

8. Te Raru

If you encounter issues with your barcode scanner, refer to the following common problems and solutions:

9. Pūtāhui me te Tautoko

This product is covered by a standard manufacturer's warranty. For specific warranty terms, duration, and conditions, please refer to the warranty card included with your purchase or contact your original point of sale or the manufacturer directly.

For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact the vendor or manufacturer using the contact information provided at the time of purchase.