1. Kupu Whakataki
This manual provides detailed instructions for the proper installation, operation, and maintenance of your CURT 16424 5th Wheel Installation Brackets. These brackets are designed to provide a secure mounting platform for industry-standard 5th wheel hitch rails (sold separately) on specific Ford Super Duty trucks. Please read this manual thoroughly before beginning installation to ensure safe and correct usage.
Whakaahua 1.1: Ka mutuview of the CURT 16424 5th Wheel Installation Brackets.
2. Nga korero haumaru
WHAKATŪPATO: Improper installation or use of this product can result in serious injury or property damage. Always follow all instructions and safety precautions.
- Always wear appropriate personal protective equipment, including safety glasses, during installation.
- Ensure the vehicle is securely supported on a level surface before beginning work.
- Do not exceed the towing capacity of your vehicle or 5th wheel hitch.
- Verify all fasteners are tightened to the specified torque values.
- CALIFORNIA WHAKAMATARA: Te mate pukupuku me te mate whanau - www.P65Warnings.ca.gov
3. Ihirangi mokete
Manatokona kei te noho nga waahanga katoa i mua i te tiimata o te whakaurunga:
- CURT 16424 5th Wheel Installation Brackets (Left and Right)
- All necessary mounting hardware (bolts, nuts, washers, spacers)
- Fish wire tool (for bolt installation in frame)
Whakaahua 3.1: View of the CURT 16424 5th Wheel Installation Brackets along with the included mounting hardware.
4. Whakatakotoranga
| Āhuahira | Taipitopito |
|---|---|
| Tau tauira | 16424 |
| Waitohu | KITI |
| Hunga Hua | 25 x 7.1 x 4.63 inihi |
| Taumaha Tūemi | 26.5 pauna |
| Whakaoti | CARBIDE BLACK POWDER COAT (A-coat) |
| Hototahi | Designed for use with CURT industry-standard 5th wheel base rails #16104 or #16204 (sold separately) |
5. Waka Hototahi
These custom 5th wheel brackets are engineered for a specific fit on select model years of the following vehicles:
- Ford F-250 Super Duty
- Ford F-350 Super Duty
- Ford F-450 Super Duty
Always verify fitment for your specific vehicle year and model before installation.
6. Tatūnga & Tāuta
The CURT 16424 brackets are designed for a custom fit, often utilizing existing frame holes to minimize drilling. This section outlines the general installation process. Refer to the detailed instructions provided with your CURT 5th wheel rail kit for specific torque values and complete steps.
6.1. Nga Mahi i mua i te whakaurunga
- Tuhia te waka ki runga i te mata papatahi ka uru ki te waahi waka.
- Momotuhia te tauranga pākahiko kino.
- If necessary, remove the spare tire to provide adequate working space.
- Clear any debris or obstructions from the truck frame where the brackets will be mounted.
6.2. Tautanga Taiapa
These brackets mount underneath the truck bed and are designed to accept industry-standard 5th wheel rails above the truck bed. They are intended for use with CURT rail kits #16104 or #16204 (sold separately).
- Position the brackets on the truck frame according to the specific vehicle application. The custom design ensures they align with existing frame holes where possible.
- Use the provided fish wire tool to guide bolts through the frame and into the bracket mounting points.
- Secure the brackets to the truck frame using the supplied hardware (bolts, nuts, washers). Do not fully tighten at this stage.
- Once the brackets are loosely secured, position the 5th wheel rails (sold separately) onto the brackets. Ensure proper alignment.
- Drill any necessary holes through the truck bed and frame as indicated by the rail kit instructions. For custom-fit brackets, drilling into the frame is often minimized or eliminated.
- Insert the remaining hardware to secure the rails to the brackets and the truck bed.
- Hiranga: Before final tightening, place your 5th wheel hitch or Anderson hitch into the rails to confirm proper fitment and alignment.
- Tighten all bolts to the manufacturer's specified torque values. Refer to your rail kit instructions for these specifications.
Image 6.1: Illustration of the CURT 16424 brackets installed on a truck frame, supporting a 5th wheel hitch and rails.
Image 6.2: The CURT 16424 brackets shown with compatible 5th wheel rails, illustrating how they connect.
Note on Sensor Control Module (if applicable): Some vehicles may have a sensor control module near the installation area. Factory wiring may limit movement. If relocation is necessary, consider leaving the clip closest to the tailgate in place and securing the clip closest to the cab with a zip-tie, or use an installer-supplied bolt and nut to place the relocation bracket closer to the sensor.
Whakaaturanga Ataata:
No official installation videos from the seller were found in the provided data. Please refer to the written instructions and diagrams.
7. Mahi
The CURT 16424 5th Wheel Installation Brackets serve as a foundational component for your 5th wheel towing system. Once properly installed with compatible 5th wheel rails and a 5th wheel hitch, their operation is integrated with the hitch itself.
- Ensure the 5th wheel hitch is securely mounted to the rails, and the rails are firmly attached to the brackets.
- Always follow the operating instructions provided with your specific 5th wheel hitch for coupling, uncoupling, and towing procedures.
- Regularly inspect the connection points between the hitch, rails, and brackets for any signs of wear or loosening before each towing trip.
8. Tiaki
Proper maintenance ensures the longevity and safe performance of your CURT 5th wheel installation brackets.
- Tirotiro auau: Periodically inspect the brackets, bolts, and all connection points for signs of corrosion, damage, or loosening. This is especially important after towing or exposure to harsh weather conditions.
- Te horoi: Clean the brackets with mild soap and water. Avoid harsh chemicals that could damage the A-coat finish.
- Parenga waikura: The brackets feature a durable A-coat finish for corrosion resistance. If the finish is damaged, touch up with a rust-inhibiting paint to prevent rust.
- Torotika Whakapiri: Re-check the torque of all mounting bolts periodically, especially after the first few towing trips, to ensure they remain tightened to specifications.
9. Te Raru
E aro ana tēnei wāhanga ki ngā take noa ka puta ake i te wā tāutanga, i muri rānei i te tāutanga.
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Brackets do not align with frame holes. | Incorrect bracket orientation or vehicle application. | Verify the brackets are oriented correctly (left/right) and that the product is compatible with your specific vehicle year/model. |
| Difficulty inserting bolts into frame. | Obstruction in frame or improper use of fish wire. | Ensure the frame is clear. Re-attempt with the fish wire, ensuring it's properly attached to the bolt. Some minor adjustments or "coaxing" may be needed. |
| Rails do not sit flush on brackets. | Debris, incorrect rail placement, or untightened bracket bolts. | Clear any debris. Ensure rails are correctly positioned. Loosen bracket bolts, adjust rails, then re-tighten. |
| Loose connection after towing. | Bolts not torqued to specification or settling of components. | Re-check and re-torque all mounting bolts to the specified values. Perform regular inspections. |
Mena ka pā mai ngā raruraru kāore i te rārangihia i konei, e hiahia ana rānei koe ki ētahi atu āwhina, whakapā atu ki te ratonga kiritaki a CURT.
10. Nga Korero Whakaputanga
CURT Manufacturing products are backed by a limited lifetime warranty. This warranty covers defects in material and workmanship under normal use and service. Specific warranty terms and conditions may vary. For complete warranty details, please refer to the official CURT website or contact CURT customer service.
11. Tautoko Kiritaki
For technical assistance, missing parts, or warranty claims, please contact CURT customer support:
- Webpae: Tirohia te paetukutuku CURT mana webpae mo nga FAQ, nga korero hua, me nga puka whakapā.
- Waea: Refer to the CURT website for current customer service phone numbers and operating hours.
Ina whakapā atu ki te tautoko, me tono mai to nama tauira hua (16424) me nga korero hoko e waatea ana.
