Kupu Whakataki
The TC Electronic T2 Reverb effects pedal provides a diverse range of reverb effects for guitar and other instruments. This manual details the pedal's features, setup procedures, operational guidelines, maintenance tips, troubleshooting steps, and technical specifications to ensure optimal performance.
Ka mutu te huaview
The T2 Reverb pedal features intuitive controls for shaping your sound and a robust design for reliable use. Familiarize yourself with the pedal's components:
- KUPU PURU: Whakahaerehia ai te roa o te hiku o te reverb.
- KUPU TONE: Adjusts the brightness or darkness of the reverb.
- KUPU WHAKANUI: Balances the ratio between the dry (unaffected) signal and the wet (effected) signal.
- Kōwhiringa Momo Whakatangitangi: A rotary switch to select from various reverb algorithms (I-VIII, E1, E2, TP).
- Takawaenga: Ka uru, ka hipa ranei i te paanga.
- Jacks Whakauru / Putanga: For connecting your instrument and ampkaikawe
- Whakauru Hiko: For connecting a 9V DC power supply.
Tatūnga
- Hononga Hiko: Connect a 9V DC power adapter (center negative, not included) to the power input jack. Alternatively, the pedal can be powered by a 9V battery (not included) by opening the battery compartment.
- Hononga Taputapu: Connect your instrument (e.g., guitar) to the input jack on the right side of the pedal using a standard 1/4-inch instrument cable.
- Amphononga hono: Tūhonohia te kōti whakaputa i te taha maui o te hikoi ki a koe amplifier's input using a standard 1/4-inch instrument cable.
- Stereo Operation (Optional): For stereo output, connect the second output jack to a second amppūrere tāuru reo irirangi, pūrere tāuru orooro rānei.
Me whakarite kia mau nga hononga katoa i mua i te whakakaha i to hikoi amplifier and pedal.
Nga Tohutohu Whakahaere
Mahi Taketake
- Whakahiko: Once connected, press the footswitch to engage the effect. The LED indicator will illuminate. Press again to bypass the effect.
- Selecting Reverb Type: Rotate the Reverb Type Selector knob to choose from the available reverb algorithms (I through VIII, E1, E2). Each setting offers a distinct reverb character.
- Adjusting Reverb Parameters:
- Whakamahia te POROHA knob to control the duration of the reverb.
- Whakamahia te TONE knob to adjust the frequency content of the reverb, making it brighter or darker.
- Whakamahia te WHAKANUI knob to blend the dry signal with the reverb effect. A higher setting increases the effect's prominence.
TonePrint Feature
The "TP" setting on the Reverb Type Selector activates the TonePrint feature. TonePrint allows you to upload custom-tuned reverb sounds created by artists or design your own using the TC Electronic TonePrint app. Connect your pedal to a computer via USB (cable not included) or beam TonePrints wirelessly from your smartphone to the pedal's pickup.
Te tiaki
- Te horoi: Whakamahia he kakahu ngohengohe, maroke hei horoi i waho o te hikoi. A ape i te kai horoi, te whakarewa ranei.
- Whakakapinga Pūhiko: If using battery power, replace the 9V battery when the LED indicator dims or the effect performance degrades. To replace, open the battery compartment on the underside of the pedal.
- Rokiroki: Store the pedal in a dry environment, away from extreme temperatures and direct sunlight, when not in use. Disconnect power and remove the battery if storing for extended periods.
Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kaore he tangi, he tohu ngoikore ranei | Incorrect cable connections, dead battery, faulty power supply, volume knobs on instrument/amp tahuri iho. | Check all cable connections. Replace battery or verify power supply. Ensure instrument and amplifier volumes are set appropriately. |
| Haruru, hamumu ranei | Ground loop, faulty cables, interference from other electronics, improper power supply. | Use shielded cables. Try a different power outlet or isolated power supply. Move pedal away from other electronic devices. |
| Effect not engaging (LED off) | No power, faulty footswitch. | Verify power connection and battery status. If problem persists, contact support. |
| TonePrint not loading | Incorrect app usage, connection issues. | Ensure the TonePrint app is updated and the pedal is correctly connected (USB or beaming). Refer to the TonePrint app's instructions for detailed guidance. |
Whakatakotoranga
- Tauira: T2
- Taumaha Tūemi: 1 pauna (tata ki te 454 karamu)
- Rahi Hua: 4.61 x 2.48 x 2.91 inihi (11.7 x 6.3 x 7.4 cm)
- Puna Hiko: 9V DC (center negative) power adapter or 9V battery
- Voltage: 9 Volts
- Hōputu Tohu: Tauritenga
- Atanga Pūmārō: HP-HSC
Pūtāhui me te Tautoko
TC Electronic products are covered by a limited warranty. For detailed warranty information, product support, or service inquiries, please visit the official TC Electronic webpaetukutuku, whakapā atu ranei ki ta raatau tautoko kaihoko. Puritia to tohu hoko mo nga kereme whakamana.
Whaimana Webpae: www.tcelectronic.com
