1. Kupu Whakataki
The Einhell TC-SY 700 S electric paint spray gun is a semi-stationary system designed for applying lacquers, glazes, and interior wall paints on medium to large work surfaces. This manual provides essential information for safe and efficient operation, setup, maintenance, and troubleshooting of your device.
Please read this manual thoroughly before using the product for the first time and keep it for future reference.
2. Nga Tohutohu Haumaru
WARNING: Always observe general safety precautions when working with paints and spray paints. Failure to do so may result in serious injury or property damage.
- Taputapu Tiaki Whaiaro: Always wear appropriate personal protective equipment, including eye protection (safety goggles), skin protection (gloves and protective clothing), and respiratory protection (mask) to prevent exposure to paint fumes and particles.
- Whakahau: Ensure adequate ventilation in the work area to prevent the buildup of hazardous fumes. Work in a well-ventilated space or use an exhaust fan.
- Rauemi mura: Do not spray near open flames, pilot lights, or other ignition sources. Many paints and solvents are flammable.
- Haumaru Hiko: Ensure the power cord is in good condition and avoid using the device in wet conditions. Do not operate the spray gun if the power cord is damaged.
- Nga Tamariki me nga Kaitaki: Kia matara atu nga tamariki me te hunga e noho tata ana ki te waahi mahi.
- Tuku Peke: Always release pressure from the system before cleaning, refilling, or performing any maintenance.
- Proper Dilution: Always follow the paint manufacturer's instructions for proper dilution and compatibility with spray guns.
3. Ihirangi mokete
The Einhell TC-SY 700 S electric paint spray gun package includes the following components:
- Einhell TC-SY 700 S Paint Spray System unit
- 3.8-meter air hose
- Te whitiki pakihiwi
- 2 nozzles for different viscosities (lacquer, glaze, paint)
- Purification brush for cleaning the absorption tube
- Purification needle for cleaning the spray nozzle
- Kapu ine ine pokey
- 1000 ml paint container
- Te taupoki ipu
4. Tatūnga
4.1 Preparing the Paint
- Ensure your paint is suitable for spray application. Refer to the paint manufacturer's instructions.
- Use the provided viscosity measuring cup to check the paint's viscosity. Dilute the paint with the appropriate solvent (water for water-based paints, thinner for oil-based paints) until it reaches the recommended viscosity for spraying.
- Pour the prepared paint into the 1000 ml paint container.
4.2 Te Huinga i te Pu Rehu
- Attach the spray head to the main unit.
- Select the appropriate nozzle for your paint type and desired spray pattern.
- Securely attach the paint container to the spray head.
- Connect the air hose from the main unit to the spray gun handle. The anti-twist air hose design helps prevent tangles.
- Attach the shoulder strap to the main unit for comfortable portability during use.
5. Mahi
5.1 Adjusting Spray Pattern and Flow
- Tauira Rehu: The air cap can be adjusted to achieve three different spray patterns: vertical, horizontal, and circular. Rotate the air cap to select the desired pattern.
- Paint Flow Regulation: Use the paint flow regulator knob on the spray gun to precisely adjust the amount of paint being applied. Start with a lower setting and increase as needed.
5.2 Hangarau Rehu
- Hold the spray gun at a consistent distance (typically 15-30 cm) from the surface.
- Nekehia te pū rehu kia maeneene, kia ōrite ngā nekehanga, kia taupatupatu ia nekehanga mā te 50%.
- Avoid tilting the spray gun excessively, as this can lead to uneven application or drips.
- Practice on a test surface (e.g., cardboard) to get a feel for the spray pattern and flow before applying to your main project.
6. Tiaki me te Whakapai
Proper cleaning after each use is crucial to prevent paint residue buildup and ensure the longevity and optimal performance of your spray gun.
- Empty Paint Container: After spraying, empty any remaining paint from the container. If you have excess paint, use the provided lid to seal the container for storage.
- Wewetehia: Detach the spray head from the main unit and disassemble all parts that come into contact with paint (nozzle, air cap, paint container, absorption tube).
- Nga Waahanga Ma: Clean all disassembled parts thoroughly with the appropriate cleaning agent (water for water-based paints, solvent for oil-based paints). Use the purification brush for the absorption tube and the purification needle for the spray nozzle to remove any clogs.
- Horoi me te whakamaroke: Rinse all parts with clean water and allow them to dry completely before reassembling.
- Huihuia: Reassemble the spray gun, ensuring all parts are correctly fitted.
- Toa: Store the spray gun and its accessories in a clean, dry place. The pull-along trolley design allows for convenient and space-saving storage of the hose.
7. Te Raru
| Raruraru | Take pea | Rongoā |
|---|---|---|
| No paint spray or weak spray | Nozzle clogged; paint too thick; air hose kinked; paint container empty. | Clean nozzle with purification needle; dilute paint to correct viscosity; check air hose for kinks; refill paint container. |
| Te tauira rehu koretake | Nozzle partially clogged; incorrect spray pattern setting; inconsistent spraying distance. | Clean nozzle; adjust air cap for desired pattern; maintain consistent distance and movement. |
| Ka pupuhi te peita, te oma ranei | Too much paint flow; paint too thin; spraying too close to surface. | Reduce paint flow with regulator; check paint viscosity and add thickener if necessary; increase spraying distance. |
| Karekau te motuka e timata | Power cord not connected; power outlet faulty; internal fault. | Check power connection; test outlet with another device; contact customer support if problem persists. |
8. Whakatakotoranga Hangarau
| Āhuahira | Whakatakotoranga |
|---|---|
| Kaihanga | Einhell |
| Tau tauira | 4260020 |
| Whakauru Mana | 700 Watts |
| Voltage | 240 Volts |
| Momo Mana | Hiko Hiko |
| Paint Container Volume | 1000 ml |
| Te roa o te ngongo | 3.5 Mita |
| Rahi Hua (L x W x H) | 38.5 x 25 x 41.8 cm |
| Taumaha Tūemi | 3.22 Kirokaramu |
| Rauemi | Konumohe |
| Tae | Whero |
9. Pūtāhui me te Tautoko
This Einhell product comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions, including the warranty period and coverage details. Spare parts availability is typically 1 year from the date of purchase.
For technical support, service, or to order spare parts, please contact Einhell customer service through their official website or the contact information provided in your product documentation. When contacting support, please have your model number (TC-SY 700 S) and serial number (if applicable) ready.
