Vacmaster Pro VK811PH 8-Gallon Certified HEPA Wet/Dry Vac

Kupu Whakataki

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Vacmaster Pro VK811PH 8-Gallon Certified HEPA Wet/Dry Vac. Please read all instructions carefully before use and retain this manual for future reference.

Image: The Vacmaster Pro VK811PH 8-Gallon Certified HEPA Wet/Dry Vac, black and yellow, with hose and floor nozzle attached.

Nga korero haumaru

Always follow basic safety precautions when using this appliance to reduce the risk of fire, electric shock, or injury. Ensure the power cord is undamaged and properly grounded. Do not operate the vacuum in the presence of flammable liquids or gases. Always disconnect from the power supply before performing maintenance or changing accessories. Keep children and unauthorized persons away from the operating area.

Ihirangi mokete

Manatokona kei roto katoa nga mea kei roto i te kete:

Image: All components of the Vacmaster Pro VK811PH, including the main unit, hose, filters, and various attachments.

• 10 Ft. x 1-1/2 In. Crushproof Industrial Hose
• Tātari Kaata HEPA
• HEPA Microfiber Pre-Filter
• Tātari Hanga Huka
• HEPA Material Exhaust Filterpremium
• 15" Deluxe Floor Nozzle
• Paraihe Puehu Porowhita
• Utauta kowhatu
• Pūurutau Utauta Hiko
• Tuke maitai me te Mana Hau
• 20" Locking Steel Wands (2)
• Pūurutau Taonga Whakarewa
• Puke Kohinga Roimata-Atete Te Hiri

Tatūnga

Before initial use, assemble the vacuum according to these steps:

1. Whakauruhia te Hose: Securely connect the 10 ft. crushproof industrial hose to the inlet port on the vacuum tank.
2. Install Wands and Nozzles: Connect the steel wands to the hose, then attach the desired cleaning nozzle (e.g., 15" Deluxe Floor Nozzle, Crevice Tool, or Round Dust Brush) for your specific task.
3. Whakanoho Tātari:
   • Mō te Kohikohi Maroke: Ensure the HEPA Cartridge Filter and HEPA Microfiber Pre-Filter are correctly installed. For optimal dust collection, insert a Sealable Tear-Resistant Collection Bag into the tank.
   • Mō te Piki Makuku: Remove the HEPA Cartridge Filter and Microfiber Pre-Filter. Install the Foam Wet Filter over the filter cage. Do NOT use the collection bag for wet pickup.
4. Hononga Hiko: Plug the 30 ft. power cord into a suitable grounded electrical outlet.

Whakaahua: Rear view of the Vacmaster Pro VK811PH demonstrating the integrated storage for the hose, power cord, and accessories.

Image: A visual representation of the 4-stage filtration system, including the sealable dust bag, HEPA microfiber pre-filter, HEPA filter, and HEPA material exhaust filter.

Nga Tohutohu Whakahaere

Your Vacmaster Pro wet/dry vac is designed for versatile cleaning tasks.

Whakamahinga maroke

Ensure the HEPA Cartridge Filter, Microfiber Pre-Filter, and collection bag are installed. Use appropriate dry pickup accessories like the floor nozzle or crevice tool. Turn the vacuum ON using the power switch. Guide the nozzle over the area to be cleaned, allowing the powerful suction to collect debris.

Wetewete Wetiweti

Before wet vacuuming, remove the HEPA Cartridge Filter and Microfiber Pre-Filter, and install the Foam Wet Filter. Do not use a collection bag. Turn the vacuum ON. Position the nozzle over the liquid spill and move it slowly to draw up the liquid. The vacuum will automatically shut off when the tank is full. Empty the tank after wet pickup.

Image: A person using the Vacmaster Pro VK811PH with an extended wand to clean a large floor area, highlighting its 40-foot cleaning reach.

Image: A person using the Vacmaster Pro VK811PH to vacuum a liquid spill on a concrete floor, showcasing its wet pickup capability.

Mahi Whakatangitangi

The vacuum can also function as a powerful blower. To use, detach the hose from the inlet port and connect it to the blower port located on the motor head. This feature is useful for clearing debris from workshops or outdoor areas.

Te tiaki

Ko te tiaki i nga wa katoa ka tino pai te mahi me te whakaroa i te ora o to korehau.

Tiaki Tātari

• HEPA Cartridge Filter & Microfiber Pre-Filter: For dry use, these filters should be cleaned regularly by gently tapping them to dislodge dust or by rinsing with water if heavily soiled. Allow them to air dry completely before reinstallation. Replace if damaged or if suction significantly decreases.
• Foam Wet Filter: After wet pickup, rinse the foam filter with water and allow it to air dry completely before storing or using again.

Image: A person installing a new filter into the Vacmaster Pro VK811PH, demonstrating the ease of filter replacement.

Collection Bag Replacement

Replace the Sealable Tear-Resistant Collection Bag when it is approximately two-thirds full or when suction power noticeably diminishes. Always use genuine Vacmaster replacement bags.

Whakapai Whānui

Horoia te taha waho o te horoi horoi me ngā taputapu ki te pānuitangaamp cloth. Ensure all components are dry before storage. Periodically check the hose for blockages and clear any obstructions.

Raparongoā

If you encounter issues with your Vacmaster Pro, refer to the following common problems and solutions:

Whakatakotoranga

Pūtāhui me te Tautoko

Nga korero Whakaputanga

This Vacmaster Pro VK811PH wet/dry vac comes with a 1-tau iti pūtāhui mai i te ra o te hokonga. Ka kapi tenei raihana i nga hapa o nga rawa me nga mahi i raro i te whakamahinga noa. Tena koa pupurihia to tohu mo te hoko mo nga kereme whakamana.

Tautoko Kiritaki

For technical assistance, replacement parts, or warranty inquiries, please contact Vacmaster customer support. Refer to the product packaging or the official Vacmaster webpae mo nga korero whakapā o naianei.