Pukapuka Tohutohu mō te Pana Whakawhiti VIMAR 0R14005 Plana Raupapa 1-Pole 16AX

1. Kupu Whakataki

This manual provides essential instructions for the safe and proper installation, operation, and maintenance of the VIMAR 0R14005 Plana Series 1-Pole 16AX Diverter Switch. Please read this manual thoroughly before use and retain it for future reference. This device is designed for controlling electrical circuits, typically for switching between two different lighting points or functions from a single location.

2. Hua Neke Atuview

2.1 Nga waahanga matua

• Momo Mana: Toggle, button mechanism for reliable switching.
• Momo Whakatika: Snap-in design for secure installation in compatible frames.
• Tauira: A modular device suitable for integration into VIMAR Plana series switch programs.
• Whakatauranga Tiaki: Suitable for environments requiring an IP40 protection rating.
• Whakamarama: Designed to be illuminable, with a replaceable button (illumination module sold separately).
• Raukaha: Rated for 1-pole, 16 AX, 250 V~, supporting up to 200 W for lamps with integrated power supply (IEC 60669-1:2017).

2.2 Waehanga

The VIMAR 0R14005 Diverter Switch consists of the main switch module. It is designed to be integrated into a VIMAR Plana series support frame and then covered by a compatible wall plate (not included).

Whakaahua 1: Mua view of the VIMAR 0R14005 Plana Series 1-Pole 16AX Diverter Switch. This image shows the white button and the overall rectangular shape of the switch module, ready for integration into a wall plate.

Whakaahua 2: Inerite view of the VIMAR 0R14005 Plana Series 1-Pole 16AX Diverter Switch. This view e whakaatu ana i te taha ngaiofile and the snap-in tabs at the top and bottom, which secure the module within a support frame.

3. Nga korero haumaru

• Pūmate Hiko: Always disconnect the main power supply at the circuit breaker or fuse box before attempting any installation, wiring, or maintenance. Failure to do so can result in serious injury or death.
• Kaimahi Tohu: Installation and wiring should only be performed by a qualified electrician in accordance with all local and national electrical codes and regulations.
• Voltage me o nāianei: Kaua e nui ake i te vol kua whakariteatage (250 V~) and current (16 AX) ratings of the switch. Overloading can cause damage to the device and create a fire hazard.
• Nga Tikanga Taiao: Ensure the installation environment is dry and within the specified operating temperature range. This device is rated IP40, meaning it is protected against solid objects larger than 1mm, but not against water.
• Tikanga Hua: Do not modify or disassemble the switch. Use only genuine VIMAR accessories and components.

4. Tāuta (Tatūnga)

This section outlines the general steps for installing the VIMAR 0R14005 Diverter Switch. Specific wiring diagrams for diverter switches should be consulted based on your electrical system and local regulations.

1. Momotu Mana: Turn off the power to the circuit at the main electrical panel. Verify that the power is off using a voltage Kaiwhakamatautau.
2. Whakaritea Waea: Ensure that the electrical wires (live, switched live 1, switched live 2, and earth if applicable) are properly stripped and ready for connection.
3. Tūhono Waea: Connect the wires to the terminals on the back of the VIMAR 0R14005 switch. Refer to the wiring diagram provided with your VIMAR Plana support frame or consult a qualified electrician for correct diverter switch wiring. Typically, a diverter switch has three terminals for the switched live wires and one for the common live wire.
4. Mount Switch Module: Snap the VIMAR 0R14005 switch module into the appropriate opening of a VIMAR Plana series support frame. Ensure it clicks securely into place.
5. Install Support Frame: Secure the support frame, with the switch module installed, into the flush-mounted electrical box in the wall.
6. Whakapiri Pereti Taiepa: Once the support frame is securely mounted, attach the decorative VIMAR Plana series wall plate over the frame and switch module.
7. Whakaora i te Mana: Whakahokia te hiko ki te paewhiri hiko matua.
8. Taumahinga Whakamatau: Test the switch to ensure it operates correctly, controlling the intended lighting or circuit.

5. Mahi

The VIMAR 0R14005 is a diverter switch, meaning it allows you to control a single electrical load (e.g., a light) from two different locations when paired with another diverter switch, or to switch between two different circuits from one location. Its operation is straightforward:

• Whakawhiti: Pressing the toggle button will change the state of the connected circuit. For a diverter setup, this means it will either complete or break the circuit path, allowing the load to be controlled from either switch.
• Illumination (Optional): If an optional illumination module is installed, the button may light up to indicate its state or for easy location in the dark.

6. Tiaki

The VIMAR 0R14005 Diverter Switch requires minimal maintenance to ensure long-term performance.

• Te horoi: To clean the surface of the switch, gently wipe it with a soft, dry, or slightly damp kakahu. Kaua e whakamahia nga kai horoi, nga whakarewa, nga matū kino ranei, na te mea ka taea e enei te pakaru te whakaoti, nga waahanga o roto ranei.
• Tirotiro: Tirohia te pana i ia wā, i ia wā, mō ngā tohu o te pakaru, o ngā hononga ngoikore, o te tae rānei o te tae. Mēnā ka kitea he raruraru, momotuhia te hiko, ka kōrero ki tētahi tohunga hiko whai tohu.
• Button Replacement: If the button or its illumination module (if installed) needs replacement, ensure power is disconnected before carefully prying off the old button and snapping in the new one.

7. Te Raru

If you encounter issues with your VIMAR 0R14005 Diverter Switch, refer to the following common troubleshooting steps:

• Kāore te pana e whakautu:
  • Check if the main power supply to the circuit is on.
  • Ensure all wiring connections are secure and correct according to the wiring diagram.
  • If part of a multi-way switching setup, check the other diverter switch(es) for proper operation.
• Illumination Not Working (if applicable):
  • Verify that the illumination module is correctly installed and connected.
  • Check if the illumination module itself is faulty and requires replacement.
• Te wera nui, te kanga wera ranei:
  • Momotuhia tonutia te hiko mai i te ara iahiko.
  • This indicates a serious electrical issue. Do not attempt to fix it yourself. Contact a qualified electrician immediately.

If the problem persists after attempting these steps, contact a qualified electrician or VIMAR technical support.

8. Whakatakotoranga

9. Pūtāhui me te Tautoko

VIMAR products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or visit the official VIMAR website. For technical assistance, troubleshooting beyond this manual, or to inquire about spare parts, please contact your local VIMAR distributor or customer support.

Mana o VIMAR Webpae: www.vimar.com