Intermec PC43TB01100201 Thermal Transfer/Direct Thermal Desktop Printer User Manual

1. Kupu Whakataki

This manual provides essential information for the safe and efficient operation of your Intermec PC43TB01100201 Thermal Transfer/Direct Thermal Desktop Printer. This printer is designed for various label printing applications, offering both thermal transfer and direct thermal printing capabilities at 203 dpi resolution. It features an LCD display for easy navigation, a tear-off function, a real-time clock, and multiple connectivity options including USB 2.0, two USB host ports, and LAN.

Figure 1: Intermec PC43TB01100201 Thermal Transfer/Direct Thermal Desktop Printer. This image shows the compact desktop printer with its LCD display and label output slot.

2. Nga korero haumaru

Please read all safety instructions before operating the printer to prevent injury or damage to the device. Keep this manual for future reference.

• Whakamahia anake te taura hiko i tukuna mai me te kaituhi.
• Kaua e tukuna te kaituhi ki te wai, ki te makuku nui ranei.
• Me whakarite kia whakatakotoria te pūreretā ki runga i tētahi mata pumau, papatahi.
• A ape i te aukati i nga whakatuwheratanga hau.
• Disconnect power before cleaning or servicing the printer.
• Do not attempt to open or repair the printer yourself. Refer to qualified service personnel.

3. Ihirangi mokete

Manatokona kei roto katoa nga mea kei roto i te kete:

• Intermec PC43TB01100201 Printer Unit
• Uira hiko US
• Aratohu Timata Tere (kaore i roto i tenei pukapuka)
• Software/Driver CD (may vary by package)

4. Tatūnga

4.1 Te Wetewete me te Whakanoho

1. Āta tango i te pūreretā mai i tōna tākainga.
2. Place the printer on a flat, stable surface with adequate ventilation.
3. Ensure easy access to power outlets and computer ports.

4.2 Te Mana Hononga

1. Connect the supplied US power cord to the printer's power input.
2. Monohia tetahi pito o te taura hiko ki tetahi putanga hiko kua oti te tu.

4.3 Te hono atu ki te Rorohiko

The PC43TB01100201 printer supports USB and LAN connectivity.

• Hononga USB: Connect a USB cable (not always included) from the printer's USB 2.0 port to an available USB port on your computer.
• Hononga LAN: Connect an Ethernet cable (not always included) from the printer's LAN port to your network router or switch.

4.4 Loading Media (Labels/Ribbon)

Refer to the printer's internal diagrams or quick start guide for specific instructions on loading labels and, if using thermal transfer, the ribbon. Ensure the media is correctly aligned for proper printing.

• Whakatūwherahia te uhi pūreretā.
• Place the label roll onto the media supply spindle.
• Feed the labels through the media guides.
• If using thermal transfer, install the ribbon according to the printer's instructions.
• Katia te uhi pūreretā.

5. Nga Tohutohu Whakahaere

5.1 Kei te Hiko / Weto

• Hei Whakahiko: Press the power button located on the printer. The LCD display will illuminate.
• Hei Whakaweto: Press and hold the power button until the printer shuts down.

5.2 Te Whakamahi i te Whakaaturanga LCD

The LCD display provides status information and allows for configuration changes. Navigate through menus using the control buttons (Push Button Controller Type) adjacent to the display.

• View printer status and error messages.
• Adjust settings such as print darkness, speed, and media type.
• Perform calibration for new media rolls.

5.3 Te Ta

Once the printer is connected to your computer and drivers are installed, you can print labels from compatible software applications. The printer supports Latin fonts.

1. Open your label design software or application.
2. Create or open the label design.
3. Select the Intermec PC43TB01100201 as your printer.
4. Adjust print settings as needed (e.g., number of copies, print quality).
5. Tīmatahia te mahi tā.

The printer features a tear-off function for easy label separation after printing.

6. Tiaki

6.1 Te horoi i te Pūreretā

Mā te horoi auau ka mau tonu te kounga o te tānga, ka roa ake hoki te roa o te ora o te pūreretā.

• Tiri: Clean the printhead with an alcohol swab or printhead cleaning wipe when print quality degrades or after every few media roll changes. Ensure the printer is off and cool.
• Platen Roller: Clean the platen roller with an alcohol swab to remove adhesive residue or dust.
• Waho: Horoia te waho ki te ngohengohe, damp kakahu. Kaua e whakamahi i nga horoi horoi.

6.2 Replacing Media and Ribbon

Replace media rolls and thermal transfer ribbons as they run out. Follow the loading instructions in Section 4.4.

7. Te Raru

This section addresses common issues you might encounter. For more complex problems, contact Intermec support.

• Kaore te Kairereta i te whakautu:
  • Tirohia nga hononga hiko.
  • Verify USB or LAN cable connections.
  • Tīmata anō i te pūreretā me te rorohiko.
  • Me whakarite kua tāuta tika ngā taraiwa pūreretā.
• He Rawe te Kounga Ta:
  • Horoia te pane tā (tirohia te Wāhanga 6.1).
  • Adjust print darkness settings via the LCD display or printer driver.
  • Ensure correct media type is selected.
  • Check if the ribbon (for thermal transfer) is correctly installed and not depleted.
• Labels Not Feeding Correctly:
  • Reload media, ensuring it is properly aligned in the guides.
  • Calibrate the printer for the loaded media type.
  • Check for any obstructions in the media path.
• LCD Display Error Messages:
  • Consult the printer's on-screen help or the full user manual for specific error code meanings and resolutions.

8. Whakatakotoranga

9. Pūtāhui me te Tautoko

For detailed warranty information, please refer to the documentation provided with your purchase or contact your reseller. Intermec provides support for its products.

• Kaihanga: Pouakati
• Tau tauira: PC43TB01100201
• For technical assistance, visit the official Intermec support webpaetukutuku, whakapā atu ranei ki ta raatau ratonga kaihoko.