Kupu Whakataki
This manual provides instructions for the safe and efficient operation of your Globe Electric 24512 Daily Indoor Mechanical Timer. This device is designed to automatically turn electrical appliances on and off at programmed times, helping to conserve energy and enhance convenience. Please read these instructions thoroughly before first use and retain for future reference.
Nga Korero Haumaru Nui
- Mo roto anake. Kaua e pa ki te makuku, ki te wera nui ranei.
- Do not exceed the electrical ratings of the timer. Overloading may cause overheating and fire risk.
- Me mohio kua honoa te matawā ki roto i te putanga whenua.
- Do not use with appliances that could cause dangerous conditions if left unattended, such as heating appliances or power tools.
- Always unplug the timer from the wall outlet before cleaning. Clean with a dry cloth only.
- Kaua e wetewete, kaua hoki e ngana ki te whakatika i te taima. Tukuna ngā mahi tiaki katoa ki ngā kaimahi whai tohu.
Ka mutu te huaview
The Globe Electric 24512 Mechanical Timer features a 24-hour dial with push-down pins for setting ON/OFF times and a manual override switch.
Whakaahua 1: Mua View of Timer. This image displays the timer's face, highlighting the central rotating dial marked with hours (AM/PM) and the surrounding segments with push-down pins. A slider switch labeled "OUTLET ON" and "TIMER ON" is visible at the top.
Whakaahua 2: Taha View of Timer. This image shows the timer from a side angle, revealing the standard three-prong electrical plug on the back for insertion into a wall outlet, and a two-prong outlet on the side where an appliance can be connected.
- Waea 24-Hāora: The central rotating dial is marked with hours from 1 AM to 12 PM and 1 PM to 12 AM. It rotates clockwise over a 24-hour period.
- Programmable Pins: The outer ring consists of multiple segments (pins). Each pin represents a 15-minute interval. Pushing a pin DOWN activates the connected appliance during that interval; leaving it UP deactivates it.
- Whakawhiti Whakawhiti A-ringa: Located at the top, this slider switch allows you to bypass the timer's programming.
- Whakaputa: A standard electrical outlet on the side of the timer where your appliance plugs in.
Tatūnga
- Tautuhi Wā Onāianei: Rotate the 24-hour dial clockwise until the current time aligns with the arrow indicator on the timer's face (refer to Figure 1). Ensure you distinguish between AM and PM hours.
- Ngā Wā Whakaweto/Whakakā o te Hōtaka:
- Each segment (pin) on the outer ring represents 15 minutes.
- Push DOWN all pins corresponding to the time periods you want the connected appliance to be ON.
- Leave UP all pins corresponding to the time periods you want the connected appliance to be OFF.
- Hononga taputapu: Plug the appliance you wish to control into the outlet on the side of the timer (refer to Figure 2). Ensure the appliance's power switch is in the ON position.
- Plug in Timer: Insert the timer into a standard 120V AC wall outlet.
- Tīpakohia te Aratau Mahi: Slide the manual override switch at the top to the "TIMER ON" position for automatic operation based on your programmed settings.
Nga Tohutohu Whakahaere
Once set up, the timer will automatically turn your connected appliance ON and OFF according to the programmed schedule. The dial will continuously rotate, indicating the current time.
Whakawhiti Whakawhiti A-ringa
The manual override switch provides flexibility to control the appliance independently of the timer's program:
- TAMA KI: (Default position for programmed operation) The timer will follow the ON/OFF schedule set by the pins.
- OUTLET ON: The connected appliance will remain ON continuously, bypassing the timer's program. The timer dial will continue to rotate, but the output will stay ON.
Figure 3: Timer in Use. This image shows the timer plugged into a standard wall outlet, with a desk lamp's power cord plugged into the timer's side outlet, illustrating how the device controls an appliance.
Te tiaki
- Keep the timer clean and free from dust. Use a dry, soft cloth for cleaning.
- Kaua e whakamahi i nga kai horoi wai, i nga taonga abrasive ranei.
- Whakaorangia te matawā ki te wāhi mātao, maroke ki te kore e whakamahia.
Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kāore te taputapu e tahuri/whakaweto i ngā wā kua whakaritea. |
|
|
| Appliance does not turn ON at all. |
|
|
Whakatakotoranga
Figure 4: Timer Dimensions. This image provides a visual representation of the timer's physical size, indicating its width, height, and depth measurements.
- Tauira: 24512
- Waitohu: Globe Hiko
- Momo: Daily Indoor Mechanical Timer
- Tae: Mā
- Whakauru Voltage: 120V AC, 60Hz (Standard North American)
- Minimum ON/OFF Time: meneti 15
- Taumaha Tūemi: 4.9 hekere
- Rahi Hua:
- Unit Dimensions (Approximate): 2.75 inches (W) x 2.75 inches (H) x 1.5 inches (D) (Refer to Figure 4)
- Te Rahi Taake: 7.5 x 5.25 x 7.5 inihi
- Pikohiko e hiahiatia ana: Kao
- UPC: 058219245125
Pūtāhui me te Tautoko
For warranty information or technical support, please contact Globe Electric customer service. Refer to the product packaging or the official Globe Electric webpae mo nga taipitopito whakapā o naianei.
Webpae: www.globe-electric.com
