Kupu Whakataki
Thank you for choosing the Adcraft USSL-2D U-Star 2-Door Salad/Sandwich Refrigerated Prep Table. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new commercial refrigeration unit. Please read this manual thoroughly before installation and operation, and retain it for future reference.
Image: Adcraft USSL-2D U-Star 2-Door Salad/Sandwich Refrigerated Prep Table, showcasing its stainless steel exterior, two doors, and top prep area with an insulated lid.
Nga Tohutohu Haumaru
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electrical shock, or injury.
- Haumaru Hiko: Ensure the unit is connected to a properly grounded 115V/60Hz/1-ph power supply with a dedicated circuit. Do not use extension cords.
- Turanga: Position the unit on a level, stable surface. Allow adequate clearance around the unit for proper ventilation (minimum 6 inches from walls).
- Te whakahaere: The unit is heavy (357 lbs). Use appropriate lifting equipment and personnel when moving or installing.
- Te horoi: Disconnect power before cleaning. Use mild, non-abrasive cleaners.
- Tiaki: Ko nga kaimahi ratonga whai tohu anake me mahi whakatikatika.
- Whakahau: Do not block air vents or condenser coils.
- Haumaru Kai: Maintain proper temperatures to ensure food safety.
Tatūnga
- Wewete ana: Carefully remove all packaging materials. Inspect the unit for any shipping damage. Report any damage to the carrier immediately.
- Tāutanga Caster: The unit comes with (4) 6-inch casters (2 locking and 2 non-locking). Attach the casters to the bottom of the unit, ensuring the locking casters are positioned at the front for stability.
- Turanga: Move the unit to its desired location. Ensure the floor is level and strong enough to support the unit's weight. Maintain at least 6 inches of clearance from walls and other equipment for proper airflow.
- Hononga Hiko: Plug the unit into a dedicated 115V/60Hz/1-ph electrical outlet. The unit requires a NEMA 5-15P plug.
- Cutting Board & Food Pans: Place the 3/4-inch thick removable polyethylene cutting board on the top prep area. Insert the (12) 1/6 pans into the designated slots.
- Whakaoho Tuatahi: Allow the unit to sit for at least 2 hours after moving before plugging it in to allow refrigerants to settle.
Nga Tohutohu Whakahaere
Pūmana Mamati Mamati
The unit is equipped with a precise digital temperature controller with an LED display for easy monitoring and adjustment.
- Hiko Whakaka/Weto: Press the power button (usually marked with a circle and vertical line) to turn the unit on or off.
- Whakaaturanga Temperature: The LED display shows the current internal temperature.
- Tautuhi i te Mamahana: Refer to the controller's specific instructions (often a "SET" button) to adjust the desired temperature. Allow several hours for the unit to reach the set temperature after initial startup or adjustment.
- Whakarewa Aunoa: The unit features automatic defrosting, which periodically clears ice buildup from the evaporator coil. During defrost cycles, the temperature display may temporarily rise.
Food Preparation Area
- Insulated Hinged Lid: Keep the insulated hinged lid closed when not actively preparing food to maintain optimal temperatures in the food pans and conserve energy.
- Food Pans: Utilize the provided 1/6 pans for ingredients. Ensure pans are properly seated to allow for efficient cooling.
- Papa tapahi: The removable polyethylene cutting board provides a convenient and sanitary surface for food preparation.
Te tiaki
Regular maintenance ensures optimal performance and extends the lifespan of your prep table.
- Whakapai ia rā:
- Wipe down all stainless steel surfaces with a soft cloth and mild, non-abrasive cleaner.
- Clean the removable polyethylene cutting board thoroughly after each use.
- Clean the interior of the cabinet and shelves with a mild soap and water solution.
- Tiaki Puke Kuha: Regularly inspect door gaskets for tears or damage. Clean gaskets with warm, soapy water to maintain a tight seal. Replace damaged gaskets promptly.
- Condenser Coil Cleaning (Monthly/Quarterly):
The condenser coil, located at the rear, can accumulate dust and debris, reducing efficiency. Disconnect power before cleaning. Use a stiff brush or vacuum cleaner to remove dirt from the coil fins. For stubborn buildup, professional cleaning may be required.
- Panuku Waiwai: Periodically check and clean the drain pan to prevent blockages and odors.
Raparongoā
I mua i te waea atu ki te ratonga, tirohia ngā raruraru noa e whai ake nei:
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Ko te waeine kaore i te whakamatao | Power supply issue, thermostat setting, dirty condenser coil, door left open. | Check power connection and circuit breaker. Adjust thermostat. Clean condenser coil. Ensure doors are closed properly. |
| Haruru nui | Loose components, fan motor issue, unit not level. | Check for loose parts. Ensure unit is level. If noise persists, contact service. |
| Te wai i runga i te papa | Clogged drain line, excessive humidity, door gasket issue. | Clear drain line. Ensure doors are sealed. Reduce humidity if possible. |
Mena kāore ngā mahi rapurongoā e whakatau i te raruraru, whakapā atu ki tētahi tohunga ratonga whai tohu.
Whakatakotoranga
| Āhuahira | Taipitopito |
|---|---|
| Tau tauira | USSL-2D |
| Ahu (W x D x H) | 47-3/4" wide (approx. 52"D x 47"H overall) |
| Te kaha | 12.0 cu. ft. |
| Nga tatau | 2 |
| Whata | (2) plastic coated wire shelves |
| Papa tapahi | 3/4" thick removable polyethylene |
| Food Pans Included | (12) 1/6 pans |
| Whakamaoho | Self-contained, rear mounted |
| Hiko | 115v/60/1-ph, 7.8 amps, 1/3 HP |
| Momo Mono | NEMA 5-15P |
| Ko nga Kaipara | (4) 6" casters (2 locking, 2 non-locking) |
| Rauemi o waho | 430 kowiri tira |
| Rauemi o roto | 304 kowiri tira |
| Taumaha | 357 Pauna |
Pūtāhui me te Tautoko
Adcraft products are manufactured to high standards and are designed for commercial use. For specific warranty details, please refer to the warranty card included with your product or visit the official Adcraft webpae. Puritia to rihiti hoko mo nga kereme whakamana.
For technical assistance, parts, or service inquiries, please contact Adcraft Customer Support. You can often find contact information on the manufacturer's webpae, ma to kaihoko whaimana ranei.
Note: Unauthorized service or modifications may void the warranty.
