Kupu Whakataki
This manual provides comprehensive instructions for the installation, operation, and maintenance of your VEMER THALOS KEY Wall Thermostat, Model VE720900. Please read this manual carefully before installation and use to ensure proper function and safety.
Whakaahua 1: Mua view of the VEMER THALOS KEY Wall Thermostat, displaying a temperature of 23.5 degrees Celsius on its blue backlit LCD screen.
The VEMER THALOS KEY is a wall-mounted thermostat featuring an LCD screen and powered by mains electricity (230V). It is equipped with two physical buttons for intuitive control and a blue backlit display for clear readability. A keypad lock function, secured by a password, is included to prevent unauthorized changes to settings, making it suitable for various environments, including public spaces.
Figure 2: The VEMER THALOS KEY Thermostat seamlessly integrated into a modern living room environment, showcasing tona hoahoa kiko.
Tatūnga
1. Te Wetewete me te Tirotiro
Carefully remove the thermostat from its packaging. Inspect the device for any signs of damage. The package should contain the VEMER THALOS KEY thermostat and this instruction manual. If any components are missing or damaged, contact your supplier immediately.
2. Te Whakaeke i te Thermostat
The thermostat is designed for wall mounting. Choose a suitable location away from direct sunlight, drafts, or heat sources that could affect temperature readings. The recommended mounting height is approximately 1.5 meters (5 feet) from the floor.
Figure 3: Dimensional diagram of the Thalos Key 230 thermostat, including front view, taha view, and a basic wiring schematic, with measurements in millimeters.
Use the provided mounting screws to secure the thermostat base to the wall. Ensure the base is level before tightening the screws.
Figure 4: Illustration demonstrating the correct method for attaching the thermostat's backplate to the wall using two screws.
3. Waea Hiko
WARNING: Electrical installation should only be performed by a qualified electrician. Disconnect power at the main circuit breaker before beginning any wiring work.
The VEMER THALOS KEY thermostat operates on a 230V mains power supply. Connect the electrical cables to the appropriate terminals on the thermostat's backplate as indicated in the wiring diagram below. Ensure all connections are secure and correctly insulated.
Figure 5: Wiring diagram illustrating the terminal connections for the thermostat, including power input and output to the heating/cooling system.
After wiring, carefully attach the thermostat front panel to the mounted base, ensuring it clicks securely into place.
Nga Tohutohu Whakahaere
1. Kei te Hiko Nei
Once wired and mounted, restore power to the thermostat from the main circuit breaker. The LCD display will illuminate, indicating the thermostat is operational.
2. Whakaatu me nga Patene
The thermostat features a clear LCD display with a blue backlight and two physical buttons (up and down arrows) for setting adjustments.
Figure 6: The thermostat's LCD display with its characteristic blue backlight, enhancing visibility.
Figure 7: The thermostat's LCD display with an alternative red backlight, indicating a different operational state or setting.
3. Te Tautuhinga i te Pawera
Whakamahia ki runga (▲) ka heke (▼) arrow buttons to adjust the desired temperature. The display will show the set temperature, and the thermostat will automatically regulate the heating or cooling system to maintain this temperature.
4. Operating Modes (On/Off or Proportional, Summer/Winter)
The thermostat supports both On/Off and Proportional control modes, as well as Summer and Winter modes. Refer to the detailed programming section in the full product manual (if available) for instructions on how to switch between these modes and configure their parameters. Typically, a long press or combination of button presses will access mode settings.
5. Keypad Lock Function
To prevent unauthorized changes, the thermostat features a keypad lock function. This can be activated with a password. Consult the full product manual for instructions on how to set and activate/deactivate the keypad lock.
Figure 8: Icons representing key features: Keypad Lock, Display Control, Power Supply, and Cooling/Winter Mode.
Te tiaki
The VEMER THALOS KEY thermostat requires minimal maintenance. Follow these guidelines to ensure its longevity and optimal performance:
- Te horoi: Gently wipe the thermostat's surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the display or casing.
- Aukati i nga arai: Ensure that no objects block the thermostat's vents or sensors, as this can lead to inaccurate temperature readings.
- Hurihuri Hiko: If the thermostat is unresponsive, try cycling the power by turning off the circuit breaker for a few minutes and then turning it back on.
Raparongoā
If you encounter issues with your VEMER THALOS KEY thermostat, refer to the following common problems and solutions:
| Raruraru | Take pea | Rongoā |
|---|---|---|
| He waatea te whakaaturanga | No power supply; loose wiring. | Check circuit breaker. Ensure wiring connections are secure (consult a qualified electrician if unsure). |
| Thermostat not controlling heating/cooling | Incorrect mode selected; wiring issue; system malfunction. | Verify the thermostat is in the correct operating mode (e.g., heating/cooling). Check wiring. Consult an HVAC technician if the system itself is not responding. |
| Ko te ahua o te panui i te pāmahana he he | Te waahi whakamaarama ka pa ki nga tauira, te ra tika, te puna wera ranei. | Relocate the thermostat if possible. Ensure no obstructions are near the sensor. |
| Kua raka te papakupu | Keypad lock function is active. | Enter the password to unlock the keypad. Refer to the full manual for password reset procedures if forgotten. |
If the problem persists after attempting these solutions, please contact VEMER customer support or a certified technician.
Whakatakotoranga
Below are the technical specifications for the VEMER THALOS KEY Wall Thermostat (Model VE720900):
| Āhuahira | Whakatakotoranga |
|---|---|
| Waitohu | VEMER |
| Ingoa Tauira | THALOS KEY |
| Tau tauira | VE720900 |
| Tae | Mā |
| Rahi Hua (L x W x H) | 12.5 x 2.6 x 8.5 cm |
| Taumaha Tūemi | 190 karamu |
| Voltage | 230 Volts |
| Puna Mana | Taura Hiko |
| Momo Whakaatu | LCD (with blue backlight) |
| Momo Mana | Manual, Touch Control |
| Momo Mana Pawera | On/Off or Proportional |
| Nga Waenga kei roto | Thermostat |
| Whenua Taketake | Itari |
| Nga waahanga e waatea ana | Kaore i te waatea nga korero |
Figure 9: Indication that the product is manufactured in Italy.
Pūtāhui me te Tautoko
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. VEMER products are designed for reliability and performance. For technical support or service inquiries, please visit the official VEMER webpaetukutuku, whakapā atu ranei ki ta raatau tari ratonga kaihoko. Puritia to riirii hoko hei tohu mo te hoko mo nga kereme whakamana.
