Crosley C200 Direct-Drive Turntable Instruction Manual

Kupu Whakataki

This manual provides detailed instructions for the setup, operation, and maintenance of your Crosley C200 Direct-Drive Turntable. Please read this manual thoroughly before using the product to ensure proper function and longevity.

Nga Tohutohu Haumaru Nui

• Panuihia nga tohutohu katoa i mua i te whakamahi.
• Puritia tenei pukapuka hei tohutoro a meake nei.
• Kaua e whakamahia tenei taputapu tata ki te wai.
• Horoia ki te kakahu maroke anake.
• Kaua e araia nga whakatuwheratanga hau. Tāutahia kia rite ki nga tohutohu a te kaihanga.
• Kaua e whakauruhia ki te taha o nga puna wera penei i nga radiators, nga rehita wera, nga umu, me etahi atu taputapu (tae atu ki ampkaiwhakaora) e whakaputa ana i te wera.
• Tiakihia te taura hiko kia kaua e hikoi, ka kowhakina mai ranei, ina koa ki nga moko, nga waahi waatea, me te waahi ka puta mai i te taputapu.
• Me whakamahi noa i nga taapiri / taputapu kua tohua e te kaiwhakanao.
• Wewetehia tenei taputapu i te wa e uira ana te tupuhi, i te kore ranei e whakamahia mo te wa roa.
• Tukuna nga ratonga katoa ki nga kaimahi ratonga whai tohu. Ka hiahiatia he ratonga ina kua pakaru nga taputapu i tetahi huarahi, penei i te taura hiko, te mono ranei kua pakaru, kua maringi te wai, kua taka ranei nga taonga ki roto i te taputapu, kua kitea te taputapu ki te ua, ki te makuku ranei, kaore e mahi noa. , kua tukuna ranei.

Ihirangi mokete

Ensure all items listed below are included in your package:

• Crosley C200 Direct Drive Turntable
• Pukapuka Kaiwhakamahi (tenei tuhinga)
• Uwhi Puehu
• Pereti me te Whitiki Puku
• Whāriki Paheke Whero
• Taumaha
• Head Shell with Audio-Technica Magnetic Cartridge
• 45 RPM Whurutau
• Ngā Taura Putanga RCA

Nga Waeine Neke Atuview

Familiarize yourself with the main components of your turntable.

Tatūnga

1. Tāutanga o te Pereti me te Whitiki Puku

1. Carefully place the platter onto the center spindle.
2. Locate the drive belt, which is pre-installed on the underside of the platter.
3. Using the red ribbon attached to the drive belt, gently pull the belt over the motor pulley. Ensure the belt is not twisted.
4. Remove the red ribbon.
5. Whakatakotoria te whāriki pahekeheke ki runga i te pereti.

2. Tone Arm Assembly and Balancing

1. Tāuta Taumaha: Slide the counterweight onto the rear of the tone arm with the numbers facing forward.
2. Attach Head Shell: Carefully attach the head shell (with the Audio-Technica cartridge) to the end of the tone arm. Turn the locking nut until it is firmly in place.
3. Tangohia te Kaitiaki Stylus: Tangohia mārire te pare kirihou mārama o te pene matihiko mai i te kātere.
4. Unlock Tone Arm: Release the tone arm from its rest using the tone arm lock.
5. Balance Tone Arm: Adjust the counterweight by rotating it until the tone arm floats parallel to the platter without touching it. The tone arm should be level.
6. Set Tracking Force: Once balanced, hold the counterweight steady and rotate only the numbered ring to '0' on the center line. Then, rotate the entire counterweight counter-clockwise until the number '2' aligns with the center line. This sets the tracking force to 2 grams, which is optimal for the included cartridge.
7. Set Anti-Skate: Locate the anti-skating dial near the tone arm base. Set this dial to '2' to match the tracking force.
8. Lock Tone Arm: Return the tone arm to its rest and secure it with the tone arm lock.

3. Connecting to Audio System

1. Connect the RCA output cables from the turntable to your ampkaiwhakaoho, kaikorero hiko ranei.
2. Use the PHONO/LINE switch on the rear of the turntable to select the appropriate output:
   • PHONO: Use if your amplifier has a dedicated phono input.
   • LINE: Use if your amplifier has a standard auxiliary input or if connecting to powered speakers. The turntable's built-in pre-amplifier will be active.
3. Connect the power adapter to the turntable and then to a wall outlet.

Nga Tohutohu Whakahaere

1. Te purei Rekoata

1. Place a record on the platter. If playing a 45 RPM single, use the included 45 RPM adapter.
2. Select the correct speed (33 1/3 or 45 RPM) using the speed selector switch.
3. Unlock the tone arm from its rest.
4. Lift the cueing lever to raise the tone arm.
5. Manually position the tone arm over the desired starting groove of the record.
6. Tukua mārire te rīpene tohu kia taea ai te heke iho o te pene tuhi ki runga i te rekoata.
7. To stop playback, lift the cueing lever, return the tone arm to its rest, and lock it.

2. Bluetooth Connectivity (Built-In Receiver)

The Crosley C200 features a built-in Bluetooth receiver, allowing you to stream audio from a Bluetooth-enabled device to the turntable's output. This means you can use the turntable as a Bluetooth speaker for your phone or tablet.

1. Me mohio kei te kaha te tepu huri.
2. Activate Bluetooth pairing mode on your external device (e.g., smartphone, tablet).
3. Rapua "Crosley C200" in your device's Bluetooth settings and select it to pair.
4. Once paired, audio from your device will play through the turntable's connected speakers/ampkaikawe

Tuhipoka: The Bluetooth feature is for receiving audio ki the turntable, not for transmitting audio mai the turntable to Bluetooth speakers.

Te tiaki

1. Te horoi i te Stylus

• Use a soft brush designed for stylus cleaning.
• Brush gently from back to front (in the direction of the stylus's movement across the record).
• Do not brush from side to side, as this can damage the stylus.

2. Te horoi i te Ripanga Takahuri

• Wipe the dust cover and turntable cabinet with a soft, dry cloth.
• A ape i te whakamahi i nga matū kino, i nga horoi horoi ranei.

3. Replacing the Stylus

The stylus should be replaced after approximately 300-500 hours of playback. Refer to the Audio-Technica cartridge manual for specific replacement instructions or consult a qualified technician.

Raparongoā

Whakatakotoranga

• Tauira: C200A-BK
• Waitohu: Crosley
• Momo Puku: Puku Tika
• Motini: Te taipana teitei
• Nga tere: 33 1/3, 45 RPM
• Mahi: Tino A-ringa
• Tone Arm: Balanced S-Shaped with hydraulic lift control, anti-skate, height adjustment, and lockable rest
• Kaata: Audio-Technica Magnetic Cartridge
• mua-ampKaiwhakaora: Built-in switchable phono pre-ampkaikawe
• Putanga: Detachable RCA output cables
• Pereti: Damped die-cast aluminum with felt slip mat
• Āhuahira Motuhake: Kaiwhiwhi Nihokikorangi Hanga-i roto
• Rauemi: Aluminum (platter), Black finish
• Rahi Hua: 11.02 x 17.72 x 5.47 inihi
• Taumaha Tūemi: 11.02 pauna
• Ngā Pūrere Hototahi: Kaikōrero, Ampkaiwhakarewa, Kaiwhiwhi AV

Pūtāhui me te Tautoko

For warranty information, please refer to the documentation included with your purchase or visit the official Crosley website. For technical support or service inquiries, please contact Crosley customer service.

Kaihanga: Crosley

Te Ra Tuatahi Wātea: Hakihea 22, 2015

Ataata Hua Whaimana