Adcraft USRFS-2D/B U-Star 2-Door 45-Cubic Feet Refrigerator Merchandiser

1. Hua Neke Atuview

The Adcraft USRFS-2D/B U-Star Refrigerator Merchandiser is a commercial-grade, two-section refrigeration unit designed for displaying and storing various products at optimal temperatures. It features a spacious 45.0 cubic feet capacity, anti-fogging self-closing sliding doors, and an illuminated interior for enhanced visibility.

• Awhe Pawera: Maintains temperatures between 32°F and 41°F.
• Wewete: Foamed-in-place polyurethane high-density cell insulation for efficient temperature retention.
• Tirohanga: Bright interior lights and a front-mounted LED temperature display.
• Whata: Includes 8 adjustable plastic-coated steel shelves.
• Tiaki: Features removable door gaskets for easy cleaning and automatic defrosting.

Whakaahua 1: Mua view of the Adcraft USRFS-2D/B U-Star 2-Door Refrigerator Merchandiser. This image shows the black exterior, two glass sliding doors, and the illuminated interior with multiple white shelves. The top panel features the "XINGX" brand logo.

2. Nga korero haumaru

Please read all safety instructions carefully before operating the merchandiser to prevent injury or damage to the unit. Keep this manual for future reference.

• Haumaru Hiko: Ensure the unit is connected to a grounded 115V/60Hz/1-ph power supply with a dedicated circuit. Do not use extension cords.
• Whakahau: Maintain adequate clearance around the unit for proper air circulation to prevent overheating. Refer to the setup section for specific clearances.
• Te whakahaere: The unit is heavy (532 lbs). Use appropriate lifting equipment and personnel when moving. Avoid tilting the unit excessively.
• Rauemi mura: Do not store flammable or explosive materials inside or near the merchandiser.
• Te horoi: Disconnect power before cleaning. Use non-abrasive cleaners.
• Tamariki: Keep children away from the unit. Ensure doors cannot be accidentally closed on children.

3. Tatūnga me te Tāuta

1. Wewete ana: Carefully remove all packaging materials, including protective films and tapes. Inspect the unit for any shipping damage. Report any damage to the carrier immediately.
2. Turanga:
   • Place the merchandiser on a strong, level surface capable of supporting its weight (532 lbs empty, plus contents).
   • Ensure adequate ventilation. Maintain a minimum clearance of 4 inches (10 cm) from walls or other obstructions on the sides and rear, and 12 inches (30 cm) above the unit for proper airflow to the condenser.
   • Avoid direct sunlight or heat sources, as this can affect cooling efficiency.
3. Whakataumata: Use a spirit level to ensure the unit is perfectly level. Adjust the leveling feet at the bottom of the unit as needed. Proper leveling is crucial for door alignment and drainage.
4. Hononga Hiko:
   • Connect the 7-foot power cord with NEMA 5-15P plug to a dedicated 115V/60Hz/1-ph grounded electrical outlet.
   • The unit draws 9.2 amps and requires a 1/2 HP compressor. Ensure the circuit can handle this load.
   • Kaua e whakamahi i nga mono urutau me nga taura toronga.
5. Tāutanga Papa:
   • Install the 8 adjustable plastic-coated steel shelves into the desired positions using the shelf clips provided. Ensure shelves are securely seated.
6. Te horoi tuatahi: Before first use, clean the interior and exterior of the unit with a mild soap and water solution. Wipe dry thoroughly.
7. Whakaoho Tuatahi: After connecting power, allow the unit to run empty for at least 2-4 hours to reach its operating temperature before loading products.

4. Nga Tohutohu Whakahaere

This section provides guidance on the daily operation of your Adcraft Refrigerator Merchandiser.

• Mana Pawera:
  • The unit is designed to maintain temperatures between 32°F and 41°F (0°C and 5°C).
  • The front-mounted LED temperature display shows the current internal temperature.
  • Consult the control panel instructions (if applicable, typically located near the display) for adjusting temperature settings.
• Loading Products:
  • Load products evenly on the shelves. Do not block the internal air vents, as this can impede airflow and cooling efficiency.
  • Kaua e whakakī i ngā whata ki runga ake i tōna taumaha.
• Kuaha retireti:
  • The merchandiser features anti-fogging self-closing sliding doors. Ensure doors close completely after each use to maintain internal temperature and energy efficiency.
  • Keep door tracks clean to ensure smooth operation.
• Rama o roto:
  • The illuminated interior lights enhance product visibility. These lights typically operate automatically when the unit is powered or can be controlled via a switch (refer to unit's specific controls).
• Whakarewa Aunoa:
  • The unit is equipped with an automatic defrosting system. This system periodically melts accumulated frost from the evaporator coil, which then drains away.
  • During defrost cycles, the internal temperature may temporarily rise slightly, which is normal.

5. Tiaki

Regular maintenance ensures optimal performance and extends the lifespan of your merchandiser. Always disconnect power before performing any maintenance.

• Whakapai ia rā:
  • Wipe down the interior and exterior surfaces with a soft cloth and mild, non-abrasive cleaner.
  • Clean the glass doors with a glass cleaner to maintain visibility.
• Removable Door Gaskets:
  • The door gaskets are removable for easy cleaning. Periodically remove and clean them with warm, soapy water.
  • Ensure gaskets are dry before re-installing to prevent mold growth and maintain a tight seal.
  • Inspect gaskets for cracks or tears and replace if damaged to prevent air leaks.
• Condenser Coil Cleaning (Monthly/Quarterly):
  • The condenser coil, located at the bottom of the unit, can accumulate dust and debris, reducing efficiency.
  • Using a brush or vacuum cleaner, carefully clean the condenser fins. Do not bend the fins.
  • Regular cleaning of the condenser coil is critical for energy efficiency and preventing compressor failure.
• Drain Pan Cleaning:
  • Check and clean the drain pan (located near the condenser) periodically to prevent blockages and odors.
• Shelf Care:
  • Clean the plastic-coated steel shelves with mild soap and water.
  • Ensure shelves are dry before placing them back into the unit.

6. Te Raru

I mua i te whakapā atu ki te ratonga, review nga take noa e whai ake nei me o raatau otinga ka taea.

For issues not listed above or if solutions do not resolve the problem, please contact a qualified service technician or Adcraft customer support.

7. Whakatakotoranga

8. Pūtāhui me te Tautoko Kiritaki

For specific warranty details, please refer to the warranty card included with your product or contact Adcraft directly. Warranty terms may vary based on purchase date and region.

If you require technical assistance, replacement parts, or have questions regarding the operation or maintenance of your Adcraft USRFS-2D/B Refrigerator Merchandiser, please contact Adcraft customer support. Contact information can typically be found on the manufacturer's official webpae, i runga ranei i to tuhinga hoko.

Adcraft Official Webpae: www.adcraft.com