Pukapuka Kaiwhakamahi mō te Pūoko Ine Pūoko AFR AEM 30-0300 X-Series Whānui UEGO

1. Kupu Whakataki

This manual provides comprehensive instructions for the installation, operation, and maintenance of the AEM 30-0300 X-Series Wideband UEGO Air/Fuel Ratio (AFR) Sensor Controller Gauge. The AEM X-Series Wideband UEGO gauge utilizes advanced X-Digital technology to deliver fast and accurate air/fuel ratio readings, crucial for optimal engine tuning and monitoring.

2. Nga korero haumaru

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Always ensure proper ventilation when working on vehicles. Disconnect the vehicle's battery before performing any electrical work. Incorrect installation or use can lead to vehicle damage or personal injury. If you are unsure about any installation steps, consult a qualified automotive technician.

3. He aha kei roto i te Pouaka

The AEM 30-0300 X-Series Wideband UEGO AFR Sensor Controller Gauge package includes the following components:

• X-Series Wideband UEGO AFR Sensor Controller Gauge
• Wideband UEGO Sensor
• Wiring Harnesses (Power/Ground, Sensor, Output)
• Whakaekea taputapu
• Installation Instructions (refer to the full PDF manual for detailed diagrams)

Image 3.1: All components included with the AEM 30-0300 X-Series Wideband UEGO AFR Sensor Controller Gauge. This includes the gauge, wideband sensor, various wiring harnesses, and mounting accessories.

4. Nga waahanga matua

The AEM 30-0300 X-Series Wideband UEGO AFR Sensor Controller Gauge offers several advanced features:

• X-Digital Wideband Technology: Provides faster response times and more accurate readings compared to conventional wideband controllers.
• Whakaatu Mamati Nui: Features a modern, visually striking faceplate with a seven-segment center display that is 87% larger than previous models, enhancing readability.
• Data Logging Outputs: Includes 0-5v and RS232 Serial Port outputs for feedback control and data logging.
• AEMnet (CANbus) Output: Allows for seamless data logging and integration with other AEMnet compatible devices.
• Optimized Engine Tuning: Improved response time enhances wideband feedback control, contributing to a safer, more powerful, and accurate engine tune.

5. Tatūnga me te Tāuta

Proper installation is critical for the accurate and reliable operation of your AEM X-Series Wideband UEGO Gauge. It is recommended that installation be performed by a qualified professional.

5.1 Whakaaturanga Whakaoho

The wideband UEGO sensor must be installed in the exhaust system. For optimal performance, install the sensor at least 18 inches downstream from the exhaust port, before any catalytic converters. Ensure the sensor bung is welded securely and the sensor is oriented to prevent condensation buildup.

5.2 Gauge Mounting

Mount the gauge in a location that is easily visible to the driver and protected from direct moisture and extreme heat. The gauge fits into a standard 52mm (2-1/16 inch) opening.

Whakaahua 5.1: Taha view of the AEM 30-0300 gauge, illustrating its compact design and the rear mounting studs for secure installation into a dashboard or gauge pod.

5.3 Hononga Waea

The gauge requires power, ground, and connections to the wideband sensor. Additionally, there are output wires for data logging and feedback control. Refer to the official AEM user guide PDF for detailed wiring diagrams specific to your application.

Image 5.2: The wideband sensor and associated wiring harnesses. Proper connection of these components is essential for accurate AFR readings and data output.

For detailed wiring diagrams and installation steps, please refer to the official AEM User Guide PDF linked in Section 9.

6. Nga Tohutohu Whakahaere

Once properly installed and powered, the AEM X-Series Wideband UEGO Gauge will display the current Air/Fuel Ratio (AFR) or Lambda value. The gauge automatically calibrates the sensor upon startup.

6.1 Te Panui i te Whakaaturanga

The large seven-segment display shows the numerical AFR value. The outer LED sweep provides a quick visual reference of the AFR range. The gauge typically displays AFR values from 8:1 (rich) to 20:1 (lean).

Atahanga 6.1: Whakatata view of the AEM 30-0300 gauge display, showing a typical AFR reading and the surrounding LED sweep for quick visual interpretation.

6.2 Mode and Select Buttons

The gauge features 'MODE' and 'SEL' (Select) buttons, typically located on the front or side of the unit. These buttons allow you to cycle through display modes (e.g., AFR, Lambda) or perform specific functions as outlined in the detailed user manual.

7. Tiaki

The AEM X-Series Wideband UEGO Gauge and sensor are designed for durability, but proper maintenance ensures longevity and accuracy.

• Te ora pūoko: The lifespan of the wideband sensor is dependent on fuel type, engine condition, and operating environment. Regular inspection for contamination is recommended.
• Te horoi: Keep the gauge display clean using a soft, dry cloth. Avoid abrasive cleaners or solvents.
• Waea waea: Tirohia ngā hononga waea katoa i ia wā, mō te piri me ngā tohu o te pakaru, te pakaru rānei.

8. Te Raru

If you encounter issues with your AEM X-Series Wideband UEGO Gauge, consider the following common troubleshooting steps:

• 'SEnS' Error: This typically indicates a sensor issue, such as a disconnected, faulty, or unheated sensor. Check sensor wiring and ensure the sensor is properly installed and receiving power.
• Kore Whakaatu: Verify all power and ground connections to the gauge. Check for blown fuses in the power circuit.
• Nga Panui Heke: Ensure the sensor is correctly installed and not contaminated. Verify that the gauge is receiving stable power.
• Panui Waarua: Check for loose wiring connections or potential electrical interference.

For more detailed troubleshooting guides and error codes, refer to the complete AEM User Guide PDF.

9. Whakatakotoranga

10. Pūtāhui me te Tautoko

For warranty information, please refer to the documentation provided with your product or visit the official AEM website. AEM provides technical support for its products. If you require assistance with installation, operation, or troubleshooting beyond the scope of this manual, please contact AEM customer service directly.

11. Ētahi atu rauemi

For the most detailed and up-to-date installation instructions, wiring diagrams, and advanced features, please download the official AEM User Guide PDF:

Tikiake Aratohu Kaiwhakamahi Whaimana (PDF)