Honeywell Home RTH2300B1012/E1 5-2 Day Programmable Thermostat User Manual

Kupu Whakataki

The Honeywell Home RTH2300B1012/E1 is a 5-2 day programmable thermostat designed for simple and efficient control of your home's heating and cooling system. This thermostat allows you to set distinct programs for weekdays and weekends, helping to optimize energy usage by adjusting temperatures when you are away or asleep. Its backlit digital display ensures clear visibility of settings and current conditions. This manual provides comprehensive instructions for installation, operation, and maintenance to ensure optimal performance and comfort.

Whakaahua: Mua view of the Honeywell Home RTH2300B1012/E1 programmable thermostat, showing its digital display and control buttons.

Nga korero haumaru

• WHAKATŪPATO: Pūmate Hiko. Disconnect power to the heating/cooling system at the circuit breaker or fuse box before installing or servicing the thermostat. Failure to do so could result in electrical shock or equipment damage.
• Kua hoahoatia tenei thermostat mo te iti-voltage (24V) systems. Do not use on line voltage (120-240V) applications, such as electric baseboard heaters.
• Ko te whakaurunga me mahi e tetahi tohunga hangarau ki te kore koe e tino mohio mo nga tikanga waea.
• Me whakarite kia mau nga hononga waea katoa me te whai ki nga waehere hiko o te rohe.

Ihirangi mokete

Manatokohia kei roto i to kete nga mea e whai ake nei:

• Honeywell Home RTH2300B1012/E1 Programmable Thermostat
• Wall Plate (mounting hardware included)
• Pukapuka Kaiwhakamahi (tenei tuhinga)

Tuhipoka: Two AAA batteries are required for operation and are not included in the package.

Image: The Honeywell Home RTH2300B1012/E1 thermostat shown in its retail packaging, highlighting its 5-2 day programmability and backlit display.

Hototahi

E hototahi ana tenei haumanu ki nga punaha e whai ake nei:

• Kotahi-stage heating/cooling systems
• Heating-only systems
• Cooling-only systems
• Heat pumps without backup heat
• Punaha Millivolt
• Pellet stoves and fireplaces

This thermostat is KORE hototahi ki:

• Te wera papa hiko (120-240V)
• Heat pump systems with backup heat
• Maha-stage heating/cooling systems

Image: Back of the thermostat packaging, detailing features, compatibility, and contact information for support.

Tāutatanga (Tatūnga)

Follow these steps to install your new thermostat:

1. Whakaweto Hiko: Before beginning, turn off the power to your heating and cooling system at the circuit breaker or fuse box.
2. Tango Thermostat Tawhito: Ata tango i to whakamaarama tawhito mai i te pakitara.
3. Tapanga Waea: As you disconnect each wire, use the provided labels (if any) or masking tape to clearly mark each wire with the letter corresponding to its terminal on the old thermostat (e.g., R, G, Y, W, C). This step is crucial for correct wiring.
4. Maunga Papai Pereti: Position the new thermostat's wall plate on the wall. Use the included screws and anchors to secure it. Ensure it is level for aesthetic purposes.
5. Tūhono Waea: Connect the labeled wires to the corresponding terminals on the new wall plate. Refer to the wiring diagram in your specific system's manual if needed. Ensure connections are tight.
6. Whakauruhia nga Pataha: Insert two fresh AAA alkaline batteries into the battery compartment of the thermostat.
7. Āpiti Thermostat: Tiarohia te whakamaarama ki te pereti pakitara ka pana marie kia mau ra ano.
8. Whakaora i te Mana: Whakahokia te hiko ki to punaha whakamahana me te whakamahana i te waahi ara iahiko, te pouaka hiko ranei.
9. Configure Blower Switch: On the back of the thermostat unit, locate the small switch labeled 'Gas' or 'Electric'. Set this switch according to your furnace type. 'Gas' is for gas or oil furnaces, 'Electric' is for electric furnaces or heat pumps.

Nga Tohutohu Whakahaere

Mana Taketake

• Tautuhi Pātene: Used to enter programming mode and confirm selections.
• Pene Pene: Used to temporarily or permanently hold the current temperature.
• Patene Whakahaere: Used to exit programming mode and resume the programmed schedule.
• Pere Runga/Raro: Used to adjust temperature settings, time, and navigate programming options.
• System Switch (Heat/Off/Cool): Located at the bottom of the thermostat, select your desired operating mode.
• Fan Switch (Auto/On): Located at the bottom of the thermostat, select fan operation. 'Auto' runs the fan only when heating or cooling is active. 'On' runs the fan continuously.

Te Whakaritenga Wā me te Ra

1. Pehia te Tautuhi button once. The time will flash.
2. Whakamahia te Pere Runga/Raro ki te whakatika i te haora. Press Tautuhi.
3. Whakamahia te Pere Runga/Raro ki te whakatika i nga meneti. Press Tautuhi.
4. Whakamahia te Pere Runga/Raro to adjust the day of the week. Press Tautuhi to save and exit, or Rere ki te puta me te kore penapena.

Programming the 5-2 Day Schedule

This thermostat allows for one program for weekdays (Monday-Friday) and a separate program for weekends (Saturday-Sunday), each with four periods per day (Wake, Leave, Return, Sleep).

1. Pehia te Tautuhi button repeatedly until 'Set Program' appears on the display. The weekday (Mon-Fri) 'Wake' period will be displayed.
2. Wake Period: Whakamahia te Pere Runga/Raro to set the desired wake time, then press Tautuhi. Whakamahia te Pere Runga/Raro to set the desired temperature for the wake period, then press Tautuhi.
3. Leave Period: Repeat the process for the 'Leave' time and temperature, then press Tautuhi.
4. Wā Whakahoki: Repeat the process for the 'Return' time and temperature, then press Tautuhi.
5. Sleep Period: Repeat the process for the 'Sleep' time and temperature, then press Tautuhi.
6. The thermostat will now display the weekend (Sat-Sun) 'Wake' period. Repeat steps 2-5 for the weekend schedule.
7. After setting the weekend 'Sleep' period, press Tautuhi to save all changes and exit programming, or press Rere to exit without saving the last changes.

Te whakamahi i te Taumahi Pupuri

The Hold function allows you to temporarily or permanently override the programmed schedule.

• Pupuri rangitahi: While in normal operation, use the Pere Runga/Raro to adjust the temperature. The new temperature will be held until the next programmed period begins. 'Temporary Hold' will be displayed.
• Pupuri Pumau: Pehia te Puritia button. 'Hold' will appear on the display. Use the Pere Runga/Raro to set the desired temperature. This temperature will be maintained indefinitely until you press the Rere button to resume the program.

Whakamuri

The display backlight activates for approximately 8 seconds when any button is pressed, improving visibility in low-light conditions.

Te tiaki

Whakakapinga Pūhiko

The thermostat requires two AAA alkaline batteries. When the battery icon appears on the display, replace the batteries immediately to ensure continuous operation. The thermostat retains its programming for a short period during battery replacement.

1. Remove the thermostat from the wall plate by gently pulling it forward.
2. Whakatuwherahia te waahi pākahiko ka tango i nga pākahiko tawhito.
3. Insert two new AAA alkaline batteries, observing the correct polarity (+/-).
4. Snap the thermostat back onto the wall plate.

Te horoi

Whakapaihia te taha o waho o te whakamahana ki te ngohengohe, damp kakahu. Kaua e whakamahi i nga kai horoi me nga whakarewa.

Raparongoā

Whakatakotoranga

Image: The Honeywell Home RTH2300B1012/E1 thermostat held in a hand, illustrating its compact size and dimensions.

Pūtāhui me te Tautoko

This product comes with a manufacturer's warranty. For detailed warranty information, please refer to the documentation included with your purchase or visit the official Honeywell Home webpae.

For technical support, troubleshooting assistance, or to view frequently asked questions, please visit: yourhome.honeywell.com

You may also contact customer service at 1-800-468-1502.