Kupu Whakataki
This manual provides instructions for the safe and proper installation and use of your Flexson FLXP1WB2021 Wall Bracket, designed specifically for Sonos Play:1 speakers. Please read this manual thoroughly before installation and retain it for future reference.
Nga korero haumaru
WHAKATŪPATO:
Improper installation can lead to equipment damage or personal injury. If you are unsure about the installation process, consult a qualified professional.
- Ensure the wall material is suitable for supporting the weight of the bracket and speaker.
- Use appropriate wall mounting hardware (screws and anchors) for your specific wall type. Wall mounting hardware is not included with this product.
- Do not exceed the maximum weight capacity of the bracket. This bracket is designed for Sonos Play:1 speakers only.
- Tiakina nga waahanga iti mai i nga tamariki.
Ihirangi mokete
Manatokona kei te noho nga waahanga katoa i mua i te tiimata o te whakaurunga:
- 2 x Flexson Wall Brackets (FLXP1WB2021)
- Pukapuka Kaiwhakamahi (tenei tuhinga)
Tuhipoka: Sonos Play:1 speakers and wall mounting hardware (screws, anchors) are not included.
Tatūnga me te Tāuta
Follow these steps to install your Flexson wall bracket:
- Whakapaia te Tauwāhi Whakapuru: Choose a suitable wall location, ensuring it can support the weight of the speaker and bracket. Mark the desired drilling points for the wall bracket.
- Drill Pilot rua: Using an appropriate drill bit for your wall type and chosen mounting hardware, drill pilot holes at the marked locations.
- Tāpirihia te Taupoki Pakitara: Securely fasten the wall bracket to the wall using suitable screws and wall anchors (not supplied). Ensure the bracket is level and firmly attached.
- Tāpirihia te Kaikōrero ki te Pūmau: The Flexson bracket features a unique 2-piece design for easy assembly. Align your Sonos Play:1 speaker with the bracket's mounting points. The bracket allows for neat cable routing.
- Kaikōrero Haumaru: Use the provided screw to secure the Sonos Play:1 speaker to the bracket. Ensure it is tightened sufficiently to hold the speaker firmly.
- Whakaha Uepu: Route the speaker's power cable neatly through the designated channels on the bracket to maintain a clean appearance.
Figure 1: Flexson FLXP1WB2021 Wall Brackets. These brackets are designed to securely hold Sonos Play:1 speakers.
Figure 2: Dimensional drawing of the Flexson wall bracket, illustrating various measurements for installation planning.
Te Whakahaere me te Whakarerekētanga
Once installed, the Flexson wall bracket offers flexible positioning for your Sonos Play:1 speaker:
- Konga: The bracket allows for a 15° downward tilt, enabling you to direct sound towards your listening area.
- Hurihuri: You can swivel the speaker 40° left and 40° right to optimize sound dispersion.
- Whakapuru Hurihuri: The bracket supports mounting the speaker upside down. This feature allows easier access to the speaker's on-device controls when mounted higher on a wall.
Te tiaki
To maintain the appearance and functionality of your Flexson wall bracket:
- Clean the bracket with a soft, dry cloth.
- Kaua e whakamahi i ngā kaihoroi whakakoi, i ngā whakarewa rānei, nā te mea ka kino pea te āhua o te peita.
- Periodically check all mounting screws to ensure they remain tight and secure.
Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Speaker feels unstable or loose. | Mounting screws are not tight enough, or incorrect wall anchors were used. | Ensure all wall mounting screws and the speaker attachment screw are securely tightened. Verify that appropriate wall anchors were used for your wall type. |
| Difficulty adjusting tilt or swivel. | Mechanism may be stiff or overtightened. | Apply gentle force. Do not force adjustments if resistance is excessive. Check for any obstructions. |
Whakatakotoranga
- Tau tauira: FLXP1WB2021
- Hototahi: Sonos Play:1 Speakers
- Rauemi: Te maitai
- Tae: Pango
- Whakaritea Tita: 15° downwards
- Whakatikatika hurihuri: 40° maui, 40° matau
- Rahi Hua: 5.47 x 3.62 x 1.77 inihi (139 x 92 x 45 mm)
- Taumaha Tūemi: 7 hekere (198 karamu)
- Kaihanga: FLEXSON
Pūtāhui me te Tautoko
For warranty information and technical support, please refer to the official Flexson webpae, whakapā atu ranei ki to kaihoko. Puritia to tohu hoko mo nga kereme whakamana.
