1. Kupu Whakataki
This manual provides essential information for the proper installation, operation, and maintenance of your Datalogic QuickScan Lite QW2100 Bar Code Reader. The QW2100 is an entry-level linear imager designed for reading long, truncated 1D bar codes, commonly found in retail, light industrial, document processing, and office environments. Its ergonomic design ensures user comfort during daily operations.
Please read this manual thoroughly before using the device to ensure safe and efficient operation.
2. Nga korero haumaru
Kia mau ki nga whakaritenga haumaru e whai ake nei hei aukati i te whara me te kino o te taputapu:
- Kaua e tukuna te taputapu ki te wera nui, te makuku, te ra tika ranei.
- A ape i te tuku i te taputapu, te tuku ranei ki nga paanga kino.
- Kaua e ngana ki te whakatuwhera, ki te whakarereke ranei i te taputapu. Tukuna atu nga ratonga katoa ki nga kaimahi whai tohu.
- Kia ma te matapihi matawai kia tino pai ai te mahi.
- Use only Datalogic-approved accessories and power supplies.
3. Ihirangi mokete
Manatokona kei roto katoa nga mea kei roto i te kete:
- Datalogic QuickScan Lite QW2100 Bar Code Reader
- USB Cable (if USB interface model) or RS-232/Keyboard Wedge Cable
- Quick Start Guide (refer to this manual for full instructions)
- Optional: Stand (if purchased as a kit)
4. Hua Neke Atuview
The Datalogic QuickScan Lite QW2100 features a compact and ergonomic design for comfortable handheld use. Key components include:
- Matawai Matawai: Emits the scan line and reads bar codes.
- Pātene Keu: Ka whakahohe i te tukanga matawai.
- Tohu LED: Provides feedback on scanning status (e.g., successful read, error).
- Cable Connector Port: For connecting the interface cable.
5. Tatūnga
Follow these steps to set up your QW2100 Bar Code Reader:
- Honoa te Taura: Insert the appropriate interface cable (USB or RS-232/Keyboard Wedge) into the connector port at the base of the scanner. Ensure a secure connection.
- Tūhono ki te Pūrere Kaihautū:
- Atanga USB: Plug the USB connector into an available USB port on your computer or POS system. The operating system should automatically detect and install the necessary drivers.
- RS-232/Keyboard Wedge Interface: Connect the cable to the corresponding port on your host device. Configuration may be required using Datalogic Aladdin software or by scanning configuration bar codes (refer to the full programming manual for details).
- Whakahiko: The scanner typically powers on automatically once connected to the host device. The indicator LED may illuminate to confirm power.
- Optional Stand Setup: If using the optional stand, assemble it according to its instructions and place the scanner in the stand for hands-free operation.
For advanced configuration, such as changing symbologies or interface settings, refer to the Datalogic Aladdin Configuration Software or the comprehensive programming manual.
6. Nga Tohutohu Whakahaere
To scan a bar code with your QW2100 reader:
- Whāinga: Point the scanning window of the reader at the bar code you wish to scan.
- Whakahohe: Press and hold the trigger button. A bright scan line will project from the scanning window.
- Matawai: Position the scan line across the entire bar code. The QW2100 is designed for wide-angle scanning, making it effective for long or wide codes.
- Whakaū: Upon a successful read, the scanner will emit an audible beep (if enabled) and the indicator LED will flash. Release the trigger button.
For optimal performance, ensure the bar code is clean and not excessively creased or damaged. Adjust the distance between the scanner and the bar code for the best read.
7. Tiaki
Proper maintenance ensures the longevity and performance of your bar code reader:
- Te horoi i te Matapihi Matawai: Whakamahia he kakahu ngohengohe, kore karekau dampened with a mild, non-abrasive cleaner (e.g., glass cleaner) to gently wipe the scanning window. Avoid harsh chemicals or abrasive materials that could scratch the surface.
- Te horoi i te Casing: Horoia te waho casing me te ngohengohe, damp kakahu.
- Tirohanga taura: Regularly check the interface cable for any signs of damage, fraying, or loose connections. Replace damaged cables immediately.
- Rokiroki: Ki te kore e whakamahia, rongoatia te matawai ki tētahi wāhi ma, maroke, kia matara atu i te rā tika me te pāmahana tino kino.
8. Te Raru
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Karekau te Matawai i te hiko. | Cable not connected properly or host device not providing power. | Ensure the cable is securely connected to both the scanner and the host device. Try a different USB port or host device. |
| Scanner does not read bar codes. |
|
|
| Scanner reads intermittently. | Damaged cable or loose connection. | Check the cable for damage and ensure connections are secure. Replace cable if necessary. |
9. Whakatakotoranga
| Āhuahira | Taipitopito |
|---|---|
| Tau tauira | QW2120-BK |
| Waitohu | Raraunga Raraunga |
| Hangarau Hononga | USB Cable (also available in RS-232/Keyboard Wedge) |
| Puna Mana | AC (via host device USB or external power supply for RS-232) |
| Reiti Matawai | 400 karapa/hekona |
| Rahi Hua (L x W x H) | 6.69 x 2.56 x 2.76 inihi (17 x 6.5 x 7 cm) |
| Taumaha Tūemi | 4.2 hekere |
| Tae | Pango |
| Nga Tohu Tautoko | Most standard 1D bar codes (e.g., EAN/UPC, Code 39, Code 128, Interleaved 2 of 5, etc.) |
10. Pūtāhui me te Tautoko
Datalogic products are designed and manufactured to the highest quality standards. For warranty information, please refer to the warranty card included with your product or visit the official Datalogic webpae.
For technical support, product registration, or to download the latest drivers and software (such as Datalogic Aladdin Configuration Software), please visit the Datalogic support portal or contact your local Datalogic representative.
Webpae: www.datalogic.com
