Kupu Whakataki
This manual provides essential instructions for the setup, operation, and maintenance of your Datalogic Heron HD3130-BK 1D Barcode Scanner. Please read this manual thoroughly before using the device to ensure proper functionality and longevity.
Ihirangi mokete
- Datalogic Heron HD3130-BK 1D Barcode Scanner
- Turanga Matawai
- (USB) Connection Cable (sold separately or included depending on package)
- Tuhinga (tenei pukapuka)
Note: The connection cable is required for operation and may be sold separately.
Tatūnga
Follow these steps to set up your Datalogic Heron HD3130-BK barcode scanner:
- Wewetehia te Matawai: Carefully remove the scanner and its stand from the packaging.
- Huihuia te Tu: If the stand is not pre-assembled, attach the scanner to the stand base according to the visual guide below. Ensure it is securely fastened.
- Honoa te Taura: Insert one end of the USB connection cable into the port at the base of the scanner. Connect the other end of the USB cable to an available USB port on your computer (desktop or laptop).
- Whakahiko: The scanner is powered via the USB connection. Once connected, it should power on automatically.
- Tāuta Atekōkiri (mehemea e tika ana): In most cases, the scanner will be recognized as a standard HID keyboard device and will not require specific driver installation. If prompted, follow your operating system's instructions for new hardware detection.
This image displays the Datalogic Heron HD3130-BK 1D Barcode Scanner in black, positioned on its included stand. The scanner features a sleek, ergonomic design, suitable for both handheld and presentation scanning.
Nga Tohutohu Whakahaere
The Datalogic Heron HD3130-BK is designed for efficient 1D barcode scanning. It supports both handheld and presentation modes.
Matawai-a-ringa
- Pick Up the Scanner: Remove the scanner from its stand.
- Whāinga me te Matawai: Point the scanner's window at the 1D barcode you wish to read. Ensure the red aiming line covers the entire barcode.
- Whakaū Matawai: A successful scan is typically indicated by an audible beep and/or a visual confirmation (e.g., a green light). The scanned data will be transmitted to your connected computer as keyboard input.
Presentation Scanning (using the stand)
- Tūemi Wāhi: Position the barcode of the item in front of the scanner's window while it is in its stand.
- Rapu Aunoa: The scanner will automatically detect and read the barcode when it is presented correctly within its field of view.
- Whakaū Matawai: A successful scan is indicated by an audible beep and/or visual confirmation.
The scanner is capable of processing approximately 270 scans per second, ensuring quick and efficient data capture.
Te tiaki
Mā te tiaki tika ka roa te ora me te mahi tino pai o tō matawai.
- Te horoi: Whakamahia he kakahu ngohengohe, karekau he ngongo paku dampened with water or a mild, non-abrasive cleaner to wipe the scanner's exterior and scan window. Do not use harsh chemicals or abrasive materials.
- Rokiroki: Ki te kore e whakamahia, penapenahia te matawai ki tetahi taiao ma, maroke, kia matara atu i te ra tika me te wera nui.
- Tiaki taura: Avoid bending or twisting the USB cable excessively. Ensure it is not pinched or placed under heavy objects.
Raparongoā
If you encounter issues with your Datalogic Heron HD3130-BK scanner, refer to the following common problems and solutions:
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Karekau te Matawai i te hiko. | Ko te taura USB kaore i te hono, i te he ranei. | Ensure the USB cable is securely connected to both the scanner and the computer. Try a different USB port or cable. |
| Karekau a Scanner e panui i nga tohupaepae. | Barcode damaged, incorrect aiming, or scanner settings. | Ensure the barcode is clean and undamaged. Aim the red line directly across the barcode. Check if the scanner is configured for the specific barcode symbology (e.g., UPC-A, Code 39). |
| Kāore i te tika te putanga mai o ngā raraunga kua matawaihia. | Keyboard layout mismatch or scanner configuration. | Verify your computer's keyboard layout matches the scanner's configured output. Refer to the full product manual for advanced configuration options. |
| Ka tangi te matawai engari kāore he raraunga e tukuna ana. | Ko te tono kaore i te arotahi, i te aratau atanga hē ranei. | Ensure the cursor is in the desired input field of your application. Confirm the scanner is operating in HID keyboard emulation mode. |
For more detailed troubleshooting or advanced configuration, please refer to the comprehensive Datalogic Heron HD3130 product manual available on the official Datalogic webpae.
Whakatakotoranga
| Āhuahira | Taipitopito |
|---|---|
| Tau tauira | HD3130-BK |
| Momo Matawai | Kaituhi Barcode 1D |
| Reiti Matawai | 270 karapa/hekona |
| Hangarau Hononga | Tauira USB |
| Puna Mana | Hiko Waea (ma te USB) |
| Pūrere Hototahi | Papamahi, Pona |
| Taumaha Tūemi | 1.28 pauna (tata ki te 0.58 kg) |
| Hunga Hua | 7.5 x 8.8 x 4.1 inihi (tata ki te 19.05 x 22.35 x 10.41 cm) |
| Kaihanga | Raraunga Raraunga |
| Tau Tauhokohoko Ao (GTIN) | 05054629213858 |
Pūtāhui me te Tautoko
Datalogic products are designed for reliability and performance. For information regarding product warranty, please refer to the warranty statement included with your purchase or visit the official Datalogic webpae.
For technical support, service, or to inquire about additional accessories, please contact Datalogic customer support through their official channels. You may need your product model number (HD3130-BK) and serial number (if applicable) when contacting support.
Rauemi ipurangi: For the most up-to-date documentation, drivers, and software, please visit the Āpiha Datalogic Webpae.
