Diversitech A/C Secondary Plastic Condensate Drain Pan User Manual

1. Hua Neke Atuview

The Diversitech A/C Secondary Plastic Condensate Drain Pan (Model 6-3060L) is designed to collect and contain condensate overflow from air conditioning and HVAC units. This secondary pan provides an essential layer of protection against water damage to your property in the event of a primary drain line blockage or failure.

Ko nga ahuatanga matua ko:

• Rolled Edges: Engineered for enhanced durability and structural integrity.
• Reinforced Corners: Provides additional strength in critical stress points.
• Ribbed Bottoms: Designed to increase the pan's overall strength and stability.
• 3/4" PVC Fittings: Pre-attached fittings simplify connection to a secondary drain line.
• Rahi Pai: Measuring 30" x 60" with a 2" depth, suitable for various A/C unit sizes.

Figure 1: Diversitech A/C Secondary Plastic Condensate Drain Pan (Model 6-3060L)

2. Nga korero haumaru

Please read and understand all safety precautions before handling or installing the drain pan.

• Taputapu Tiaki Whaiaro: Wear appropriate personal protective equipment (PPE) such as gloves and safety glasses when handling the pan, especially during installation or maintenance.
• Hiki: The pan is large. Use proper lifting techniques or seek assistance to avoid injury.
• Tapa Koi: Although designed with rolled edges, exercise caution to prevent cuts or scrapes.
• Pūmate Hiko: Ensure all power to the HVAC unit is disconnected before working near electrical components or wiring.
• Ngā Tūponotanga Wai: Be aware of potential water spills during installation or maintenance. Ensure proper drainage to prevent slip hazards or electrical shorts.
• Matū: If using cleaning agents for maintenance, follow manufacturer's instructions and safety warnings for those products.

3. Tāutanga

Proper installation of the secondary drain pan is crucial for effective condensate management and preventing water damage.

1. Whakaritenga:
   • Ensure the area beneath the HVAC unit is clean, dry, and free of debris.
   • Verify that the surface where the pan will rest is level and stable to ensure proper drainage.
2. Turanga:
   • Carefully position the secondary drain pan directly underneath the indoor HVAC unit (evaporator coil) to catch any overflow from the primary drain pan.
   • Ensure the pan is centered and extends beyond the footprint of the unit to adequately capture any potential leaks.
3. Drain Line Connection:
   • Connect a 3/4" PVC drain line to the pre-attached fittings on the pan. Ensure a tight, leak-free connection.
   • Route the secondary drain line to an appropriate discharge location, such as outdoors, a utility sink, or a floor drain, in accordance with local building codes.
   • Ensure the secondary drain line has a continuous downward slope to allow for gravity drainage.
4. Optional Safety Switch (Recommended):
   • For enhanced protection, consider installing a float switch (e.g., Diversitech Wet Switch) in the secondary drain pan. This switch will shut down the HVAC unit if water accumulates in the secondary pan, preventing overflow and potential damage.
   • Follow the float switch manufacturer's installation instructions.
5. Taki Whakamutunga:
   • Visually inspect all connections for leaks.
   • Confirm the pan is stable and correctly positioned.

4. Mahi

The Diversitech Secondary Condensate Drain Pan operates passively. Its primary function is to serve as a backup containment system for condensate water in the event that the primary HVAC drain system fails or becomes clogged. When water accumulates in the secondary pan, it will be directed through the connected secondary drain line to prevent overflow.

If a float switch is installed, the HVAC unit will automatically shut down upon water detection in the secondary pan, signaling a problem that requires immediate attention.

5. Tiaki

Regular inspection and maintenance of your secondary condensate drain pan can help ensure its effectiveness and longevity.

• Tirohanga Ia Wa: At least once a year, or more frequently during peak cooling seasons, inspect the pan for any signs of water accumulation, cracks, or damage.
• Te horoi: If water or debris is found in the pan, clean it thoroughly. Use a mild detergent and water, then rinse completely. Ensure the pan is dry before placing it back.
• Tirotiro i te Raina Waikeri: Verify that the secondary drain line is clear and free of obstructions. Algae or mold can build up and cause blockages. If necessary, flush the line with a mixture of water and a small amount of bleach (1 part bleach to 10 parts water) or a specialized condensate drain cleaner.
• Float Switch Test (if installed): Periodically test the float switch by manually lifting the float or pouring a small amount of water into the pan to ensure it triggers the HVAC unit shutdown.

6. Te Raru

If you encounter issues with your secondary condensate drain pan, consider the following:

For complex issues or if you are uncomfortable performing these checks, it is always recommended to contact a qualified HVAC technician.

7. Whakatakotoranga

8. Raihana me te Tautoko

The Diversitech A/C Secondary Plastic Condensate Drain Pan (Model 6-3060L) is manufactured to high-quality standards. For specific warranty information, including terms, conditions, and duration, please refer to the official documentation provided with your purchase or visit the official Diversitech webpae.

For technical support, product inquiries, or assistance with installation and troubleshooting, please contact Diversitech customer service directly. Contact information can typically be found on the product packaging or the manufacturer's official webpae.

Kaihanga: DiversiTech
www.diversitech.com