1. Hua Neke Atuview
This manual provides detailed instructions for the installation, operation, and maintenance of your Genuine OEM Honda Interior Rear View Mirror. Designed for optimal visibility and durability, this mirror is a direct replacement part ensuring a perfect fit and reliable performance for compatible Honda models.
Image 1: The Genuine OEM Honda Interior Rear View Mirror, showing its standard black housing and mounting arm.
Hototahi:
- 2003-2012 Honda Accord
- 2006-2011 Honda Civic
- 2010-2011 Honda Crosstour
- 2010-2014 Honda Insight
- 2011-2014 Honda CR-Z
2. Tatūnga me te Tāuta
Installing your new Honda Interior Rear View Mirror is a straightforward process. Ensure you have the necessary tools, typically a Phillips head screwdriver or an Allen wrench, depending on your vehicle's existing mirror mount.
2.1 Removing the Old Mirror
- Locate the Mounting Screw: On most Honda models, the mirror is secured to a bracket on the windshield with a small screw.
- Wetekina te tīwiri: Use the appropriate screwdriver or Allen wrench to loosen the screw. Do not remove it completely unless necessary.
- Detach the Mirror: Once loosened, gently twist the mirror counter-clockwise (or slide it upwards, depending on the design) to detach it from the windshield mounting bracket.
Video 1: Demonstration of how to install and remove a rear view mirror. This video illustrates the process of loosening the screw, detaching the mounting button, and sliding the mirror over the windshield bracket.
Video 2: Detailed guide on removing and replacing a rear view mirror on Honda Accord and Civic models, showing the twisting motion for removal and installation.
2.2 Te Tāuta i te Whakaata Hou
- Align the Mirror: Position the new mirror's mounting arm over the windshield bracket. Ensure the orientation is correct (the anti-glare lever should typically be at the bottom).
- Paheke me te Haumaru: Slide the mirror down onto the bracket until it clicks into place.
- Whakapaia te Tiu: Use the screwdriver or Allen wrench to tighten the securing screw on the mirror's mounting arm. Do not overtighten, as this can damage the mirror or bracket.
- Whakaritea te Koki: Once secured, adjust the mirror to your preferred viewkoki.
Atahanga 2: Whakatata view o muri view mirror's mounting mechanism, showing the bracket and securing screw area.
Video 3: Installation process for a rear view mirror with OEM part number 76400-SDA-A03, demonstrating how to attach it to the windshield mount.
3. Nga Tohutohu Whakahaere
The Honda Interior Rear View Mirror is designed for simple and effective operation.
3.1 Anti-Glare Function
Your mirror is equipped with an anti-glare switch, typically located at the bottom edge of the mirror housing. This switch allows you to adjust the mirror's reflectivity to reduce glare from headlights of vehicles behind you, especially during nighttime driving.
- Aratau Awatea: For normal daytime driving, ensure the anti-glare switch is in its default position (usually pushed away from you).
- Nighttime Mode (Anti-Glare): When driving at night and experiencing glare, pull the anti-glare switch towards you. This will tilt the mirror glass slightly, using a secondary reflective surface to reduce glare while still providing a clear view of traffic behind you.
Video 4: This video demonstrates the anti-glare switch operation, showing how to toggle between normal and anti-glare modes for improved visibility.
4. Tiaki
To ensure the longevity and optimal performance of your rear view whakaata, whai i ēnei aratohu tiaki māmā:
- Te horoi: Clean the mirror surface with a soft, lint-free cloth and a glass cleaner. Avoid abrasive cleaners or materials that could scratch the mirror.
- Tirotiro: Periodically check the mirror's mounting arm and screw for any looseness. Tighten if necessary, but do not overtighten.
- Aukati i te Paanga: Protect the mirror from direct impact, which can cause cracks or damage to the glass and housing.
5. Te Raru
If you encounter any issues with your rear view mirror, consider the following common troubleshooting steps:
- Mirror is Loose/Vibrates:
- Check the mounting screw and tighten it securely.
- Ensure the mirror is fully seated on the windshield bracket.
- He uaua ki te whakatikatika koki:
- Verify that the mounting screw is not overtightened, which can restrict movement.
- Ensure no debris is obstructing the ball joint mechanism.
- Persistent Glare:
- Confirm the anti-glare switch is correctly engaged for nighttime driving.
If problems persist, consult a certified Honda service technician.
6. Whakatakotoranga
| Āhuahira | Taipitopito |
|---|---|
| Waitohu | Honda |
| Tau tauira | 76400-SDA-A03 |
| Turanga Wāhanga Aunoa | Whakamuri |
| Rahi Tūemi (L x W x H) | 10.3 x 6.4 x 4.7 inihi |
| Rauemi | Karaihe |
| Tae | Regular (Black) |
| Momo Whakaeke | Maunga Whakapapa |
| Momo Pai | Te Waka Tauwhāiti |
| Whakaahuatanga Curvature Arotahi | Pūtōpuke |
| Taumaha Tūemi | 13.7 hekere |
7. He aha kei roto i te Pouaka
- Genuine Honda MIRROR, REARVIEW (Model: 76400-SDA-A03)
8. Pūtāhui me te Tautoko
This Genuine OEM Honda part is backed by Honda's standard warranty for automotive parts. For specific warranty details, please refer to your vehicle's owner's manual or contact an authorized Honda dealership. For technical support or further assistance, please contact your local Honda service center.
