ProMaster LS1(N) Basic Light Stand (Model 9245) Instruction Manual

Kupu Whakataki

The ProMaster LS1(N) light stand is a basic, lightweight stand designed for supporting smaller studio lights, LED panels, or camera-mounted flashes. This manual provides essential information for its safe and effective use.

Nga waahanga matua

• He hoahoa mama me te kawe.
• Ka taea te whakarite i te teitei mō ngā momo rama maha.
• Standard 1/4-inch screw mount for broad compatibility with various lighting equipment.
• Durable aluminum alloy construction.
• Stable tripod base.

Tohutohu Tatūnga

Follow these steps to correctly set up your ProMaster LS1(N) Basic Light Stand:

1. Unpack the light stand from its carrying bag.
2. Whakanohoia te turanga ki runga i te mata papatahi.
3. Horahia marietia nga waewae tripod tae noa ki te toronga me te pumau.
4. Loosen the locking knobs on each section of the central column.
5. Extend the central column to the desired height.
6. Tighten all locking knobs securely to prevent slippage.
7. Attach your lighting equipment to the 1/4-inch screw mount at the top of the stand. Ensure it is securely fastened.

Figure 1: The ProMaster LS1(N) light stand shown fully extended with its tripod legs spread for stability.

Nga Tohutohu Whakahaere

The ProMaster LS1(N) light stand offers simple adjustments for optimal lighting.

Te Whakarite Teitei

1. To adjust the height, loosen the locking knobs on the central column sections.
2. Carefully raise or lower the sections to achieve the desired height.
3. Always re-tighten all locking knobs firmly after adjustment to ensure stability.

Te taapiri i nga taputapu

The top of the stand features a universal 1/4-inch screw mount.

1. Screw your light, camera, or other compatible accessory onto this mount.
2. Ensure the accessory is tightened securely to prevent accidental detachment.

Whakaahua 2: He tata view of the ProMaster LS1(N) light stand's top mount with a studio light attached, demonstrating its compatibility.

Tiaki me te Tiaki

• Regularly inspect all locking mechanisms and screws for tightness.
• Horoia te turanga ki te kakahu ngohengohe, maroke. A ape i te kai horoi, te whakarewa ranei.
• Store the stand in its carrying bag in a dry, cool place when not in use to protect it from dust and damage.
• Do not overload the stand beyond its recommended weight capacity.

Raparongoā

Stand Instability

• Ensure all tripod legs are fully extended and evenly spread.
• Verify that all locking knobs are securely tightened.
• If using heavy equipment, consider adding sandbags to the base for increased stability.

He uaua ki te whakatikatika teitei

• Check that all locking knobs are sufficiently loosened before attempting to adjust the height.
• Ensure no debris is obstructing the telescoping sections.

Whakatakotoranga Hua

Pūtāhui me te Tautoko

For warranty information or technical support regarding your ProMaster LS1(N) Basic Light Stand, please refer to the official ProMaster webpaetukutuku, whakapā atu rānei ki tā rātou ratonga kiritaki. Puritia tō rīhiti hoko hei tohu hoko.