Intermec PM43 Series Industrial Label Printer User Manual

1. Kupu Whakataki me Nekeview

The Intermec PM43 and PM43c are mid-range industrial label printers designed for reliable performance in various environments. These printers feature a tamper-proof, 10-language color touch-screen or universal-icon interface, aiming to reduce workforce training and support requirements. As a third-generation Intermec industrial printer, the PM43 series is engineered for maximum uptime, offering quick deployment, fast print speeds, and proven reliability for label printing applications.

Whakaahua 1.1: Taha-mua view of the Intermec PM43 Industrial Label Printer. This image shows the printer's compact design, control panel with a screen and keypad, and the label output slot.

2. Nga korero haumaru

Please read and understand all safety instructions before operating the printer. Failure to follow these instructions may result in injury or damage to the equipment.

• Honoa tonutia te pūreretā ki tētahi putanga hiko e hono ana ki te whenua.
• Do not operate the printer with damaged power cords or plugs.
• Puritia nga ringa me nga kakahu matara mai i nga waahanga neke i te wa e mahi ana.
• Avoid touching the printhead immediately after printing, as it can be hot.
• Ensure adequate ventilation around the printer.
• Use only approved media and ribbons to prevent damage and ensure optimal performance.

3. Tatūnga

3.1 Te Wetewete me te Whakanoho

Carefully remove the printer from its packaging. Place the printer on a stable, level surface with adequate space for media loading and access to power and data ports.

3.2 Te Hononga i ngā Taura Hiko me ngā Taura Raraunga

Connect the power cord to the printer and then to a grounded electrical outlet. For data communication, connect a USB cable to the printer's USB port and your computer, or an Ethernet cable to the printer's Ethernet port and your network.

Whakaahua 3.1: Whakamuri view of the Intermec PM43 printer. This image highlights the various connectivity ports, including power input, Ethernet, and USB ports, located on the back panel.

Whakaahua 3.2: Whakatata view of the Intermec PM43 printer's rear ports. This detailed image shows the power input, Ethernet port, and USB ports for connecting to a computer or network.

3.3 Loading Media (Labels and Ribbon)

Open the printer's top cover. Follow the internal diagrams for correct loading of label media and thermal transfer ribbon (if applicable). Ensure the media is properly aligned and secured by the guides.

Figure 3.3: Intermec PM43 printer with the top cover open. This view illustrates the internal mechanism for loading label rolls and thermal transfer ribbons, with various rollers and guides visible.

4. Nga Tohutohu Whakahaere

4.1 Te Whakakaha me te Arataki

Press the power button to turn on the printer. The printer will perform a self-test and initialize. The color touch-screen or universal-icon interface will display the ready status.

4.2 Te Whakatere i te Atanga Kaiwhakamahi

Use the touch-screen or keypad to navigate through the printer's menus. Common functions include print settings, media calibration, and network configuration. Refer to the on-screen prompts for specific operations.

4.3 Tapanga Tapanga

Once the printer is connected to your computer or network and configured, send print jobs from your label design software. The PM43 supports various language emulations including DSim, Fingerprint, and IPL, ensuring compatibility with existing systems.

5. Tiaki

5.1 Cleaning the Printhead

Regularly clean the printhead to ensure optimal print quality and extend its lifespan. Use a lint-free cloth moistened with isopropyl alcohol. Power off the printer and allow the printhead to cool before cleaning.

5.2 Cleaning Rollers and Media Path

Inspect and clean the media rollers and path to prevent dust and adhesive buildup, which can cause media jams or poor print quality. Use a soft, damp kakahu.

5.3 Replacing Media and Ribbon

When media or ribbon runs out, follow the loading instructions in Section 3.3. Ensure proper tension and alignment for continuous operation.

6. Te Raru

This section addresses common issues you might encounter with your Intermec PM43 printer.

• Kore Mana: Check power cord connections and ensure the outlet is functional.
• He Rawe te Kounga Ta: Clean the printhead (Section 5.1). Ensure media and ribbon are correctly loaded and compatible. Adjust print darkness settings via the printer interface.
• Ngā Pūmau Pāpāho: Open the printer cover and carefully remove any jammed media. Ensure media is loaded correctly and guides are adjusted.
• Kaore te Kairereta i te whakautu: Verify data cable connections (USB/Ethernet). Restart the printer and the connected computer/network device. Check printer status on the interface for error messages.
• Nga take hono: For Ethernet, check network cable and network settings on the printer. For USB, ensure drivers are installed on the computer.

For persistent issues, consult the detailed error messages displayed on the printer's interface or refer to the manufacturer's online support resources.

7. Whakatakotoranga

8. Pūtāhui me te Tautoko

8.1 Nga Korero Whakaputanga

This Intermec PM43 printer comes with a Limited Warranty. Please refer to the warranty documentation provided with your purchase for specific terms, conditions, and duration.

8.2 Tautoko Hangarau

For technical assistance, driver downloads, or further troubleshooting, please visit the official Intermec support website or contact their customer service department. Have your printer's model number (PM43A11000000201) and serial number ready when contacting support.