1. Kupu Whakataki
This user manual provides detailed instructions for the installation, operation, and maintenance of your Flomasta Bottom Inlet Brass Shank Fill Valve ½" for Toilet Cistern. Please read this manual thoroughly before installation and keep it for future reference. Proper installation and maintenance will ensure optimal performance and longevity of the product.
2. Nga korero haumaru
Always turn off the main water supply before beginning any installation or maintenance work on your toilet cistern. Wear appropriate personal protective equipment, such as gloves and eye protection, if necessary. If you are unsure about any step, consult a qualified plumber.
- Ensure water supply is completely shut off before installation.
- Do not overtighten connections, as this may damage the valve or plumbing.
- Tiakina nga waahanga iti mai i nga tamariki.
3. Hua Neke Atuview
The Flomasta Bottom Inlet Brass Shank Fill Valve is designed for use in toilet cisterns, providing efficient and reliable water refilling. It features a durable brass shank for secure connection and adjustable height settings to accommodate various cistern sizes.
Figure 1: Flomasta Bottom Inlet Brass Shank Fill Valve. This image shows the complete fill valve assembly, featuring the main white body, the grey float mechanism, and the brass threaded shank at the bottom for connection to the water supply.
Āhuatanga matua:
- Brass shank bottom entry fill valve.
- Adjustable installation height: 203-323mm.
- Adjustable water work-line height: 125-260mm.
- Designed for toilet cistern applications.
4. Tatūnga me te Tāuta
Follow these steps for proper installation of the fill valve:
- Whakawetohia te Wai: Locate the main water shut-off valve for your toilet or the entire house and turn it off. Flush the toilet to empty the cistern.
- Tangohia te Takirere Whakakī Tawhito: Disconnect the water supply line from the bottom of the old fill valve. Unscrew the retaining nut from underneath the cistern and remove the old valve.
- Whakaritea te Takirere Whakakī Hou: Ensure the rubber washer is correctly seated on the brass shank of the new Flomasta fill valve.
- Insert New Fill Valve: Insert the brass shank of the new fill valve through the hole at the bottom of the toilet cistern.
- Takiuru Haumaru: From underneath the cistern, thread the retaining nut onto the brass shank and tighten it by hand. Use a wrench for a final quarter turn, being careful not to overtighten.
- Whakarite Teitei: The valve's installation height is adjustable from 203mm to 323mm. To adjust, twist the float mechanism to unlock, slide the upper part of the valve to the desired height, and then twist to lock it in place.
- Tūhono Tuku Wai: Reconnect the water supply line to the brass shank of the new fill valve. Ensure a tight, leak-free connection.
- Whakakāhia te Pūnaha Wai: Slowly turn the main water supply back on and check for any leaks around the connections.
5. Nga Tohutohu Whakahaere
Once installed, the Flomasta fill valve operates automatically to refill the toilet cistern after each flush. The water level is controlled by the float mechanism.
Adjusting Water Level:
The water work-line adjustable height is between 125mm and 260mm. To adjust the water level in the cistern:
- Locate the float mechanism on the side of the fill valve.
- Gently twist the float mechanism to unlock its position.
- Slide the float up or down to achieve the desired water level. Moving the float up will increase the water level, and moving it down will decrease it.
- Once the desired level is set, twist the float mechanism back to lock it securely in place.
- Flush the toilet to test the new water level. Make further adjustments if necessary.
6. Tiaki
Regular maintenance can help prolong the life of your fill valve and prevent common issues.
- Te horoi: Periodically inspect the valve for mineral deposits or debris, especially if you have hard water. Turn off the water supply, remove the valve, and gently clean any affected parts with a soft brush and mild descaling solution. Rinse thoroughly before reinstallation.
- Takitaki turuturu: Regularly check for any signs of leaks around the valve connections or within the cistern. Address any leaks promptly to prevent water waste and potential damage.
- Float Operation: Ensure the float moves freely without obstruction. Any sticking or obstruction can lead to incorrect water levels or continuous filling.
7. Te Raru
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Cistern not filling or filling slowly | Water supply off; clogged inlet; faulty valve mechanism. | Check water supply; clean inlet filter; inspect valve for debris or damage. |
| Cistern continuously filling/overflowing | Float set too high; float obstructed; faulty seal. | Adjust float level; clear obstructions; inspect and replace seals if worn. |
| Leaks around valve base | Loose retaining nut; damaged washer. | Tighten retaining nut (do not overtighten); replace rubber washer. |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact a qualified plumber or Flomasta customer support.
8. Whakatakotoranga
- Momo Hua: Bottom Inlet Brass Shank Fill Valve
- Waitohu: Flomasta
- Tau tauira: 5317810081422
- Rauemi: Brass (shank), Plastic (body)
- Rahi Hononga Whakauru: ½ inch
- Momo Hononga Whakauru: Raro
- Adjustable Installation Height: 203mm - 323mm
- Adjustable Water Work-line Height: 125mm - 260mm
- Taumaha Tūemi: 390 g
- Ahu mōkihi: 26.9 x 11.2 x 6.9 cm
9. Pūtāhui me te Tautoko
For warranty information or technical support, please refer to the original product packaging or contact Flomasta customer service directly. Keep your proof of purchase for any warranty claims.
Note: Warranty terms may vary based on region and retailer.
