He pukapuka tohutohu mō te rama raro kāpata waea tika a Kichler 12066SS30 LED

1. Nga Korero Haumaru Nui

Please read and understand all instructions before beginning installation. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause property damage or personal injury.

• WHAKATŪPATO: Te mate o te ru hiko. Momotuhia te hiko i te whakakorikori, i te ara iahiko ranei i mua i te whakaurunga, i te ratonga ranei.
• Me whakauru tenei hua ki runga i te waehere whakaurunga e tika ana ma te tangata e mohio ana ki te hanga me te mahi o te hua me nga aitua e pa ana.
• Use only 120V AC, 60Hz power supply.
• Do not install in wet locations. Suitable for dry locations only.
• Me whakarite kia mau nga hononga hiko katoa me te u ki nga tikanga me nga tikanga o te rohe.
• Do not modify the fixture or attempt to repair integrated LED components.

2. Ihirangi mokete

Manatokona kei te noho nga waahanga katoa i mua i te tiimata o te whakaurunga:

• LED Undercabinet Light Fixture (1)
• Whakaeke Tiu (2)
• Kaitono Waea (3)
• Tohutohu Tāuta (Tenei tuhinga)

Whakaahua 1: Kichler 12066SS30 LED Direct Wire Undercabinet Light. This image displays the stainless steel fixture with its integrated LED light source and rocker switch.

3. Tohutohu Tāuta

3.1 Tuhinga o mua

1. Whakawetohia te hiko: Locate the circuit breaker or fuse box and turn off the power to the area where the light will be installed. Verify power is off using a voltage Kaiwhakamatautau.
2. Whakatauhia te waahi whakairi: Choose a suitable location under a cabinet, ensuring it is a dry indoor environment.

3.2 Te Whakapiki i te Whakanoho

1. Position the fixture against the desired mounting surface.
2. Mark the locations for the mounting screws.
3. Tuhia nga rua pairati mehemea e tika ana.
4. Secure the fixture to the surface using the provided mounting screws. Ensure the fixture is firmly attached.

3.3 Electrical Wiring (Direct Wire)

This fixture is designed for direct wiring to a 120V AC power source.

1. Carefully remove the wiring compartment cover on the fixture.
2. Connect the incoming pango (hot) wire from the power supply to the pango wire of the fixture using a wire connector.
3. Connect the incoming ma (neutral) wire from the power supply to the ma wire of the fixture using a wire connector.
4. Connect the incoming kākāriki or bare copper (ground) wire from the power supply to the kākāriki or bare copper wire of the fixture using a wire connector.
5. Ensure all connections are tight and secure. Tuck wires neatly into the wiring compartment and replace the cover.

3.4 Inter-Connectable Feature

This fixture can be inter-connected with other compatible Kichler undercabinet lights for custom runs. Refer to the specific instructions provided with Kichler inter-connectable accessories for proper connection methods.

4. Nga Tohutohu Whakahaere

The Kichler 12066SS30 LED Undercabinet Light features an integrated On/Off rocker switch for easy operation.

• Hei huri i te rama ON, press the rocker switch to the 'ON' position.
• Hei huri i te rama WATE, press the rocker switch to the 'OFF' position.

5. Tiaki

The Kichler 12066SS30 LED Undercabinet Light requires minimal maintenance.

• Te horoi: Me mohio kua weto te hiko i mua i te horoi. Horoia te taputapu ki te ngohengohe, maroke, paku ranei damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or LED components.
• Huihuinga: The LED light source is integrated and designed for long-term use. It is not user-replaceable.

6. Te Raru

If the light fixture does not operate correctly, refer to the following troubleshooting guide:

If you are unable to resolve the issue, contact Kichler customer support or a qualified electrician.

7. Whakatakotoranga

• Tauira: 12066SS30
• Waitohu: Kichler
• Ahu: 12.75"L x 4"W x 1"H
• Taumaha Tūemi: 1.52 pauna
• Mutu: Kowiri tira
• Momo Puna Maama: LED whakauru
• Paemahana Tae: 3000 Kelvin (Ma mahana)
• Wattage: 5 watts
• Tirohanga: 225.60 rama
• Te kaha: 40 rama mo ia watt
• Voltage: 120 Volts
• Momo Tāuta: Surface Mount, Direct Wire or Inter-connectable
• Tikanga Mana: Whakawhiti Rocker On/Weto
• Whakamahinga o roto/waho: Indoor use only (Dry locations)

8. Pūtāhui me te Tautoko

For warranty information or technical support, please contact Kichler customer service. Details regarding specific warranty terms and conditions are typically provided with the product packaging or can be found on the official Kichler webpae.

Kichler Webpae: www.kichler.com