Adcraft USFZ-1D/19 Commercial Freezer User Manual

1. Kupu Whakataki

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Adcraft USFZ-1D/19 19-Cubic Feet 1-Section Commercial Freezer. Please read this manual thoroughly before installation and operation to ensure proper use and to prevent damage to the unit or injury to personnel. Keep this manual for future reference.

Whakaahua 1: Mua view of the Adcraft USFZ-1D/19 19-Cubic Feet 1-Section Commercial Freezer. This image shows the stainless steel exterior, the single door with a recessed handle, and the bottom-mounted refrigeration unit with louvered vents. The unit is equipped with casters for mobility.

2. Nga korero haumaru

Always follow basic safety precautions when using this appliance to reduce the risk of fire, electrical shock, or injury.

• Haumaru Hiko: Me whakarite kei te hono te waeine ki tētahi putanga hiko whenua me te voltage tikatage (115V/60Hz/1-ph) and amptau (8.28 amps). Do not use extension cords.
• Whakahau: Maintain adequate clearance around the unit for proper air circulation, especially around the bottom-mounted refrigeration system. Blocked vents can lead to overheating and reduced efficiency.
• Rauemi mura: Kaua e rongoatia ngā matū pahū, ngā mea mura rānei ki roto, ki te taha rānei o te pouaka tio.
• Te horoi: Disconnect power before cleaning or performing any maintenance. Use non-abrasive cleaners.
• Nuku: Use caution when moving the unit, especially on uneven surfaces. Ensure casters are locked once in position.
• Ratonga Whakamana: All repairs and servicing should be performed by qualified service personnel.

3. Tatūnga me te Tāuta

3.1 Te Wetewete

Carefully remove all packaging materials. Inspect the freezer for any shipping damage. Report any damage immediately to the carrier and your dealer. Retain packaging materials for inspection.

3.2 Whakanoho

• Place the unit on a strong, level surface capable of supporting its weight when fully loaded.
• Ensure adequate clearance (at least 6 inches) around the back and sides for proper ventilation and heat dissipation. Avoid placing the unit near heat sources or in direct sunlight.
• Lock the two front casters to prevent accidental movement.

3.3 Hononga Hiko

Before connecting the unit, ensure the power supply matches the specifications on the unit's data plate (115V/60Hz/1-ph, 8.28 Amps). The freezer is equipped with a 7' cord and a NEMA 5-15P plug. Plug the unit directly into a dedicated, grounded electrical outlet.

3.4 Whakaohoatanga Tuatahi

After placement and electrical connection, allow the unit to stand for at least 2 hours before plugging it in. This allows refrigerants and oils to settle. Once plugged in, the unit will begin to cool. Allow it to reach the desired operating temperature before loading with products.

4. Mahi

4.1 Te Mana Pawera

The Adcraft USFZ-1D/19 features a front digital temperature controller with an LED display.

• The LED display shows the current internal temperature.
• Refer to the specific controller manual (if provided separately) for detailed instructions on adjusting temperature settings. Generally, buttons allow for increasing whakatau raneiasing the set point.

4.2 Te Uta i te Whakatio

• Do not overload the shelves. Ensure air can circulate freely around products for efficient cooling.
• The unit comes with (3) removable plastic-coated wire shelves. These can be adjusted to accommodate various product sizes.
• Minimize door openings to maintain stable internal temperatures and conserve energy.

4.3 Te Whakarewa Aunoa

This freezer is equipped with an automatic defrosting system. This system periodically melts accumulated frost from the evaporator coil, which then drains away. No manual defrosting is typically required under normal operating conditions.

5. Tiaki

Regular maintenance ensures optimal performance and extends the lifespan of your freezer. Always disconnect power before cleaning or servicing.

5.1 Te horoi o roto

• Tangohia ngā hua me ngā whata katoa.
• Clean the interior with a mild soap and warm water solution. Rinse thoroughly with clean water and dry with a soft cloth.
• Do not use abrasive cleaners, steel wool, or harsh chemicals, as these can damage the painted aluminum interior liner.

5.2 Te horoi i waho

• Wipe down the 430 stainless steel exterior with a clean cloth and a mild stainless steel cleaner or soap and water.
• Always wipe in the direction of the grain to prevent scratching.

5.3 Whakapai i te Coil Condenser

The condenser coil, located in the bottom-mounted refrigeration unit, should be cleaned regularly (monthly or quarterly, depending on environment) to ensure efficient operation.

• Momotuhia te hiko ki te waeine.
• The bottom-mounted cooling unit slides out for easier access.
• Use a stiff brush or vacuum cleaner to remove dust and debris from the condenser fins.
• Ensure the area around the condenser is clear of obstructions.

5.4 Te Whakapaipai i te Puka o te Kuaha

Inspect the removable door gasket regularly for cracks or tears. Clean the gasket with warm water and mild soap. A clean, intact gasket ensures a proper seal, preventing cold air loss and ice buildup. Replace damaged gaskets promptly.

6. Te Raru

Before calling for service, please check the following common issues and solutions:

Mena ka mau tonu te raruraru i muri i te tirotiro i ēnei āhuatanga, whakapā atu ki tētahi tohunga ratonga whai tohu.

7. Whakatakotoranga

8. Pūtāhui me te Tautoko

For information regarding warranty coverage and terms, please refer to the warranty card included with your product or visit the official Adcraft webpae.

For technical support, parts, or service inquiries, please contact Adcraft customer service or your authorized dealer. Ensure you have your model number (USFZ-1D/19) and serial number ready when contacting support.

Adcraft Contact Information:
Please refer to the contact details provided on the Adcraft official webpae, to tuhinga hoko ranei.