Kupu Whakataki
The Polk Audio T50 Floor Standing Tower Speaker is engineered to deliver powerful, high-performance sound for both home theater and stereo applications. Featuring Polk's Dynamic Balance technology, a 1-inch silk dome tweeter, a 6.25-inch composite driver, and two front-firing sub-bass radiators, the T50 provides crisp highs, detailed mids, and deep, impactful bass. It is designed to integrate seamlessly into most home theater receivers and stereos, supporting Dolby and DTS for an immersive audio experience.
He aha kei roto i te Pouaka
- 1 x Polk Audio T50 Tower Speaker
- 1 x Pouaka Kōrero
- Kaari Rehita Rarangi
Tatūnga
Setting up your Polk Audio T50 Tower Speaker is designed to be straightforward. Follow these steps for optimal performance:
- Turanga: Position the tower speakers in your listening area, ensuring they are equidistant from your primary listening position for a balanced soundstage. For home theater setups, place them to the left and right of your television or projection screen.
- Hononga: Connect the speaker wire from your AV receiver or stereo amplifier to the 5-way binding posts on the back of the T50 speaker. Ensure correct polarity (positive to positive, negative to negative) for optimal sound reproduction.
- Āpitihanga o te Matapihi: The speaker grille can be attached magnetically to the front of the speaker for protection and aesthetic preference.
- Whakauru Pūnaha: The T50 speakers are timbre-matched with other Polk T-Series speakers, allowing for seamless integration into a larger surround sound system (e.g., with T15 surrounds and a T30 center channel).
Whakaahua 1: Whakamuri view of the Polk Audio T50 speaker showing the 5-way binding posts for easy and secure wire hookup.
Whakaahua 2: Example placement of two Polk Audio T50 tower speakers in a home theater setup, demonstrating seamless sound integration.
Ataata 1: Kua mutuview of the Polk T-Series speakers, highlighting their design and features for home audio setups.
Te whakahaere
Once properly connected, your Polk Audio T50 speakers will operate in conjunction with your audio receiver or amplifier. Ensure your receiver is powered on and set to the correct input source. Adjust volume levels on your receiver. The T50 speakers are designed to reproduce a wide range of frequencies, providing clear audio for movies, music, and games.
Figure 3: The Polk Audio T50 speaker integrated into a home audio environment, ready for use.
Te tiaki
To ensure the longevity and optimal performance of your Polk Audio T50 speakers, follow these simple maintenance guidelines:
- Te horoi: Gently wipe the speaker cabinets with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the finish.
- Tiaki tunutunu: The speaker grilles can be carefully removed and dusted. If necessary, they can be gently vacuumed with a soft brush attachment.
- Taiao: Place speakers in a stable location away from direct sunlight, excessive heat, moisture, or extreme temperature changes. Ensure adequate ventilation around the speakers.
- Hononga: Tirohia ngā hononga waea kaikorero i ia wā, i ia wā, kia mōhio ai kei te mau tonu, ā, kāore he waikura.
Raparongoā
If you encounter issues with your Polk Audio T50 speakers, consider the following common troubleshooting steps:
- Kore Oro:
- Verify that your AV receiver or ampKa whakakāhia te rama, ā, ka tīpakohia te pūtake tāuru tika.
- Check all speaker wire connections at both the speaker and the receiver for proper polarity and secure contact.
- Ensure the volume on your receiver is not muted or set too low.
- Oro korikori:
- Reduce the volume level on your receiver.
- Check speaker wire connections for any loose strands that might be touching each other or the wrong terminal.
- Ensure your receiver's impedance settings match the speaker's impedance (6 Ohms).
- Oro Taurite:
- Confirm that both speakers are connected with correct polarity.
- Check speaker placement to ensure they are symmetrically positioned relative to your listening area.
- Adjust the balance settings on your AV receiver.
Whakatakotoranga
| Āhuahira | Whakatakotoranga |
|---|---|
| Momo Whakaeke | Papa Tu Tu |
| Rauemi | Te rakau |
| Ingoa Tauira | T50 |
| Momo Kaikorero | Pourewa |
| Āhuahira Motuhake | Hi-Res Audio, Multi-Room Audio |
| Nga Whakamahinga Manakohia | Mo nga punaha oro a tawhio noa |
| Pūrere Hototahi | Most Home Theater AV Receivers |
| Taimana Tuarua | 6.5 Inihi |
| Tatau Waeine | 1.0 Tatau |
| Whirihoranga Hongere oro a tawhio noa | 2.1, 5.1 |
| Tae | Pango |
| Hunga Hua | 7.75"D x 8.75"W x 36.25"H |
| Taumaha Tūemi | 20.35 Pauna |
| Te aukati | 6 Ohm |
| Awhe Morahi | 7 Mita |
| Tikanga Mana | Paa |
| Rahi Kaioro | 6.5 Inihi |
| Puna Mana | Hiko Hiko |
| Woofer Diamita | 6 Inihi |
| Diamita Tweeter | 1 Inihi |
| Momo Atekōkiri Ororongo | Atekōkiri Hihiko |
| Rahi Atekōkiri Ororongo | 6.25 Inihi |
| Kaikorero Te Mana Putanga Morahi | 150 Watts |
| Whakautu auau | 24000 Hz |
| Hangarau Hononga | Waea |
| Aratau Putanga Ororongo | Karapoti |
Figure 4: Detailed dimensions of the Polk Audio T50 Floor Standing Tower Speaker.
Pūtāhui
The Polk Audio T50 Floor Standing Tower Speaker comes with a Full Warranty. Please refer to the included Warranty Registration Card for specific terms, conditions, and registration details. Retain your proof of purchase for any warranty claims.
Tautoko
For further assistance, technical support, or service inquiries regarding your Polk Audio T50 speakers, please visit the official Polk Audio website or contact their customer service department. You can find contact information on the Warranty Registration Card or the brand's official webpae.
