Midiplus Studio M USB Audio Interface Instruction Manual

1. Hua Neke Atuview

The Midiplus Studio M is a compact and high-performance USB audio interface designed for studio recording. It features one input and two outputs, supporting high-quality microphone input and 24-bit/192kHz high-precision sampling. The device is powered via PC USB and includes 48V phantom power for condenser microphones. Its small, exquisite design is compatible with both Mac and Windows operating systems, making it a versatile tool for musicians and producers.

Whakaahua 1: Mua me muri view of the Midiplus Studio M USB Audio Interface.

2. Aratohu Tatūnga

2.1 Ihirangi mokete

• Midiplus Studio M USB Audio Interface
• Tauira USB
• Pukapuka a te Kaipupuri (tenei tuhinga)
• Kaari Kaari

2.2 Whakaritenga Pūnaha

• Pūnaha Mahi: Windows, macOS
• Compatible Devices: Personal Computer with USB port

2.3 Te hono i te Pūrere

1. Connect the Midiplus Studio M to your computer using the provided USB cable. The device is USB-powered.
2. Ensure your operating system (Windows or macOS) recognizes the device. Drivers may be required for optimal performance; refer to the Midiplus webpae mo nga tango taraiwa hou.
3. Connect your microphone or instrument to the Input (MIC/Line/Hi-z) interface on the front panel.
4. Connect your headphones to the headphone interface on the front panel, or your studio monitors to the Output interface (Left/Right) on the rear panel.

Figure 2: Midiplus Studio M connected to a computer, showing input and output cables.

3. Nga Tohutohu Whakahaere

3.1 Mana Paewhiri Mua

• Input Gain Control Knob: Ka whakarerekē i te taumata tāuru mō te hopuoro, te taonga puoro rānei e hono ana.
• Switch (Mic/Instrument) Button: Toggles between microphone and instrument input modes.
• 48V Phantom Power ON/OFF: Activates or deactivates 48V phantom power for condenser microphones.
• Headphone Volume Control Button: Adjusts the output volume for connected headphones.
• Output Volume Control Button: Adjusts the main output volume for connected studio monitors.

Figure 3: Midiplus Studio M in a studio setup, demonstrating its compact size and integration.

3.2 Hononga Paewhiri Whakamuri

• Atanga USB: USB2.0 port for connection to your computer and power supply.
• Output Interface (Left/Right): Connects to your studio monitors or other output devices.
• Extensible Device Interface: Provides additional connectivity options for other devices.

4. Tiaki

• Puritia te pūrere kia ma mā te muru ki te kakahu ngohengohe, maroke. Āta karohia te whakamahi i ngā matū kaha, i ngā rauemi whakakoi rānei.
• Me whakarite kia mau te hononga o ngā taura katoa hei ārai i te ngaronga, te pakaru rānei o te tohu.
• Whakaorangia te atanga ki te waahi makariri, maroke atu i te ra tika me te wera nui.
• A ape i te whakatakoto i nga mea taumaha ki runga ake o te waahanga.

5. Te Raru

5.1 Kaore he Putanga oro

• Check all cable connections (USB, input, output, headphones).
• Ensure the device is powered on and recognized by your computer.
• Verify that the output volume controls (headphone and main output) are turned up.
• Check your computer's sound settings to ensure the Midiplus Studio M is selected as the output device.

5.2 Input Signal Issues

• Adjust the Input Gain Control Knob.
• Ensure the correct input mode (Mic/Instrument) is selected.
• If using a condenser microphone, verify that 48V Phantom Power is enabled.
• Check the microphone/instrument cable for damage.

5.3 Device Not Recognized by Computer

• Ngana ki te hono i te taura USB ki tetahi tauranga USB rereke i runga i to rorohiko.
• Tīmataria anō tō rorohiko.
• Ensure the latest drivers for the Midiplus Studio M are installed from the official Midiplus webpae.
• Whakamatautau ki te taura USB rereke mena ka waatea.

6. Whakatakotoranga Hangarau

7. Pūtāhui me te Tautoko

For warranty information and technical support, please refer to the official Midiplus website or contact your local dealer. Keep your purchase receipt as proof of purchase for any warranty claims.