Lithonia Lighting WF6 LED 30K MW M6 Recessed Wafer Downlight Instruction Manual

1. Hua Neke Atuview

The Lithonia Lighting Wafer-Thin LED recessed downlight with remote driver box offers high-quality light output and efficiency. Its innovative wafer-slim, Type IC design allows for easy installation in new construction or remodel projects from below the ceiling, eliminating the need for a traditional pot light housing.

This downlight is designed for versatility and can be installed in various indoor and outdoor residential, hospitality, commercial, and multifamily applications.

Figure 1: Lithonia Lighting WF6 LED Recessed Wafer Downlight

2. Nga korero haumaru

WHAKATŪPATO: Always turn off power at the main circuit breaker before beginning any electrical installation or maintenance. Failure to do so may result in serious injury or death.

• Wear appropriate personal protective equipment, including safety glasses, during installation.
• Me whakarite kia mau nga hononga hiko katoa me te whai ki nga waehere hiko o te rohe.
• This product is rated for 120V input voltage. Verify your power supply matches this requirement.
• The fixture is IC Rated, Wet Listed, and Air Tight, making it safe for contact with insulation and suitable for damp nga waahi maku ranei.

3. Ihirangi mokete

Manatokohia kei roto katoa nga waahanga ki to kete:

• LED Module (Downlight Fixture)
• Pouaka Atekōkiri Mamao
• Puka Tohutohu Whakauru
• Hole Template (for new ceiling cutouts)
• Wago Connectors (for electrical connections)

Figure 2: Remote Driver Box and LED Module

4. Aratohu Whakauru

This downlight requires only 2 inches of ceiling clearance for installation.

4.1. Prepare the Ceiling Hole

1. Ine me te Tohu: Double-check and measure the existing ceiling hole. If a new hole is required, use the provided hole template or a drill saw with the appropriate diameter (5.9 inches for the back hole size) to mark the center and cut the opening. Ensure the hole size allows the luminaire's outside trim to cover it while the spring clips secure the fixture.
2. Pull Wiring: Pull the electrical wire through the cut-out hole and cut to the needed length.

Figure 3: Ceiling Hole Preparation and Wiring

4.2. Connect the Remote Driver Box

3. Open Driver Box: Whakatuwheratia te uhi o te pouaka taraiwa mamao ka tango i tetahi o nga patoto i te pereti taha.
4. Hononga Waea: Locate the power supply leads from the remote driver box. Connect the black wire to the live wire, the white wire to the neutral wire, and the green wire to the ground wire using the provided Wago connectors. Ensure all connections are made securely inside the driver box.
5. Close Driver Box: Close the cover of the driver box.
6. Position Driver Box: Place the remote driver box through the cut-out hole and lay it on the ceiling above the drywall.

4.3. Install the LED Module

7. Hononga Kōwae: Connect the LED module to the remote driver box and tighten the nut connector.
8. Kōkuhu Kōwae: Pull the spring clips on the fixture up and through the ceiling hole. Place the module into the hole, ensuring the spring clips hold securely to the ceiling.

4.4. Nga Mahi Whakamutunga

9. Whakaora i te Mana: Turn on the electricity at the circuit breaker box.
10. Manatokohia te Mahi: Turn the power in the room back on and ensure the LED module illuminates.

4.5. Ataata Tāuta

Video 1: Step-by-step installation guide for the Lithonia Lighting Ultra-Thin Wafer Downlight. This video demonstrates the process of cutting the ceiling hole, wiring the remote driver box, and securing the LED module.

5. Nga Tohutohu Whakahaere

The Lithonia Lighting WF6 LED Downlight is designed for simple operation.

• Hiko Whakaka/Weto: Whakahaerehia te rama ma te whakamahi i te pana pakitara paerewa e hono ana ki te ara iahiko.
• Āhuahira Moama: This downlight is dimmable. For optimal performance, use with compatible LED dimmers. A list of compatible dimmers can be found on the product's spec sheet.
• Paemahana Tae: This specific model (WF6 LED 30K MW M6) provides a 3000K (Bright White) color temperature. Other models in the series may offer selectable color temperatures.

Whakaahua 4: Example of different color temperatures in a room setting. This model provides 3000K.

6. Tiaki

The Lithonia Lighting WF6 LED Downlight requires minimal maintenance.

• Te horoi: Ensure power is off before cleaning. Use a soft, dry cloth to wipe the surface of the fixture. Avoid abrasive cleaners or solvents that may damage the finish.
• Maamaa LED: The integrated LED has an average life of 36,000 hours, which translates to over 16 years when used 6 hours per day. No bulb replacement is necessary.

7. Te Raru

If you encounter issues with your downlight, refer to the following common troubleshooting steps:

• Kare te Maama e Ka ana:
  • Tirohia te ara iahiko kia mohio kei te tukuna te hiko ki te taputapu.
  • Verify all electrical connections in the remote driver box are secure.
  • Ensure the connection between the LED module and the driver box is tight.
• Nga take e korikori ana, e rangirua ana ranei:
  • Ensure you are using an LED-compatible dimmer switch. Incompatible dimmers can cause flickering or improper dimming.
  • Tirohia mo nga hononga waea korekore.
• Fixture Not Sitting Flush:
  • Verify the ceiling hole diameter is correct (5.9 inches for the back hole). A hole that is too large may prevent the spring clips from holding securely.
  • Ensure the spring clips are fully engaged and holding the fixture firmly against the ceiling.

8. Whakatakotoranga

Whakaahua 5: Nga Ahua Hua

Figure 6: Product Certifications

9. Pūtāhui me te Tautoko

Pūtāhui: This Lithonia Lighting product comes with a 5-year limited warranty.

For further assistance, technical support, or warranty claims, please contact Lithonia Lighting customer service or visit their official website. Refer to the product packaging or the official Lithonia Lighting webpae mo nga korero whakapā o naianei.