Kupu Whakataki
The iRobot Roomba 650 Robot Vacuum is designed to provide automated floor cleaning. This manual provides essential information for the proper setup, operation, and maintenance of your device.
Nga waahanga matua
- iAdapt Navigation: Utilizes a comprehensive sensor suite to navigate and adapt to various home environments.
- 3-StagPūnaha Horoi e: Effectively agitates, brushes, and suctions floors to pick up dust, pet hair, and debris.
- Whakahōtaka: Allows for convenient scheduling of cleaning cycles up to seven times per week.
- Automatic Docking: The robot automatically returns to its Home Base to recharge.
- Pro Itifile Hoahoa: At 3.6 inches tall, it is designed to clean under most furniture and kickboards.
- Multi-Surface Adaptability: Automatically adjusts to clean various floor types including carpet, tile, hardwood, and laminate.
Tatūnga
- Wewete: Remove the Roomba robot and all accessories from the packaging.
- Utu Pūhiko: Ensure the battery is fully charged before first use. Place the Roomba on its Home Base. The CLEAN button will pulse amber while charging and turn solid green when fully charged. A full charge can take up to 3 hours.
- Position Home Base: Place the Home Base on a hard, level surface against a wall. Ensure there is at least 1.5 feet (0.5 meters) of clear space on each side of the Home Base and 4 feet (1.2 meters) in front of it. Keep the area clear of obstacles and virtual walls.
- Whakaritea te Wāhi Horoi: Remove excess clutter from floors, such as cables, small rugs, or lightweight items that could obstruct the robot.
Nga Tohutohu Whakahaere
Te Timata i te Huringa Whakapai
- Timata A-ringa: Pehia te MAA button once to wake up the Roomba. Press MAA again to start a cleaning cycle.
- Te Wahi Ma: For concentrated cleaning of a small area, place the Roomba over the debris and press the WAHI button. The robot will clean in a spiral pattern approximately 3 feet (1 meter) in diameter.
- Tatari/Toki ano: Hei whakamutu i tetahi huringa horoi, pehia te MAA patene Press MAA ano ki te timata ano.
- End Cycle/Dock: To end a cleaning cycle and send the Roomba back to its Home Base, press the WAKA pātene.
Scheduling Cleaning Times
- Tautuhi Karaka: Perehi KARAKA, ka whakamahi HOUR a MINI ki te whakarite i te wa o naianei. Perehi KARAKA ano ki te whakaora.
- Tautuhi Hōtaka: Perehi Apiti, ka whakamahi RA, HOUR, a MINI to set your desired cleaning time for each day. Press Apiti ano ki te whakaora.
Te tiaki
Regular maintenance ensures optimal performance of your Roomba. Perform these steps regularly:
- Ipu Puehu Putua: Empty the dust bin after each cleaning cycle. Press the bin release button and slide out the bin.
- Tātari Ma: Remove the filter from the dust bin and tap it against a trash can to remove debris. Replace the filter every 2-3 months.
- Ngā Paraihe Ma: Remove the main brushes and side brush. Use the included cleaning tool to remove hair and debris wrapped around them.
- Clean Front Caster Wheel: Pull firmly on the front caster wheel to remove it. Clear any hair or debris from the wheel and its housing.
- Pūoko Ma: Wipe the charging contacts on the robot and Home Base, and the cliff sensors on the bottom of the robot, with a clean, dry cloth.
Raparongoā
| Putanga | Rongoā |
|---|---|
| Roomba not charging or docking. | Ensure the Home Base is placed in an open area with sufficient clearance. Clean the charging contacts on both the robot and the Home Base. Verify the power cord is securely plugged into the Home Base and the wall outlet. |
| Roomba gets stuck frequently. | Clear the cleaning area of loose cables, small rugs, or other obstacles. Use Virtual Wall barriers to block off problem areas. Ensure the brushes are free of tangled hair and debris. |
| Te whakaiti i te mahi horoi. | Empty the dust bin. Clean or replace the filter. Clean the main brushes and side brush to remove tangled hair and debris. |
| Roomba is unusually loud. | Check the brushes for any obstructions or tangled hair. Ensure the dust bin is properly seated. If the noise persists, contact customer support. |
Whakatakotoranga
- Waitohu: iRobot
- Tauira: Roomba 650 (R650)
- Tae: Pango
- Rahi Hua: 13.4 x 3.6 x 13.4 inihi
- Taumaha Tūemi: 5.28 pauna
- Puna Hiko: Ma te Puhiko (1 te pākahiko Lithium Ion kei roto)
- Voltage: 14.4 Volts
- Momo Tātari: Kōpae
- Tikanga Mana: Paa
- Taunakitanga Mata: Hardwood, Carpet, Linoleum, Tile
- Nga waahanga motuhake: 60 minute runtime, Scheduling, Thorough coverage
Pūtāhui me te Tautoko
The iRobot Roomba 650 Robot Vacuum comes with a 1-tau iti pūtāhui from the date of purchase. For detailed warranty information, product support, or to purchase replacement parts, please visit the official iRobot webpaetukutuku, whakapā atu rānei ki te ratonga kiritaki a iRobot.
Ka kitea e koe etahi atu rauemi me nga korero whakapā i runga i te Toa iRobot i runga i a Amazon.
