Rigol DS1054Z Digital Oscilloscope User Manual

Kupu Whakataki

Welcome to the user manual for the Rigol DS1054Z Digital Oscilloscope. This document provides essential information for the safe and effective use of your new instrument. The DS1054Z is a versatile 4-channel, 50 MHz digital oscilloscope designed for precise waveform analysis and measurement in various electronic applications.

Nga korero haumaru

Please read all safety instructions carefully before operating the device to prevent injury or damage to the instrument.

• Puna Hiko: Ensure the oscilloscope is connected to a power source with the correct voltage and frequency as specified on the device.
• Whakapapa: Always use a properly grounded power cord to prevent electric shock.
• Whakahau: Do not block ventilation openings. Ensure adequate airflow around the instrument to prevent overheating.
• Taiao: Operate the oscilloscope in a dry, clean environment, away from direct sunlight, high temperatures, humidity, and strong electromagnetic fields.
• Puranga Wai: Avoid exposing the instrument to liquids. If liquid enters the device, disconnect power immediately and have it inspected by qualified service personnel.
• Ratonga: Refer all servicing to qualified service personnel. Do not attempt to open or repair the instrument yourself.

Ihirangi mokete

Manatokohia ko nga mea katoa kei raro nei kei roto i to kete:

• Rigol DS1054Z Digital Oscilloscope
• 4 x Passive Probes (RP2200)
• Waea hiko
• Tauira USB
• Tiwhikete Whakatau
• Quick Guide (Printed)

Image: Rigol DS1054Z Oscilloscope with its standard accessories, including four probes, power cord, and documentation.

Ka mutu te huaview

Paepae Mua

Whakaahua: Mua view of the Rigol DS1054Z, showing the large display, channel inputs, and control buttons.

The front panel features a large 7-inch WVGA (800x480) TFT display for clear waveform visualization. Key controls include:

• Channel Inputs (CH1-CH4): BNC connectors for connecting probes.
• Ngā Mana Poutū: Knobs and buttons for adjusting vertical scale (Volts/Div) and position for each channel.
• Ngā Mana Whakapae: Knobs for adjusting horizontal scale (Sec/Div) and position.
• Trigger Controls: Buttons and knobs for setting trigger level, mode, and source.
• Pātene Mahi: Dedicated buttons for Measure, Acquire, Storage, Cursor, Display, Utility, Help, and Menu navigation.
• Tauranga Kaihautū USB: Located on the front for connecting USB storage devices.

Paewhiri Whakamuri

Whakaahua: Rear view of the Rigol DS1054Z, showing power input, LAN, USB, and auxiliary ports. The serial number DS1ZA233608157 is visible.

The rear panel provides essential connectivity options:

• Whakauru Hiko: Mo te hono i te taura hiko AC.
• Tauranga LAN: For network connectivity and remote control.
• USB Device Port: Mo te hono ki te rorohiko.
• Aux (TrigOut / PassFail) Port: An auxiliary output for trigger signals or Pass/Fail testing.

Tatūnga

Hononga Mana

1. Ensure the oscilloscope is turned off.
2. Honoa te taura hiko kua whakaratohia ki te tāuru hiko kei te papa o muri o te oscilloscope.
3. Monohia tetahi pito o te taura hiko ki tētahi putanga hiko AC kua whenua.

Probe Connection and Compensation

1. Connect the probe to one of the BNC input channels (CH1-CH4) on the front panel.
2. Attach the probe clip to the probe compensation test point (usually a square wave output) on the front panel.
3. Whakakāhia te oscilloscope.
4. Adjust the probe compensation using a small screwdriver on the probe body until a flat-top square wave is displayed on the screen. This ensures accurate measurements.

Image: The Rigol DS1054Z in an operational setup, demonstrating probe connection and signal acquisition.

Nga Tohutohu Whakahaere

Inenga Taketake

The DS1054Z offers a wide range of measurement capabilities:

• Tīpakonga Hongere: Use the CH1-CH4 buttons to enable or disable channels.
• Vertical Scale: Adjust the Volts/Div knob to change the vertical sensitivity.
• Horizontal Scale: Adjust the Sec/Div knob to change the time base.
• Tatūnga Aunoa: Pehia te AUTO button for automatic setup of vertical, horizontal, and trigger systems.
• Measure Function: Pehia te Ine button to display automatic measurements such as frequency, period, peak-to-peak voltage, me etahi atu.
• Nga Mahi Pangarau: Whakamahia te MATH button for waveform operations like addition, subtraction, multiplication, division, FFT, and integration.

Multiple waveform display.

Single pulse waveform analysis.

Rising and falling edge signals.

Decoded serial data display.

Amplitude modulated waveform.

Complex multi-channel signal.

Lissajous figures for phase analysis.

Whakatairanga

Triggering is crucial for stable waveform display. Use the trigger controls to set the trigger type (Edge, Pulse, Slope, Video, etc.), source (CH1-CH4, AC Line, External), and level. The DS1054Z supports advanced triggering options to capture specific events.

Waveform Display and Analysis

The UltraVision technology provides a deeper memory (12 Mpts, upgradable to 24 Mpts) and a high waveform capture rate (up to 30,000 wfms/s), allowing for the capture of transient events and detailed signal analysis. The multi-level intensity grading display helps visualize signal variations over time.

Te tiaki

• Te horoi: Whakamahia he kakahu ngohengohe, maroke hei horoi i te taha waho o te oscilloscope. Mō te paru uaua, he paku iti te paninga.amp cloth with mild detergent can be used. Do not use abrasive cleaners or solvents.
• Rokiroki: Store the oscilloscope in a cool, dry place, away from direct sunlight and extreme temperatures. When not in use for extended periods, disconnect the power cord.
• Whakatikatika: For optimal performance, periodic calibration by qualified service personnel is recommended.

Raparongoā

If you encounter issues with your Rigol DS1054Z, refer to the table below for common problems and solutions.

Whakatakotoranga

Key technical specifications for the Rigol DS1054Z Digital Oscilloscope:

Nga korero Whakaputanga

The Rigol DS1054Z Digital Oscilloscope comes with a 3-TU TAU warranty. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the documentation provided with your product or visit the official Rigol webpae.

Tautoko

For technical support, product inquiries, or service requests, please contact Rigol customer support through their official channels. You can find more information and resources on the Rigol Official Store on Amazon o ratou umanga ranei webpae.