Pukapuka Kaiwhakamahi mō te Rīpene Whakamahana Rapa Hikorikori BriskHeat XtremeFLEX BS0

Kupu Whakataki me nga Korero Haumaru

This manual provides essential information for the safe and effective use of your BriskHeat XtremeFLEX BS0 Silicone Rubber Heating Tape. Please read all instructions carefully before installation and operation.

PANUI WHAKAMAHI: A temperature controller is e hiahiatia ana for the safe operation of this heating tape. Failure to use a temperature controller can result in overheating, product damage, fire, or personal injury. This heating tape is designed for industrial and scientific applications and should only be used by qualified personnel.

The heating tape is moisture and chemical resistant and suitable for electrically conductive surfaces. Do not exceed the maximum exposure temperature of 450°F (232°C).

Ka mutu te huaview

Whakaahua 1: BriskHeat XtremeFLEX BS0 Silicone Rubber Heating Tape. This image shows the flexible silicone rubber heating tape, which is wrapped around a metallic rod, illustrating its application for heating cylindrical objects or pipes. The tape has a distinct reddish-brown color and a textured surface.

The BriskHeat XtremeFLEX BS0 Silicone Rubber Heating Tape features a silicone rubber extruded outer sheath with a fiberglass knitted and braided construction, ensuring durability and flexibility. It incorporates a multi-stranded resistance wire for efficient heating.

• Rauemi: Silicone Rubber Extruded Outer Sheath with Fiberglass, Knitted and Double-Braided.
• Ātete: Moisture and chemical resistant.
• Ngawari: Exceptional flexibility for various applications.
• Arataki: 24in (610mm) power leads on the same end with a separable standard 2-prong power plug (NEMA 1-15).

Tatūnga me te Tāuta

1. Inspect the Tape: Before installation, visually inspect the heating tape for any signs of damage, cuts, or abrasions. Do not use if damaged.
2. Whakaritea te Mata: Ensure the surface to be heated is clean, dry, and free from sharp edges that could damage the tape.
3. Takaia te Ripene: Carefully wrap the heating tape around the object or surface requiring heat. Ensure even contact and avoid overlapping the tape excessively, which can lead to hot spots. For optimal heat distribution, maintain consistent spacing between wraps.
4. Whakamaua te Rīpene: Use appropriate high-temperature tape or clamps (not included) to secure the heating tape in place, preventing it from unwrapping or shifting during operation.
5. Hono ki te Kaiwhakahaere: Connect the 2-prong power plug of the heating tape to a suitable temperature controller (sold separately). Ensure the controller's specifications match the heating tape's requirements (120VAC, 627 Watts).
6. Whakapapa: Ensure proper grounding of the system as per local electrical codes.

Tuhipoka: This heating tape is suitable for electrically conductive surfaces.

Nga Tohutohu Whakahaere

1. Set Temperature Controller: Power on your temperature controller and set the desired operating temperature. Refer to your temperature controller's manual for specific instructions on setting parameters.
2. Aroturuki Pawera: Continuously monitor the temperature of the heated object or surface to ensure it remains within safe and desired limits.
3. Nga tono: This heating tape is ideal for a wide range of applications, including:
   • Heating laboratory apparatus
   • Gas tubing
   • Temporary heat applications
   • Valves and pipes
   • Whakatio tiaki
4. Weto Whakakore: When heating is no longer required, turn off the temperature controller and disconnect the heating tape from the power source.

Te tiaki

• Tirotiro auau: Periodically inspect the heating tape for any signs of wear, damage, or degradation of the silicone sheath. Pay close attention to the power leads and connections.
• Te horoi: If necessary, clean the heating tape with a soft, damp cloth. Do not use abrasive cleaners or solvents that could damage the silicone. Ensure the tape is completely dry before re-applying power.
• Rokiroki: When not in use, store the heating tape in a clean, dry place, away from direct sunlight and extreme temperatures. Avoid sharp bends or kinks that could damage the internal heating element.
• Whakatikanga Ngaio: Do not attempt to repair damaged heating tape. Contact BriskHeat or a qualified technician for assistance.

Raparongoā

If problems persist after attempting these solutions, contact BriskHeat customer support.

Whakatakotoranga

• Tauira: BS0201060L
• Dimensions (W x L): 2in (51mm) x 72in (1830mm)
• Watts Tapeke: 627 Watts
• Voltage: 120VAC
• Kiato Hiko: 4.3w/sq in (0.007w/sq mm)
• Paemahana Puranga Morahi: 450°F (232°C)
• Rauemi: Silicone Rubber Extruded Outer Sheath with Fiberglass, Knitted and Double-Braided
• Arataki: 24in (610mm) power leads on the same end with a separable standard 2-prong power plug (NEMA 1-15)
• Ātete: Moisture and chemical resistant
• Hototahi: Suitable for electrically conductive surfaces
• He taputapu e hiahiatia ana: Temperature Controller (Sold Separately)

Pūtāhui me te Tautoko

For information regarding product warranty, please refer to the official BriskHeat warranty policy available on their website or contact BriskHeat directly.

For technical support, product inquiries, or service, please contact BriskHeat customer service.
Visit the BriskHeat Store on Amazon