AIBOO Linkable Under Cabinet LED Lighting System User Manual

1. Kupu Whakataki

This manual provides comprehensive instructions for the installation, operation, and maintenance of your AIBOO Linkable Under Cabinet LED Lighting System. This system features hardwired 12V slim aluminum dimmable puck lights with a wireless controller, designed for ambiance lighting in various indoor settings. Please read this manual thoroughly before installation and use.

2. Nga Korero Haumaru Nui

• Haumaru Hiko: This product is designed for 110V/120Vac input and requires hardwiring. Installation should be performed by a qualified electrician or an individual with intermediate knowledge of electrical wiring to prevent electric shock or fire hazards. Ensure power is disconnected at the circuit breaker before any installation or maintenance.
• Kāore he Mono Pakitara: This system does NOT include a wall plug power adapter. It is intended for direct wiring into your electrical system.
• Whakamahi Roto anake: This lighting system is designed for indoor use in dry locations. Do not expose to moisture or water.
• Whakahau: Ensure adequate ventilation around the LED driver to prevent overheating.
• Hototahi Wae: Use only the components provided or specified by AIBOO. Using incompatible parts may damage the system or pose a safety risk.

3. Ihirangi mokete

Manatokohia ko nga mea katoa kei raro nei kei roto i to kete:

• LED Puck Lights (6 units)
• RF Wireless Remote Control (1 unit)
• LED Controller (1 unit)
• 12V 1A Hardwired LED Driver (Power Adapter) (1 unit)
• 5ft Extension Cords (2 units)
• 6-Way Splitter (1 unit)
• Mounting Stickers (12 units)
• Ngā tīwiri whakamau (12 ngā waeine)

4. Whakatakotoranga Hua

5. Tatūnga me te Tāuta

Before beginning installation, ensure the main power supply to the installation area is turned off at the circuit breaker.

5.1 Kauwhata Waeaview

5.2 Hardwired Power Adapter Connection

The system includes a hardwired power adapter (LED Driver) designed to connect directly to a 110V/120Vac circuit. This adapter converts AC power to 12V DC for the LED lights. A wall plug is not included.

1. Whakawetohia te hiko i te wehenga ara iahiko matua.
2. Connect the input wires of the LED driver to your 110V/120Vac circuit wiring. Ensure proper polarity (live to live, neutral to neutral, ground to ground) according to local electrical codes.
3. Secure all connections with appropriate wire connectors.

5.3 Connecting the Puck Lights

The puck lights can be connected in two primary configurations: Series Connection or Parallel Connection.

5.3.1 Hononga Rangatū

In a series connection, the puck lights are linked one after another. This method is suitable for linear installations where lights are spaced evenly in a line.

1. Connect the LED controller to the output of the hardwired LED driver.
2. Connect the first puck light to the LED controller.
3. Connect the subsequent puck lights to each other using their integrated cables.
4. Use extension cords if additional length is required between lights.

5.3.2 Hononga Whakarara

For installations requiring lights to branch out from a central point, the 6-way splitter allows for parallel connection.

1. Connect the LED controller to the output of the hardwired LED driver.
2. Connect the 6-way splitter to the LED controller.
3. Connect individual puck lights to the available ports on the 6-way splitter.
4. Use extension cords if additional length is required for individual lights.

5.4 Mounting the Puck Lights

The puck lights can be mounted using either the provided screws or adhesive stickers.

1. Whakaritenga Mata: Me whakarite kia ma, kia maroke, kia maeneene hoki te mata o te whakairinga.
2. Whakapiri Whakapiri: Peel the backing from the adhesive sticker and firmly press the puck light onto the desired surface. Hold for 30 seconds to ensure a strong bond.
3. Whakauu Tiu: Use the provided screws to secure the puck lights to the surface. Pre-drilling pilot holes may be necessary depending on the material.

6. Nga Tohutohu Whakahaere

The AIBOO LED Lighting System is controlled by an RF wireless remote control.

6.1 Nga Mahi Mana Mamao

• KIA/WATA: Pehia te ON button to turn the lights on, and the WATE button to turn them off.
• Whakaritenga Tirohanga:
  • Perehi LIGHT + or LIGHT - to gradually increase or decrease brightness (stepless dimming).
  • Whakamahia te 100%, 50%, 25% nga paatene mo nga tatūkē wherikotanga tere.
• Takirua: To pair the remote with the controller, press the takirua button within 5 seconds of powering on the lights until the lights flicker.
• Decoding (1 to More Pair): To pair one remote with multiple controllers, press the Wetewaehere button within 5 seconds of powering on the lights until the lights flicker.
• Ngā Mahi Whakatakotoranga Wā: Perehi 1H, 2H, 4H, ranei 8H to set the lights to automatically turn off after 1, 2, 4, or 8 hours, respectively.

7. Tiaki

The AIBOO LED Lighting System requires minimal maintenance.

• Te horoi: Ensure the lights are off and cool before cleaning. Wipe the puck lights and controller with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Tirotiro: Periodically check all connections for tightness and inspect cables for any signs of damage.
• Whakakapinga Pūhiko: The remote control requires 1 CR2 battery. Replace the battery when the remote's range decreases or it stops responding.

8. Te Raru

If you encounter issues with your AIBOO LED Lighting System, refer to the following common problems and solutions:

9. Nga Korero Whakaputanga

AIBOO products are manufactured to high-quality standards. For specific warranty details regarding your Linkable Under Cabinet LED Lighting System, please refer to the warranty card included with your purchase or visit the official AIBOO webpae. Puritia to riirii hoko hei tohu mo te hoko mo nga kereme whakamana.

10. Tautoko Kiritaki

For technical assistance, troubleshooting, or product inquiries, please contact AIBOO customer support.

• U.S. Live Customer Support: Monday - Friday, 9 AM - 5 PM (EST)
• Rauemi ipurangi: Tirohia te AIBOO Store on Amazon mo etahi atu korero hua me te tautoko.