Pukapuka Kaiwhakamahi mō te Matawai Paekōti HP CipherLab 1500P

1. Kupu Whakataki

This user manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your CipherLab 1500P HP 1D Corded Barcode Scanner. Please read this manual thoroughly before using the device to ensure proper functionality and to maximize its lifespan. Keep this manual for future reference.

2. Hua Neke Atuview

The CipherLab 1500P HP is a high-performance 1D corded barcode scanner designed for efficient data capture. It comes with a USB cable for connectivity and an autosense stand for hands-free operation.

Whakaahua 2.1: CipherLab 1500P HP barcode scanner placed in its autosense stand. The scanner is black with a yellow trigger button, and the stand is also black, providing a stable base for the scanner.

Ihirangi mōkī:

• CipherLab 1500P HP Barcode Scanner
• Taura Hononga USB
• Autosense Stand
• This User Manual (or link to digital version)

3. Tatūnga

1. Wewetehia te Pūrere: Carefully remove the barcode scanner, USB cable, and autosense stand from their packaging.
2. Honoa te Taura USB:
   • Locate the USB port on the base of the barcode scanner.
   • Insert the smaller end of the USB cable into the scanner's port.
   • Insert the larger USB-A end of the cable into an available USB port on your host computer or point-of-sale (POS) system.
3. Tāutanga Atekōkiri (Mono & Tākaro): The CipherLab 1500P HP is typically a plug-and-play device. Your operating system should automatically detect and install the necessary drivers. Wait for the installation to complete (usually indicated by a notification).
4. Position the Autosense Stand: Place the autosense stand on a stable, flat surface. The stand is designed to hold the scanner in an optimal position for hands-free scanning.
5. Place Scanner in Stand: Gently place the barcode scanner into the autosense stand. Ensure it is securely seated. The scanner will automatically switch to presentation mode when placed in the stand, allowing it to detect and scan barcodes without pressing the trigger.
6. Whakamatau Hononga: Open a text editor (e.g., Notepad, WordPad) or a compatible application on your computer. Scan a known barcode. The scanned data should appear in the text editor, confirming successful setup.

4. Nga Tohutohu Whakahaere

Aratau Pupuri:

• Remove the scanner from the autosense stand.
• Ātaina te matapihi matawai ki te waehere pae e hiahia ana koe ki te matawai.
• Press and hold the yellow trigger button. A red scanning line will emit from the scanner.
• Position the scanner so the red line crosses the entire barcode.
• Once the barcode is successfully read, the scanner will emit an audible beep and/or a visual indicator (e.g., LED flash). The data will be transmitted to your connected device.
• Tukua te paatene keu.

Autosense (Presentation) Mode:

• Ensure the scanner is securely placed in the autosense stand.
• Hold the barcode in front of the scanner's window.
• The scanner will automatically detect the barcode and activate its scanning engine.
• Once the barcode is successfully read, the scanner will emit an audible beep and/or a visual indicator. The data will be transmitted to your connected device.

Ngā Tohutohu Matawai:

• Ensure the barcode is clean and not damaged.
• Whakatikatikahia te tawhiti i waenga i te matawai me te waehere pae kia tino pai ai te pānui.
• Avoid scanning at extreme angles; try to keep the scanner perpendicular to the barcode.
• For reflective surfaces, try tilting the scanner slightly to avoid glare.

5. Tiaki

• Te horoi:
  • Regularly clean the scanning window with a soft, lint-free cloth.
  • Mo te paru maro, paku dampen the cloth with water or a mild, non-abrasive cleaner. Do not spray cleaner directly onto the scanner.
  • Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the scanner's surface or internal components.
• Rokiroki: Penapenahia te matawai ki te wāhi hauhautanga, maroke, kia matara atu i te rā tika me ngā pāmahana tino kino.
• Tiaki taura: Avoid bending or twisting the USB cable excessively, as this can damage the internal wires.
• Tiaki Tu: Keep the autosense stand clean and free of obstructions to ensure the scanner can be placed and removed smoothly.

6. Te Raru

7. Whakatakotoranga

8. Pūtāhui me te Tautoko

For specific warranty information regarding your CipherLab 1500P HP barcode scanner, please refer to the warranty card included with your product or contact your point of purchase. Warranty terms may vary by region and reseller.

For technical support, driver downloads, or additional product documentation, please visit the official CipherLab website or contact their customer support directly. You may need your product model number (33-A1500PCBKU001) and serial number for support inquiries.

CipherLab Official Webpae: www.cipherlab.com