AGPTEK 24-Pack Flameless LED Tea Lights with Timer Function User Manual

1. Kupu Whakataki

The AGPTEK Flameless LED Tea Lights provide a safe and convenient alternative to traditional candles. These battery-operated tea lights feature a flickering warm white light effect and an integrated timer function, making them suitable for various decorative purposes without the concerns of open flames or melting wax. This manual provides instructions for the proper setup, operation, and maintenance of your LED tea lights.

AGPTEK Flameless LED Tea Lights displayed in a glass holder with decorative elements, showcasing their warm glow.

2. Nga korero haumaru

• Tiakina nga pākahiko kia kore e taea e nga tamariki me nga kararehe.
• Kaua e hanumi nga pākahiko tawhito me nga pākahiko hou, nga momo pākahiko rereke ranei.
• Makahia nga pākahiko kua whakamahia kia rite ki nga ture a rohe.
• Do not expose the tea lights to extreme temperatures or direct sunlight for prolonged periods.
• These tea lights are not waterproof. Avoid contact with water or moisture.

Comparison of LED candles versus traditional candles, illustrating the benefits of LED candles: energy-saving, flameless, no dripping wax, and no risk of fire.

3. Ihirangi mokete

Manatokona kei roto katoa nga mea kei roto i to kete:

• 24 x LED Tealight Candles
• 24 x CR2032 Coin Batteries (pre-installed inside the candles)

4. Tatūnga

Tāuta Pūhiko

The AGPTEK LED tea lights come with CR2032 button cell batteries pre-installed. If you need to replace the battery:

1. Locate the battery compartment cover on the bottom of the tea light.
2. Use a small coin or screwdriver to gently open the cover.
3. Tangohia te pākahiko CR2032 tawhito.
4. Whakauruhia he pākahiko CR2032 hou me te taha pai (+) e anga whakarunga ana.
5. Me tino kati te taupoki o te waahanga o te papahiko.

Taipitopito view of the AGPTEK LED tea light, illustrating its dimensions (36mm/1.4inch diameter and height) and the battery compartment with a CR2032 button cell for easy replacement.

5. Nga Tohutohu Whakahaere

Te Hiko / Whakaweto

Each tea light has a small slide switch located on its bottom. To turn the tea light ON, slide the switch to the 'ON' position. To turn it OFF, slide the switch to the 'OFF' position.

Mahi Matawā

The AGPTEK LED tea lights feature an automatic timer function. Once you turn the switch to the 'ON' position, the tea light will illuminate for 6 hours, then automatically turn off for 18 hours. This 24-hour cycle will repeat daily. To reset the timer, simply turn the tea light OFF and then ON again at your desired start time.

Diagram illustrating the ON/OFF switch on the bottom of the tea light and the 6-hour on, 18-hour off timer cycle for automatic operation.

6. Tiaki

Te horoi

To clean the tea lights, gently wipe them with a soft, dry cloth. Do not use abrasive cleaners or immerse them in water.

Whakakapinga Pūhiko

When the light appears dim or stops working, it is time to replace the CR2032 battery. Refer to the 'Battery Installation' section under 'Setup' for detailed instructions.

7. Te Raru

• Tea light does not turn on: Ensure the switch is in the 'ON' position. Check if the battery is correctly installed with the positive (+) side up. Replace the battery if it is depleted.
• He ngoikore te mārama: He tohu tēnei kua iti te pākahiko. Whakakapia te pākahiko CR2032.
• Timer function not working as expected: Ensure the tea light was turned ON at the desired start time. The timer cycle begins from the moment the switch is set to 'ON'. To reset, turn OFF and then ON again.

8. Whakatakotoranga

9. Pūtāhui me te Tautoko

For warranty information or technical support, please refer to the product packaging or contact AGPTEK customer service through the retailer where the product was purchased. Please retain your proof of purchase for any warranty claims.