InFocus IN112a SVGA DLP Projector User Manual

1. Kupu Whakataki

This manual provides essential information for the safe and efficient operation of your InFocus IN112a SVGA DLP Projector. Please read it thoroughly before using the projector and retain it for future reference. The InFocus IN112a is designed to deliver clear and bright projections for various applications, featuring SVGA resolution, HDMI connectivity, and 3D support.

2. Nga korero haumaru

Kia mau ki ngā mahi ārai haumaru e whai ake nei hei ārai i te pakaru o te pūwhakaata, hei whakarite hoki i te haumaru o te kaiwhakamahi:

• Do not look directly into the projector lens ina te lamp kei runga. Ko te kaha o te marama ka pa te kino o te kanohi.
• Me whakarite kia tika te hau. Kaua e araia nga whakatuwheratanga hau.
• Only qualified service personnel should open the projector casing. Kaore he waahanga e taea ana e te kaiwhakamahi ki roto.
• Whakamahia anake te taura hiko e whakaratohia ana me te kaupapa.
• Puritia te pūwhiti mai i te wai, i te taiao makuku ranei.
• Ko te pūwhiti lamp contains mercury. Dispose of lamps according to local regulations. Visit riteamphangarua.org mo etahi atu korero.

Whakaahua: Raro view of the InFocus IN112a projector, displaying various warning labels, regulatory compliance marks (like CE, FCC), and information regarding the mercury content in the lamp me nga tohutohu hangarua.

3. Hua Neke Atuview

3.1. Projector Dimensions

Whakaahua: Mua view of the InFocus IN112a projector, illustrating its physical dimensions. The projector measures approximately 292 mm in width, 220 mm in depth, and 108 mm in height.

3.2. Ngā Mana Whakahaere o te Paewhiri Runga

Whakaahua: Runga view of the InFocus IN112a projector, highlighting the control panel. This panel includes buttons for power, menu access, source selection, and directional navigation for menu adjustments.

The top panel features buttons for power on/off, menu access, input source selection, and navigation arrows for adjusting settings within the on-screen display (OSD) menu. The focus and zoom rings are located near the lens.

3.3. Hononga Paewhiri Whakamuri

Whakaahua: Rear view of the InFocus IN112a projector, displaying its comprehensive array of connectivity ports. These include HDMI 1.4, two VGA inputs (Computer 1, Computer 2), a VGA monitor output, S-Video, Composite video, two 3.5mm stereo audio inputs, one 3.5mm stereo audio output, an RS232C control port, and a USB-B port.

The rear panel provides a variety of connection options:

• Atanga 1.4: Mō te tāuru ataata mamati me te tāuru oro.
• VGA (Computer 1, Computer 2): Two inputs for analog computer signals.
• VGA Monitor Out: For connecting an external monitor.
• Ataata Hiato: For standard definition video input.
• S-Ataata: For enhanced standard definition video input.
• Audio In (3.5mm x 2): For stereo audio input.
• Ororongo Atu (3.5mm): For stereo audio output to external speakers.
• RS232C: For projector control via a computer or control system.
• USB-B: Mo te ratonga, mo nga whakahou firmware ranei.

4. Tatūnga

4.1. Whakanoho

Position the projector on a stable, flat surface or mount it securely to a ceiling. Ensure there is adequate space around the projector for ventilation. The distance from the screen will determine the image size. Refer to the specifications section for throw ratio details.

4.2. Te Mana Hononga

Connect the supplied power cord to the projector's power inlet and then to a grounded electrical outlet. The power LED will illuminate, indicating standby mode.

4.3. Te Hono i ngā Pūtake Ataata

Connect your video source (e.g., computer, Blu-ray player, cable box) to the appropriate input port on the projector's rear panel using a compatible cable. For best quality, use the HDMI input.

• HDMI: Connect an HDMI cable from your source to the projector's HDMI port.
• VGA: Connect a VGA cable from your computer to either the Computer 1 or Computer 2 port.
• Composite/S-Video: Connect the respective cable for older video sources.

4.4. Hononga Ororongo

If using VGA, Composite, or S-Video inputs, connect an audio cable from your source's audio output to one of the projector's 3.5mm Audio In ports. HDMI carries both video and audio, so a separate audio connection is not typically needed for HDMI sources.

4.5. Te Whakarite Arotahi me te Topa

After powering on the projector and displaying an image, rotate the Ringa arotahi around the lens until the image is sharp and clear. Use the Topa mowhiti to adjust the image size to fit your screen.

5. Mahi

5.1. Te Whakakaha/Weto

• Hei Whakahiko: Press the Power button on the projector's top panel or the remote control. The power indicator will turn green.
• Hei Whakaweto: Press the Power button twice. The projector will enter a cooling cycle, and the power indicator will turn red (standby) once complete.

5.2. Te whiriwhiri i te Puna Whakauru

Press the "Source" button on the projector or remote control repeatedly to cycle through available input sources (HDMI, VGA1, VGA2, S-Video, Video). The projector will automatically detect an active signal if "Auto Source" is enabled in the menu.

5.3. Tahua Whakaterenga

Press the "Menu" button to access the On-Screen Display (OSD) menu. Use the directional arrows to navigate through menu options and the "Enter" button to select. Press "Menu" again to exit.

5.4. 3D Content Playback

The IN112a supports 3D content from Blu-ray players, cable boxes, dish services (over HDMI), and PC-based 3D content at 120Hz. To view 3D content, you will need 144 Hz DLP Link 3D glasses (sold separately).

1. Ensure your 3D source is connected via HDMI.
2. Play 3D content from your source.
3. Turn on your 144 Hz DLP Link 3D glasses. The projector should automatically detect the 3D signal.

6. Tiaki

6.1. Cleaning the Projector Lens

Gently wipe the lens with a soft, lint-free cloth specifically designed for optical surfaces. Do not use abrasive cleaners or excessive force, as this can scratch the lens.

6.2. Lamp Whakakapinga

Ko te pūwhiti lamp has a lifespan of up to 10,000 hours. When the lamp kua tata te mutunga o te ora, tera pea ka puta he karere whakatūpato, ka puta rānei teamp indicator LED may illuminate. Refer to the full service manual for detailed lamp tohutohu whakakapi. Whakatupato: Ko te lamp kei roto te mercury. Makahia te lamps according to local environmental regulations.

6.3. Te Horoi i ngā Tātari Hau

Regularly clean the air filters to ensure proper ventilation and prevent overheating. Dust and debris can accumulate, reducing cooling efficiency. Gently remove the filter cover and clean the filter with a soft brush or vacuum cleaner. Replace the filter cover securely.

7. Te Raru

8. Whakatakotoranga

9. Pūtāhui me te Tautoko

For warranty information and technical support, please refer to the documentation included with your purchase or visit the official InFocus webpae. Puritia to tohu hoko mo nga kereme whakamana.