RICOO S5244 Full Motion TV Wall Mount Instruction Manual

1. Kupu Whakataki

This manual provides comprehensive instructions for the safe and correct installation, operation, and maintenance of your RICOO S5244 Full Motion TV Wall Mount. Please read all instructions carefully before beginning installation and retain this manual for future reference.

The RICOO S5244 is designed to securely mount flat-panel televisions ranging from 32 to 55 inches, with a maximum weight capacity of 50 kg. It supports various VESA mounting patterns and offers full motion capabilities including swivel, tilt, and rotation for optimal viewnga koki.

Image 1.1: The RICOO S5244 Full Motion TV Wall Mount, shown in its compact, folded position.

2. Nga korero haumaru

WHAKATŪPATO: Improper installation may result in serious personal injury and property damage. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer.

• Me whakarite kia taea e te mata whakairi te tautoko i te taumaha o te whakairinga me te pouaka whakaata.
• Use only the provided hardware. Do not use the wall anchors for drywall or plaster walls; they are intended for solid concrete walls only.
• Kaua e neke ake i te kaha o te kawenga o te 50 kg (110 lbs).
• Always check the VESA pattern of your TV before installation to ensure compatibility.
• Tiakina nga tamariki me nga kararehe i te wa e whakauru ana.

3. Ihirangi mokete

Verify that all components are present and undamaged before proceeding with installation. Refer to the parts list in your packaging for a complete inventory.

4. Tatūnga me te Tāuta

4.1 Tirohanga i mua i te whakaurunga

Before mounting, confirm the following:

1. Taumaha TV: Your TV must not exceed 50 kg (110 lbs).
2. Hototahitanga VESA: Check the four mounting holes on the back of your TV. Measure the horizontal and vertical distance between them. The mount supports VESA patterns from 200x200 mm up to 400x400 mm.

Image 4.1: Illustration demonstrating how to measure VESA hole patterns on a television. The mount supports horizontal distances from 50mm to 400mm and vertical distances from 150mm to 400mm.

Image 4.2: Visual guide for compatible TV sizes (30-55 inches) and VESA patterns (100x100 to 400x400) for the S5244 mount.

4.2 Te Whakamau i te Pereti Pakitara

1. Determine the desired height and position for your TV. Use a stud finder to locate wall studs if mounting on wood stud walls.
2. Place the wall plate against the wall at the desired height and use a level to ensure it is perfectly horizontal. Mark the drilling holes.
3. Drill pilot holes according to the marked positions. For concrete walls, use a masonry drill bit and the provided concrete anchors. For wood studs, drill pilot holes directly into the center of the studs.
4. Secure the wall plate to the wall using the appropriate screws and washers. Ensure all screws are tightened firmly.

4.3 Te Tāpiri i ngā Whatunga Pouaka Whakaata ki te Pouaka Whakaata

1. Āta whakatakotoria tō pouaka whakaata ki raro ki runga i tētahi mata ngohengohe, ma, kia kore ai e pakaru te mata.
2. Attach the two vertical TV brackets to the back of your television using the screws that fit your TV's VESA holes. Ensure the brackets are centered and securely fastened. Do not overtighten.

4.4 Mounting the Television to the Wall Plate

1. Me te āwhina, hikitia mārire te pouaka whakaata me ngā whīra e mau ana.
2. Whakamaua ngā whāriki pouaka whakaata ki te pereti pakitara. Kia tino mau te whakanoho o te pouaka whakaata ki runga i te pereti pakitara.
3. Engage any safety locking mechanisms on the brackets to prevent accidental dislodgement.

5. Operating the TV Wall Mount

The RICOO S5244 offers flexible viewing options through its full motion capabilities.

5.1 Whakatikatika Hurihuri

The mount allows for swiveling the TV up to 120 degrees (60 degrees left and 60 degrees right), depending on the TV size and wall clearance. Gently push or pull the TV to the desired angle.

Image 5.1: A television mounted on the S5244, demonstrating its ability to swivel up to 120 degrees for flexible viewing.

5.2 Whakaritea Tilt

The TV can be tilted +12 degrees upwards and -3 degrees downwards. Loosen the tilt adjustment knobs on the TV brackets, adjust to the desired angle, and then re-tighten the knobs to secure the position.

Image 5.2: The S5244 mount allowing a television to tilt up to 15 degrees (shown as 15 degrees up and 15 degrees down, but product specs state +12/-3 degrees).

5.3 Rotation Adjustment

For fine-tuning the level of your TV after installation, the front plate allows for a rotation adjustment of +/-3 degrees. This helps correct any slight misalignment.

Image 5.3: Illustration of the +/-3 degree rotation adjustment feature for leveling the television.

5.4 Wall Distance

The mount allows the TV to be positioned at a minimum distance of 80 mm from the wall and extended up to 370 mm.

Image 5.4: Visual representation of the adjustable wall distance, from a minimum of 80mm to a maximum of 370mm.

6. Tiaki

Ko te tiaki i nga wa katoa ka mau te roa me te mahi haumaru o to whakairinga pakitara pouaka whakaata.

• Te horoi: Horoia te papa ki te kakahu ngohengohe, maroke. Āta karohia ngā kai horoi me ngā whakarewa.
• Takitaki Ia Waa: Takitaki ia ia nga wa katoa nga wiri me nga hononga kia mau tonu, kia mau. Whakapiri ano mehemea e tika ana.
• Nekehanga: If the movement becomes stiff, apply a small amount of silicone-based lubricant to the articulating joints. Do not use oil-based lubricants.

7. Te Raru

If you encounter issues with your TV wall mount, refer to the following common solutions:

• Kāore i te Taumata te Pouaka Whakaata: Use the +/-3 degree rotation adjustment feature to level the TV. Ensure the wall plate was installed level initially.
• Difficulty Moving TV: Check if any cables are snagged or if the tilt/swivel mechanisms are overtightened. Loosen slightly if needed. Ensure the TV weight is within the specified limit.
• Te Maamaa Maunga: Immediately remove the TV from the mount. Re-check all wall plate and TV bracket connections. Ensure the wall anchors are appropriate for your wall type and securely installed. If unsure, consult a professional.

8. Whakatakotoranga

Image 8.1: Detailed technical drawing showing the dimensions and range of motion for the RICOO S5244 wall mount.

9. Pūtāhui me te Tautoko

Specific warranty information for the RICOO S5244 TV Wall Mount is not provided in this manual. For detailed warranty terms, product support, or to contact customer service, please visit the official RICOO webpae, tirohia ranei ki te kohinga hua.

For further assistance, you may visit the RICOO brand store on Amazon: RICOO Brand Store