Kupu Whakataki
The Extech PRC30 is a handheld multifunction process calibrator designed for verifying the operation of various industrial instruments. It is suitable for use with sensors, thermocouple probes, controllers, panel meters, and other testing tools, particularly in temperature control and process troubleshooting applications.
Whakaahua 1: Mua view of the Extech PRC30 Multifunction Process Calibrator, highlighting its display and control panel.
Nga waahanga hua
- Multifunction capability for various process calibration tasks.
- Handheld design for portability and ease of use.
- Dot matrix LCD for clear display of readings and settings.
- Intuitive button layout for operation.
Tatūnga
Tāuta Pūhiko
- Kimihia te uhi o te wahanga pākahiko kei muri o te taputapu.
- Open the cover by sliding or unscrewing it as indicated.
- Insert the required batteries (type not specified, but typically AA or AAA) ensuring correct polarity.
- Whakakapihia te uhi o te wahanga pākahiko kia mau.
Nga Tohutohu Whakahaere
Controls and Display Overview
The Extech PRC30 features a clear dot matrix LCD and a user-friendly control panel. Refer to Figure 1 for button locations.
- Power Button (Orange, circular with power symbol): Press to turn the calibrator ON or OFF.
- Ngā Pātene Pere (Runga, Raro, Mauī, Matau): Used for navigation, adjusting values, and selecting options.
- PATU Whakatakotoria: Ka whakaū i ngā kōwhiringa, ka tomo rānei ki ngā tahua tautuhinga.
- UNIT Button (under TYPE): Changes the measurement unit (e.g., °F, °C).
- I/O Button (under MODE): Toggles between input and output modes.
- MEM Button (under STEP): Accesses memory functions, such as saving or recalling data.
- ZERO Button (under ZERO, with lightbulb symbol): Performs zero adjustment or backlight control.
- CJC (Cold Junction Compensation) Indicator: Indicates the status of cold junction compensation.
- APO (Auto Power Off) Indicator: Shows if the auto power off function is active.
- SOURCE Indicator: Indicates the device is in source mode.
- MEM.25 Indicator: Likely indicates a memory location or a specific memory function.
Mahi Taketake
- Whakahiko: Press the orange power button. The display will illuminate.
- Te whiriwhiri Aratau: Use the MODE (I/O) button to switch between input and output functions as required for your calibration task.
- Whakarite Uara: Use the Up/Down arrow buttons to adjust output values or navigate through menu options. The Left/Right arrow buttons may be used for digit selection or fine-tuning.
- Huri Waehe: Press the UNIT button to cycle through available measurement units (e.g., °F, °C).
- Kore Whakatikatika: Use the ZERO button to perform a zero adjustment for current measurements or to activate the display backlight.
- Nga Mahi Mahara: Press the MEM button to save current readings or recall previously stored data.
- Weto Whakakore: Press and hold the orange power button until the display turns off. The Auto Power Off (APO) function will also turn off the device after a period of inactivity.
Te tiaki
- Te horoi: Horoia te taputapu ki te ngohengohe, damp kakahu. Kaua e whakamahi i nga kai horoi me nga whakarewa.
- Rokiroki: Store the calibrator in a dry, cool environment when not in use. Remove batteries if storing for extended periods to prevent leakage.
- Whakakapinga Pūhiko: Replace batteries promptly when the low battery indicator appears on the display to ensure accurate operation.
- Whakatikatika: E taunakihia ana kia whakatikatikaina auautia e ngā kaimahi whai tohu hei pupuri i te tika o te ine.
Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kaore te taputapu i te hiko. | Nga pākahiko kua mate, kua he ranei te whakaurunga. | Tirohia te kaha o te pākahiko, ka whakakapi ki ētahi atu pākahiko hou. |
| Ko nga panui kore tika. | Needs calibration; environmental interference; incorrect settings. | Perform zero adjustment; ensure stable environment; verify measurement settings; consider professional calibration. |
| He putea, he atarua ranei te whakaaturanga. | Pūhiko iti; whakaweto te rama tuara. | Replace batteries; press the ZERO button to activate backlight. |
Whakatakotoranga
- Tauira: PRC30
- Whakaahuatanga: Kaihuri Tukatuka Maha
- Momo Whakaatu: Ira matrix LCD
- Ahu (Roa x Whanui x Teitei): 6.375 in (15.9 cm) x 3.25 in (8 cm) x 1.75 in (4.4 cm)
- Awhe Pawera Mahi: 41 ki te 104°F (5 ki te 40°C)
- Awhe haumākū whakahaere: <80%RH
- Puna Hiko: Pūhiko
- Taketake: Hanga i Taiwan
Pūtāhui me te Tautoko
The Extech PRC30 Multifunction Process Calibrator comes with a 1-Year Universal Guarantee.
For technical support, service, or warranty claims, please refer to the contact information provided with your purchase documentation or visit the official Extech Instruments webpae.
