Kupu Whakataki
This manual provides essential information for the proper setup, operation, and maintenance of your Clear-Com CC-300-X4 Single-Ear Headset. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
Image: The Clear-Com CC-300-X4 Single-Ear Headset, featuring a black over-ear earcup, an adjustable microphone boom, and an XLR connector cable. The headset is designed for professional communication environments.
The Clear-Com CC-300-X4 is a single-ear headset designed for professional communication systems. It features high ambient-noise attenuation headphones and a hyper-cardioid dynamic microphone, ensuring clear audio transmission and reception. The headset is built for comfort during prolonged use, with a flexible design and a soft ear-pad. Its microphone boom can rotate 300 degrees and includes an integrated On/Off switch for quick muting.
Ihirangi mokete
Manatokona kei roto katoa nga mea kei roto i te kete:
- Clear-Com CC-300-X4 Single-Ear Headset
- XLR Connection Cable
- Pukapuka Kaiwhakamahi (tenei tuhinga)
Tatūnga
- Honoa te Paneoro: Locate the 4-pin female XLR connector on the headset cable. Connect this to a compatible 4-pin male XLR port on your professional audio equipment or intercom system. Ensure the connection is secure.
- Whakatikatika: Place the single earcup over one ear. Adjust the headband for a comfortable and secure fit. The soft ear-pad should rest comfortably against your ear.
- Turanga Microphone: Rotate the microphone boom to position the hyper-cardioid dynamic microphone approximately 1-2 inches from the corner of your mouth. The 300-degree rotation allows for precise placement.
Nga Tohutohu Whakahaere
Wahanguoroorooro
The microphone boom features an integrated On/Off switch for quick muting:
- To Activate Microphone: Rotate the microphone boom down towards your mouth. The microphone will automatically activate.
- To Mute Microphone: Rotate the microphone boom upwards, away from your mouth. The microphone will automatically mute.
Arotakenga Ororongo
Listen to incoming audio through the single earcup. The enclosed earphone design provides high ambient-noise attenuation, helping to isolate the audio from external distractions.
Comfort and Prolonged Use
The headset is designed for durable and comfortable wear during prolonged use. Ensure the fit is snug but not overly tight to prevent discomfort over long periods.
Te tiaki
Mā te tiaki tika ka roa te ora me te mahi a tō pane whakarongo.
- Te horoi: Use a soft, dry cloth to wipe down the headset and cable. For the ear-pad, a slightly damp cloth with mild soap can be used, but ensure it is completely dry before use. Avoid using harsh chemicals or abrasive cleaners.
- Rokiroki: Store the headset in a clean, dry place away from extreme temperatures and direct sunlight. Avoid tangling the cable.
- Tiaki taura: Do not pull on the cable to disconnect the headset. Always grasp the XLR connector firmly. Avoid sharp bends or kinks in the cable.
- Pūorooro Pūoro: Handle the microphone boom gently. While it is designed for 300-degree rotation, avoid forcing it beyond its natural range of motion.
Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| No audio from earcup | Cable not fully connected; Audio source issue; Headset fault. | Ensure XLR cable is securely connected. Verify audio source is active and sending signal. Test headset with another compatible device if possible. |
| Kāore te hopuoro e tuku | Microphone muted; Cable connection issue; Microphone fault. | Ensure microphone boom is rotated down (unmuted). Check XLR cable connection. Test microphone with another compatible device. |
| Poor audio quality (static, distortion) | Loose connection; Interference; Damaged cable/headset. | Check all connections. Move away from potential sources of electromagnetic interference. Inspect cable and headset for visible damage. |
Whakatakotoranga
- Tauira: Clear-Com CC-300-X4
- Momo Paneoro: Takitahi-taringa
- Momo Puoro: Kua kohia
- Momo hopuoro: Hyper-Cardioid Dynamic
- Hononga: Wired, 4-pin Female XLR
- Impedance (Microphone/Earpiece): 200 ohm / 400 ohms
- Awhe Auautanga: 40Hz – 20kHz
- Mana Haruru: Sound Isolation, Noise Cancellation
- Rauemi Paoro: hiako
- Rahi Hua: 6 x 3 x 4 inihi (tata)
- Taumaha Tūemi: 12 hekere (tata)
- Kaihanga: Clear-Com
- UPC: 663647922762, 700867468219
Pūtāhui me te Tautoko
For warranty information and technical support, please refer to the official Clear-Com webpaetukutuku, whakapā atu ranei ki ta raatau ratonga kaihoko. Puritia to riirii hoko hei tohu mo te hoko mo nga kereme whakamana.
Clear-Com Official Webpae: www.clearcom.com
Tuhipoka: Ka rereke pea nga tikanga me nga tikanga mo te rohe me nga kaihoko.
