Kupu Whakataki
Thank you for choosing the Keter Iowa Chair Grafite. This instruction manual provides essential information for the safe assembly, operation, maintenance, and care of your new outdoor armchair. Please read this manual thoroughly before assembly and keep it for future reference.
Image: Keter Iowa Chair Grafite, a dark grey outdoor armchair with a high backrest and a light grey seat cushion, featuring a woven rattan-like texture.
Nga korero haumaru
Ko to haumaru te mea nui. Kia mau ki nga aratohu haumaru e whai ake nei:
- Do not exceed the maximum recommended weight of 150 kg (approximately 330 lbs). Overloading can cause damage to the chair and potential injury.
- Keep the chair away from strong heat sources, such as open flames, heaters, or prolonged direct exposure to extreme temperatures, as this may deform or damage the plastic material.
- The chair is designed for both indoor and outdoor use. However, always follow specific care and maintenance recommendations for each environment to ensure longevity.
- Ensure all components are correctly assembled and securely fastened before use. Regularly check for loose parts.
Rarangi Waehanga
I mua i te tiimata o te huihuinga, tirohia kei te noho nga waahanga katoa me te kore e pakaru. Kei roto i te kete:
- Te tuara o te nohoanga
- Noho nohoanga
- Armrests (left and right)
- Legs (typically integrated or attachable)
- Assembly hardware (plastic bolts, nuts, and a wrench)
- urunga nohoanga
- Tohutohu (tenei tuhinga)
If any parts are missing or damaged, please contact Keter customer support.
Tatūnga me te Runanga
The Keter Iowa Chair Grafite requires assembly. Detailed assembly instructions are provided within the product packaging. Please follow the visual diagrams carefully.
- Wewetehia nga waahanga katoa ka whakatakoto ki runga i te mata ma, papatahi.
- Identify each part according to the assembly diagram.
- Begin by attaching the main structural components, ensuring all connections are aligned.
- Secure all connections using the provided plastic bolts and nuts. Hand-tighten initially, then use the included wrench for a firm, secure fit. Avoid over-tightening to prevent stripping the plastic.
- Attach the seat cushion to the chair.
- Once assembled, gently test the chair for stability before full use.
Tuhipoka: Some users have reported that assembly may require patience due to the precise nature of the plastic fittings. Ensure parts are correctly aligned before applying force.
Image: Dimensional diagram of the Keter Iowa Chair, illustrating its height, depth, and width for assembly reference.
Te Mahi me te Whakamahinga
The Keter Iowa Chair Grafite is designed for comfortable seating in various environments. Its key features include:
- High Backrest: The chair features a raised backrest designed for maximum comfort and support.
- Rattan Texture: The durable plastic material is molded with an attractive rattan-like texture, providing an elegant aesthetic suitable for garden, patio, or indoor settings.
- Included Seat Cushion: A comfortable seat cushion is provided for enhanced seating experience.
This chair is suitable for use in gardens, on balconies, patios, or as additional seating indoors. Always place the chair on a stable, level surface.
Image: Keter Iowa Chairs arranged on a balcony, demonstrating outdoor use.
Image: Keter Iowa Chairs in a garden, showcasintō rātou whānuitanga o ngā mahi.
Te tiaki
To ensure the longevity and appearance of your Keter Iowa Chair Grafite, follow these simple maintenance guidelines:
- Te horoi: Wipe the chair regularly with a damp cloth to remove dust and dirt. For more stubborn stains, use a mild soap solution and rinse thoroughly with water. Avoid abrasive cleaners or harsh chemicals, as these can damage the plastic.
- Tiaki urunga: The seat cushion can be spot cleaned with a mild detergent. Allow it to air dry completely before re-using or storing.
- Rokiroki: During prolonged periods of non-use, especially in harsh weather conditions (e.g., extreme cold, heavy snow, or intense sun), it is recommended to store the chair indoors or cover it with a protective cover to prevent premature wear and fading.
- Tirotiro: Periodically check all connections and fasteners to ensure they remain tight and secure. Re-tighten if necessary.
Image: Detail of the chair's rattan texture.
Image: Close-up of the armrest and side panel.
Image: Detail of the backrest texture.
Raparongoā
If you encounter any issues with your Keter Iowa Chair Grafite, consider the following common solutions:
| Raruraru | Te Take Taea / Rongoa |
|---|---|
| Chair feels unstable or wobbly after assembly. | Ensure all plastic bolts and nuts are fully tightened. Re-check that all components are correctly interlocked according to the assembly instructions. Sometimes, disassembling and reassembling a problematic joint can resolve alignment issues. |
| Te uaua i te wa e huihui ana. | Refer to the detailed pictorial instructions provided with the product. Ensure parts are oriented correctly before attempting to snap them together. Do not force components if they don't fit; re-check alignment. |
| Plastic appears discolored or faded. | Prolonged exposure to direct sunlight can cause fading over time. Store the chair indoors or use a protective cover when not in use for extended periods, especially during peak sun hours. |
If the problem persists or you encounter an issue not listed here, please contact Keter customer support for assistance.
Whakatakotoranga
| Huanga | Taipitopito |
|---|---|
| Ingoa Tauira | Iowa Chair Grafite |
| Tau tauira | 215526 |
| Waitohu | Ketere |
| Rauemi | Plastic (Rattan texture) |
| Tae | Grafite (Graphite) |
| Rahi Hua (L x W x H) | 60 x 62 x 89 cm (23.6 x 24.4 x 35 inihi) |
| Taumaha Hua | 6.7 kg (14.77 lbs) |
| Morahi Taumaha Rawa | 150 kg (330 lbs) |
| Teitei nohoanga | 42 cm (16.5 inihi) |
| Huihuinga e hiahiatia ana | Yes, instructions provided |
| Nga Waenga kei roto | Chair, Seat Cushion |
Pūtāhui me te Tautoko
Keter products are manufactured to high standards and undergo strict quality control. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official Keter webpae.
For any questions, technical support, or assistance with parts, please contact Keter customer service. You can often find contact details on the Keter webpae, ma te kaihokohoko ranei i hokona e koe te hua.
Visit the official Keter Store: Toa Keter i runga i a Amazon
