1. Kupu Whakataki
The DAB E.SYBOX is an integrated electronic water booster system designed for domestic and residential applications. This system provides constant water pressure while optimizing energy consumption. It is suitable for use with potable water in domestic plants, for gardening, and irrigation. The E.SYBOX can also be used to create groups of up to four pumps.
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your E.SYBOX system. Please read it thoroughly before installation and keep it for future reference.
2. Nga korero haumaru
WARNING: Before performing any operation on the pump, disconnect it from the main power supply.
- Whakaritehia te voltage matches the specifications of the E.SYBOX (230V).
- Ko te whakaurunga me te tiaki me mahi ma nga kaimahi mohio anake.
- Do not operate the pump with flammable or explosive liquids.
- Whakaorangia te waeine mai i te wera mīti.
- Me whakarite kia tika te hau huri noa i te waahanga kia kore ai e wera rawa.
- Me tika te whakatuu whenua.
3. Ihirangi mokete
Manatokohia kei te noho katoa nga waahanga me te kore e pakaru i te wa e wetewete ana:
- DAB E.SYBOX Water Booster System Unit
- Waea hiko
- Connection Pieces (e.g., 1" plastic unions)
- Pukapuka Kaiwhakamahi (tenei tuhinga)
4. Tatūnga me te Tāuta
The E.SYBOX is designed for straightforward installation and requires no additional components for basic setup. It can be installed either vertically or horizontally.
4.1. Te Kōwhiri i tētahi Wāhi Tāutanga
Tīpakohia he tauwāhi ko:
- Protected from direct sunlight and extreme temperatures.
- In a closed space without a high level of air exchange, as the unit is water-cooled and quiet.
- He waatea mo te tiaki.
- Near the water source and the distribution system.
4.2. Tāutanga Tinana
- Te Whakanoho i te Waeine: Place the E.SYBOX on a stable, level surface. The anti-vibration feet help reduce noise. The unit can be positioned vertically or horizontally.
- Te Hononga i ngā Paipa Wai: Connect the inlet pipe from your water source to the suction port and the outlet pipe to your distribution system. Use the provided 1" plastic unions for secure connections. Ensure all connections are watertight.
- Hononga Hiko: Connect the power cord to a grounded 230V AC outlet. Ensure the power supply is stable and protected from surges.
- Priming the Pump (if necessary): For initial startup or after maintenance, ensure the pump is filled with water before operation to prevent dry running. Refer to the display for priming instructions.
Whakaahua 1: Mua view of the DAB E.SYBOX unit, showing the display and general form factor.
Whakaahua 2: Whakamuri view of the E.SYBOX, highlighting the water inlet and outlet connections.
5. Nga Tohutohu Whakahaere
The E.SYBOX features an adjustable, high-resolution LCD display for easy operation and monitoring.
5.1. Te Hia-Ai Tuatahi
- Once connected to power, the LCD display will illuminate.
- Follow the on-screen prompts for initial setup, which may include language selection and basic pressure settings.
5.2. Setting Desired Pressure
The E.SYBOX allows you to set your desired water pressure. The system will then maintain this constant pressure by adjusting pump speed.
- Navigate through the LCD menu using the control buttons adjacent to the display.
- Locate the "Pressure Setting" option.
- Adjust the pressure value (e.g., in PSI or Bar) to your preference. The system can deliver up to 210 ft (approx. 90 PSI) of head.
- Confirm your selection. The system will automatically adjust to maintain this pressure.
Figure 3: E.SYBOX display showing operational parameters such as power consumption (360W), pressure (3 Bar / 43 PSI), and flow rate (3.2 GPM / 12 l/min).
5.3. Aroturuki Mahinga
The LCD display provides real-time statistics:
- Pēhanga: Current system pressure.
- Rere Rere: Instantaneous water flow.
- Whakamahi Hiko: Energy consumption of the unit.
- Whakaoho/Whakatupato: Notifications for any operational issues.
6. Tiaki
Regular maintenance ensures the longevity and optimal performance of your E.SYBOX system.
6.1. Nga Tirohanga Mahi
- Tirotiro Ataata: Periodically check for any leaks, unusual noises, or visible damage.
- Air Exchange: Ensure the area around the unit is not obstructed to allow for proper air circulation for the water-cooled motor.
6.2. Pūoko Cleaning
Over time, sediment may accumulate and affect the flow sensors. The E.SYBOX comes with a tool for cleaning these sensors.
- Momotu Mana: Always disconnect the unit from the power supply before any maintenance.
- Locate Sensors: Refer to the detailed diagram in the full technical manual (if available) to locate the flow sensors.
- Ma: Use the provided tool to carefully clean any accumulated sediment from the sensors.
- Whakahono ano: Reassemble any removed parts and reconnect power.
6.3. Ko te takurua
If the unit is installed in an area subject to freezing temperatures, it must be drained to prevent damage.
- Momotuhia te mana.
- Drain all water from the pump and associated piping.
- Store in a frost-free environment if possible, or ensure complete drainage.
7. Te Raru
This section addresses common issues you might encounter with your E.SYBOX system.
| Raruraru | Take pea | Rongoā |
|---|---|---|
| No water flow / Pump not starting | No power; Air in pump; Clogged inlet; Low water level in source. | Check power connection; Prime the pump; Clean inlet filter; Ensure adequate water supply. |
| Te pehanga iti | Incorrect pressure setting; Partially clogged filter/pipes; Air in system. | Adjust pressure setting on LCD; Inspect and clean filters/pipes; Bleed air from system. |
| Pump runs continuously / Frequent on/off cycling | Leak in system; Small continuous flow (e.g., dripping faucet); Faulty sensor. | Check for leaks in plumbing; Address small continuous flows; Contact support if sensor is suspected. |
| Haruru rerekee, wiri ranei | Air in pump; Loose connections; Foreign object in pump. | Prime the pump; Check and tighten all connections; Disconnect power and inspect pump impeller (if safe and accessible). |
| LCD display error message | He hapa punaha motuhake. | Note the error code and consult the full technical manual or contact customer support. |
Mena kei te haere tonu te raru i muri i te whakamatau i enei otinga, tena koa whakapā atu ki te tautoko a te kaihoko.
8. Whakatakotoranga
| Āhuahira | Taipitopito |
|---|---|
| Tauira | 60161182 |
| Voltage | 230 Volts |
| Puna Mana | AC/DC |
| Rere Rere Morahi | 32 Karani mo ia meneti (GPM) |
| Teitei Whakaara Mōrahi (Upoko) | 210 Puawai |
| Awhe Temperature Wai | +32 to +95°F (domestic use), +32 to +102°F (other uses) |
| Te Hohonu Momo Momorahi | 26 Puawai |
| Taumaha Tūemi | 57 Pauna |
| Rahi Hua (L x W x H) | 14.25 x 10.35 x 22.2 inihi |
| Rauemi | ABS |
| Integrated Expansion Tank | 0.5 Karani |
9. Pūtāhui me te Tautoko
9.1. Nga Korero Whakaputanga
DAB provides a limited warranty for the E.SYBOX 230V Water Booster System against defects in materials and workmanship under normal use and service. The specific duration and terms of the warranty may vary by region and purchase date. Please retain your proof of purchase for warranty claims.
For detailed warranty terms and conditions, refer to the warranty card included with your product or visit the official DAB webpae.
9.2. Tautoko Kiritaki
If you require technical assistance, have questions about installation, operation, or maintenance, or need to report a problem, please contact DAB customer support.
- Tautoko Aipurangi: Visit the official DAB Pumps website for FAQs, technical documents, and contact forms.
- Tautoko Waea: Refer to the contact information provided on the DAB webte pae tukutuku, te takai hua rānei mō ngā nama tautoko ā-rohe.
- When contacting support, please have your product model (60161182) and serial number (if applicable) ready.
