1. Kupu Whakataki
This manual provides essential information for the safe and efficient operation of your RCF NX10-SMA 10-inch 2-Way Coaxial Monitor. Please read this manual thoroughly before using the product to ensure proper setup, operation, and maintenance. Retain this manual for future reference.
Whakaahua 1: Mua view of the RCF NX10-SMA coaxial monitor, showcasing its protective grille and compact design.
2. Nga korero haumaru
Kia mau tonu ki nga whakaritenga haumaru e whai ake nei hei aukati i te ru hiko, te ahi, te whara ranei:
- Tuku Hiko: Honoa te waeine ki te pūhiko hiko kua tohua anaketage. Me whakarite kei te kore e pakaru te taura hiko, ā, kei te tika hoki te hononga whenua.
- Whakahau: Kaua e araia nga whakatuwheratanga hau. Me whakarite kia pai te rere o te hau huri noa i te waahanga kia kore ai e wera rawa.
- makuku: Kaua e tukua te waeine ki te ua, ki te makuku rānei. Kaua e waiho he wai ki runga, ki te taha rānei o te waeine.
- Ratonga: Kaua e tarai ki te mahi i tenei hua maau ake. Tirohia nga ratonga katoa ki nga kaimahi tohu tohu.
- Turanga: Ensure the unit is placed on a stable surface or securely mounted to prevent it from falling.
- Parenga Rongo: Prolonged exposure to high sound pressure levels can cause permanent hearing damage. Use appropriate hearing protection when operating the unit at high volumes.
3. Tatūnga
3.1 Te Wetewete
Carefully remove the RCF NX10-SMA monitor from its packaging. Inspect the unit for any signs of damage that may have occurred during transit. If damage is found, contact your dealer immediately.
3.2 Te Whakanoho a tinana
The NX10-SMA is designed for versatile placement, commonly used as a stage monitor. Its angled cabinet allows for optimal sound projection towards the performer. Ensure the monitor is placed on a stable, flat surface or securely mounted.
Whakaahua 2: Taha view of the RCF NX10-SMA monitor, illustrating its angled profile pai mo stage aroturukitanga.
3.3 Hononga
Refer to the rear panel for all input and output connections. Ensure all connections are secure before powering on the unit.
- Tāuru AC: Connect the provided power cable to the AC INPUT socket.
- AC Link: Use the AC LINK output to daisy-chain power to other compatible RCF units. Do not exceed the maximum current rating.
- Tāuru: Connect your audio source (e.g., mixer, instrument) to the INPUT XLR connector.
- Hononga: Use the LINK XLR output to send the audio signal to another NX10-SMA unit or other audio equipment.
Figure 3: Rear panel of the RCF NX10-SMA, detailing the AC input/link, audio input/link, and control knobs.
4. Mahi
4.1 Kei te Hiko / Weto
After all connections are made, switch the power button located on the rear panel to the 'ON' position. To power off, switch the button to 'OFF'. It is recommended to power on your monitors last and power them off first in your audio chain.
4.2 Mana Rōrahi
Adjust the 'VOLUME' knob on the rear panel to set the desired output level. Start with the volume at a low setting and gradually increase it to prevent sudden loud sounds.
4.3 Input Sensitivity/EQ Presets
The NX10-SMA may feature controls for input sensitivity or EQ presets (e.g., 'STAGE', 'MAIN', 'BOOST'). Consult the labels on the rear panel (refer to Figure 3) and adjust these settings according to your application and desired sound profile.
5. Tiaki
5.1 Te horoi
Clean the exterior of the unit with a soft, dry cloth. Do not use abrasive cleaners, solvents, or waxes. Ensure no liquids enter the unit.
5.2 Rokiroki
When not in use, store the RCF NX10-SMA in a dry, dust-free environment, away from extreme temperatures. If transporting, use appropriate protective cases.
5.3 Tiakitanga Whanui
Regularly check cables for wear and tear. Avoid dropping or subjecting the unit to strong impacts.
6. Te Raru
If you encounter issues with your RCF NX10-SMA, refer to the following common problems and solutions:
- Kore Oro:
- Me whakarite kei te whakakā te waeine, ā, kei te hono pūmau te taura hiko.
- Check that the audio source is active and connected correctly to the INPUT.
- Verify the 'VOLUME' knob is not set to minimum.
- Test with a different audio cable.
- Oro korikori:
- Whakaitihia te taumata whakauru mai i to puna ororongo.
- Lower the 'VOLUME' knob on the monitor.
- Tirohia mēnā he taura kua pakaru.
- Waehe Kaore i te Whakahiko:
- Ensure the power cable is fully inserted into both the unit and the power outlet.
- Tirohia te putanga hiko me tetahi atu taputapu.
- Manatokohia kei te 'ON' te whakakā hiko.
Mena ka mau tonu te raruraru i muri i te whakamātau i ēnei otinga, whakapā atu ki te ratonga kiritaki a RCF, ki tētahi tohunga ratonga tohunga rānei.
7. Whakatakotoranga
The following table outlines the key specifications for the RCF NX10-SMA 10-inch 2-Way Coaxial Monitor:
| Āhuahira | Whakatakotoranga |
|---|---|
| Kaihanga | RCF |
| Tau tauira | NX10-SMA |
| Hunga Hua | 20 x 19.7 x 15.9 inihi |
| Taumaha Tūemi | 38.8 pauna |
| Momo Whakaeke | Wall Mount (Note: Requires compatible mounting hardware, sold separately) |
| Tatau Waeine | 1.0 Tatau |
| He parewai | He teka |
8. Nga Korero Whakaputanga
For detailed warranty information, please refer to the warranty card included with your product or visit the official RCF webpae. Ka rereke pea nga tikanga me nga tikanga mo ia rohe me nga kaihoko.
9. Tautoko Kiritaki
If you require technical assistance, have questions about your RCF NX10-SMA, or need to report a service issue, please contact RCF customer support or your authorized RCF dealer. Contact information can typically be found on the RCF official webpae, i roto ranei i to tuhinga hua.
