1. Kupu Whakataki
This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Legrand LEG97605 300W Non-Flush Rotary Dimmer Switch. Please read this manual thoroughly before installation and use, and retain it for future reference.
The Legrand LEG97605 is a 300W dimmer switch designed for surface mounting, featuring a rotary button for light intensity control and an integrated push-button for ON/OFF functionality. It is suitable for 1-way circuit applications.
Whakaahua 1: Mua view of the Legrand LEG97605 Dimmer Switch.
2. Nga Korero Haumaru Nui
WARNING: RISK OF ELECTRIC SHOCK. Always turn off power at the circuit breaker or fuse box before installing or servicing this device. Improper installation can result in serious injury or death.
- Me mahi te tāutanga e te tohunga hiko whai tohu, e ai rānei ki ngā ture hiko ā-rohe.
- Kaua e neke ake i te wat teiteitage whakatauranga o 300W.
- Me whakarite kia mau nga hononga waea katoa me te whakamaarama tika.
- Kua hoahoatia tenei taputapu mo te whakamahi o roto anake.
- Do not use with incompatible load types (e.g., certain LED drivers, fluorescent fixtures) unless specified by the manufacturer.
3. Ihirangi mokete
Manatokona kei te noho nga waahanga katoa i mua i te tiimata o te whakaurunga:
- Legrand LEG97605 300W Non-Flush Rotary Dimmer Switch (1 unit)
- Mounting Screws (Quantity may vary)
- Pukapuka Tohutohu (Tenei tuhinga)
Figure 2: Legrand LEG97605 Dimmer Switch as packaged.
4. Tohutohu Tāuta
Follow these steps carefully to install your dimmer switch:
- Whakaweto Hiko: Locate the circuit breaker or fuse controlling the light fixture you intend to dim. Switch it to the OFF position. Verify power is off using a voltage te kaiwhakaatu i mua i te haere.
- Whakaritea te Tauwāhi Whakapuru: The LEG97605 is a non-flush, surface-mount dimmer. Choose a suitable wall location for mounting.
- Waea waea:
- Identify the live (line) wire and the load wire (to the light fixture).
- Connect the incoming live wire to the terminal marked 'L' or 'Input' on the dimmer switch.
- Connect the wire going to the light fixture (load wire) to the terminal marked 'Load' or 'Output' on the dimmer switch.
- Ensure all connections are tight using the screw terminals.
- Whakapiki: Secure the dimmer switch to the wall surface using the provided mounting screws. Ensure it is firmly attached and level.
- Whakaora i te Mana: Kia oti te tāutanga, ā, kia mau katoa ngā hononga, tahurihia anō te hiko i te wāhi pakaru hiko.
Whakaahua 3: Runga view of the dimmer switch, illustrating potential wiring points.
5. Operating Your Dimmer Switch
The Legrand LEG97605 dimmer switch features a rotary knob for dimming and an integrated push-button for ON/OFF control.
- To Turn ON/OFF: Press the rotary knob firmly. You will hear a click, and the light will turn on or off.
- To Dim/Brighten: Rotate the knob clockwise to increase light intensity and counter-clockwise to decrease light intensity.
Whakaahua 4: Koki view highlighting the rotary control knob.
6. Tiaki
Your Legrand dimmer switch requires minimal maintenance.
- Te horoi: To clean the surface of the dimmer, wipe with a soft, damp kakahu. Kaua e whakamahi i nga kai horoi, nga whakarewa, nga matū kino ranei, na te mea ka pakaru te mutunga.
- Tirotiro: Periodically inspect the switch for any signs of damage or loose connections. If any issues are found, turn off power and consult a qualified electrician.
7. Te Raru
If you experience issues with your dimmer switch, refer to the following common problems and solutions:
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kaore e marama te rama. | No power to the switch; incorrect wiring. | Check circuit breaker/fuse. Verify wiring connections are correct and secure. |
| Light does not dim or dims poorly. | Incompatible bulb type; minimum load not met. | Ensure all connected bulbs are dimmable. Check if the total wattage of bulbs meets the dimmer's minimum load requirement (if any). |
| Ka kemo, ka haruru rānei te mārama. | Loose wiring connection; incompatible bulb type; electrical interference. | Turn off power and check all wire connections. Replace bulbs with high-quality dimmable types. Consult an electrician if problem persists. |
| Dimmer feels hot to the touch. | Overload or improper wiring. | Turn off power immediately. Verify total connected wattage does not exceed 300W. Consult a qualified electrician. |
If the problem persists after attempting these solutions, contact Legrand customer support or a qualified electrician.
8. Whakatakotoranga Hangarau
| Āhuahira | Taipitopito |
|---|---|
| Waitohu | Legrand |
| Tau tauira | LEG97605 |
| Aratau Mahi | ON-OFF |
| Whakatauranga o naianei | 10 Amps |
| Wattage | 300 Watts |
| Momo Whakapā | Tuwhera noa |
| Momo Tuhono | Tīwiri |
| tauranga | tīwiri |
| Momo iahiko | 1-ara |
| Momo Whakaoho | Hurihuri |
| Momo Kaiwhakahaere | Patene Pana |
| Rauemi Whakapā | Te parahi |
| Whakatauranga Tiaki o te Ao | IP54 |
| Momo Whakaeke | Maunga Mata |
| Tae | Mā |
| Taumaha Tūemi | 2.46 hekere |
| Te Ra Tuatahi Wātea | Mahuru 25, 2015 |
9. Pūtāhui me te Tautoko Kiritaki
For warranty information, technical assistance, or to report a problem, please contact Legrand customer support. Refer to the official Legrand webte waahi, te kohinga hua ranei mo nga korero whakapiri o naianei.
Legrand Official Webpae: www.legrand.us
