1. Kupu Whakataki
This manual provides essential information for the safe installation, operation, and maintenance of your Lithonia Lighting BLT Series 2x4 Low Profile LED Troffer Light. Please read these instructions thoroughly before installation and retain them for future reference.
The BLT Series LED Troffer is designed to deliver clean, cool white illumination (4000K) and reliable performance in drop ceilings. Its center-basket style with a curved, ribbed diffuser provides 4000 lumens of uniform light, suitable for various indoor environments such as offices, classrooms, and corridors. The slim 2-3/8 inch depth facilitates installation in restrictive plenum spaces.
2. Nga korero haumaru
WHAKATŪPATO: Te mate o te ru hiko. Momotuhia te hiko i te whakakorikori, i te ara iahiko ranei i mua i te whakaurunga, i te ratonga ranei.
- All electrical connections must be in accordance with local codes and the National Electric Code (NEC).
- If you are unfamiliar with proper electrical wiring connections, consult a qualified electrician.
- Do not install this fixture in wet locations. It is rated for damp nga waahi.
- Me whakarite kia tika te turanga o te taputapu ki te karo i nga aitua hiko.
- Kaua e hapai i te taputapu me nga ringa makuku.
- Manatokohia ko te tuku voltage is compatible with the fixture's requirements (MVOLT 120-277V).
3. Ihirangi mokete
Kei roto i te kete nga waahanga e whai ake nei:
- 1 x LED Troffer Light Fixture
Note: Additional mounting hardware may be required depending on the installation surface and is not included.
4. Hua Neke Atuview
5. Tāuta me te Tatūnga
The BLT Series LED Troffer Light is designed for easy installation in standard drop ceilings.
- Whakapaia te Rohe Tāuta: Ensure power is disconnected at the circuit breaker. Clear the ceiling grid area where the fixture will be installed.
- Position the Fixture: The fixture's shallow depth (2-3/8 inches) allows for installation in restrictive plenum settings. Carefully lift the fixture into the ceiling grid opening.
- Whakaorangia te Whakaritenga: The end plates of the fixture contain integral T-bar clips. Position these clips to securely attach the luminaire to the T-grid system.
- Hononga Hiko: Connect the fixture's wiring to the building's electrical supply (120-277V) according to local electrical codes. Ensure proper grounding. If dimming functionality is desired, connect the 0-10V dimming wires to a compatible dimming driver.
- Mahi Whakamatau: Once all connections are secure and the fixture is properly mounted, restore power and test the light's functionality.
Video 5.1: Demonstration of the Lithonia Lighting BLT Series Low Profile LED Drop in Ceiling Light in an office setting, showcasing its illumination and appearance.
6. Mahi
The Lithonia Lighting BLT Series LED Troffer Light operates by connecting to a standard electrical circuit. Once installed and powered, the light will illuminate.
- Mana Whakaka/Weto: The light is controlled via a standard wall switch connected to the electrical circuit.
- Taumahinga Ngahuru: This fixture is equipped with a generic 0-10 volt dimming driver, allowing it to dim down to 10% of its full brightness. To utilize this feature, the fixture must be connected to a compatible 0-10V dimmer switch (sold separately).
7. Tiaki
The BLT Series LED Troffer Light requires minimal maintenance.
- Te horoi: Me tino momotu te hiko i mua i te horoinga. Whakamahia he mea ngohengohe, he mea maroke, he mea paku rānei te whakamaroke.amp cloth to wipe the exterior surfaces of the fixture. Avoid abrasive cleaners or solvents, as these can damage the finish and diffuser.
- LED Roa: The long-life LEDs are rated for 80% lumen maintenance at 60,000 hours, meaning they are designed for extended operation without requiring frequent replacement.
8. Te Raru
If you experience issues with your LED Troffer Light, refer to the following common troubleshooting steps:
- Kare te rama e ka ana:
- Tirohia te ara iahiko kia mohio kei te tukuna te hiko ki te taputapu.
- Me manatoko kei te mau tonu ngā hononga hiko katoa, ā, kei te tika hoki te waea.
- Me whakarite kei te 'ON' te whakakā pakitara.
- Ka whiti te marama, ka pohehe ohorere ranei:
- Confirm the fixture is connected to a compatible 0-10V dimmer if dimming is intended. Incompatible dimmers can cause flickering.
- Tirohia mo nga hononga waea korekore.
- Te putanga mārama kua whakaitihia:
- Ensure the diffuser is clean and free from dust or debris.
- Verify the dimmer setting is not set too low, if applicable.
Ki te kore ēnei mahi e whakatau i te raruraru, whakapā atu ki te tautoko kiritaki.
9. Whakatakotoranga
| Āhuahira | Whakatakotoranga |
|---|---|
| Waitohu | Maama Lithonia |
| Ingoa Tauira | BLT Series |
| Nama Wahi | 2BLT4 40L ADP LP840 |
| Hunga Hua | 47.75"L x 23.75"W x 2.38"H |
| Taumaha Tūemi | 17 Pauna |
| Momo Puna Maama | LED |
| Te Paemahana Tae | 4000 Kelvin (Maahau) |
| Tirohanga | 4000 Lumens |
| Wattage | 34 watts |
| Voltage | 120-277 Volts (MVOLT) |
| Karekau | Yes (0-10V dimming to 10%) |
| Momo Tāuta | Recessed (Drop Ceiling) |
| Rauemi | Alloy Steel (Housing) |
| Rauemi whakamarumaru | kiriaku |
| Momo Whakaoti | Kua pania te paura |
| Mahinga o roto/waho | Roo-roto |
| Taumata Atete Wai | Water Resistant (Damp Tauwāhi i Whakatauria) |
| Tiwhikete | CSA Certified, IC Rated |
10. Pūtāhui
This Lithonia Lighting BLT Series LED Troffer Light is backed by a 7-year limited warranty. For detailed warranty terms and conditions, please refer to the official Lithonia Lighting warranty documentation or contact customer support.
11. Tautoko Kiritaki
For technical assistance, troubleshooting, or warranty inquiries, please contact Lithonia Lighting customer support. Refer to the product packaging or the official Lithonia Lighting webpae mo nga korero whakapā o naianei.