He Aratohu Kaiwhakamahi mō te Rama PONGEE LED Philips myLiving (Tauira 5058131PN)

1. Kupu Whakataki

This manual provides essential information for the safe and effective installation, operation, and maintenance of your Philips myLiving PONGEE LED Spot Light, Model 5058131PN. Please read these instructions carefully before installation and retain them for future reference.

Figure 1: Philips myLiving PONGEE LED Spot Light

The Philips myLiving PONGEE spot light is designed for indoor use in functional spaces such as bedrooms or living rooms. Its swivel head allows for adjustable light direction, providing illumination precisely where needed.

2. Nga korero haumaru

Kia mau tonu nga whakaritenga haumaru e whai ake nei hei aukati i te whara, i te kino ranei:

• Haumaru Hiko: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Always disconnect power at the main fuse or circuit breaker before installation, maintenance, or bulb replacement.
• Whakamahi Roto anake: This product has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Do not install in bathrooms or other areas where it may be exposed to moisture.
• Momo Puma: Whakamahia ngā pūangi LED GU10 anake e ai ki te tohu. Kaua e neke atu i te mana mōrahi.tage tohuhia ana i runga i te taputapu.
• Te whakahaere: Do not touch the bulb immediately after use as it may be hot. Allow it to cool before handling.
• Te horoi: Horoia te taputapu ki te kakahu ngohengohe, maroke. Kaua e whakamahi i nga kai horoi me nga whakarewa.

3. Ihirangi mokete

Manatokona kei te noho nga waahanga katoa i mua i te tiimata o te whakaurunga:

• Philips myLiving PONGEE LED Spot Light fixture (1 unit)
• Ko nga taputapu whakapuru (ngiu, nga whakapiri pakitara)
• He pukapuka tohutohu

Tuhipoka: A GU10 LED bulb is kaore i whakauruhia a me hoko motuhake.

Whakaatu 2: Whakapaipai Hua

4. Tatūnga me te Tāuta

This spot light is designed for surface mounting on ceilings or walls. Refer to the dimensions diagram for planning your installation.

Figure 3: Product Dimensions (all measurements in mm)

1. Whakapaia te Rohe Tāuta: Ensure the mounting surface is clean, dry, and structurally sound. Mark the desired mounting points based on the fixture's base.
2. Momotu Mana: Before starting any electrical work, turn off the power supply to the circuit at the main fuse box or circuit breaker.
3. Maunga te turanga: Secure the fixture's mounting base to the ceiling or wall using the provided screws and wall plugs. Ensure it is firmly attached.
4. Waea i te Whakapiri: Connect the electrical wires from the ceiling/wall to the fixture's terminals. Follow the standard wiring color codes (e.g., Live to Live, Neutral to Neutral, Earth to Earth). Ensure all connections are secure.
5. Tāutahia te Purama: Insert a GU10 LED bulb (not included) into the socket by aligning the pins and twisting clockwise until secure.
6. Whakapirihia te Tinana Whakanoho: Secure the main body of the spot light to the mounted base.
7. Whakaora i te Mana: Once installation is complete and all connections are checked, restore power at the main fuse box or circuit breaker.

5. Nga Tohutohu Whakahaere

The Philips myLiving PONGEE LED Spot Light is operated via a standard wall switch connected to its electrical circuit.

• Whakakā/Weto: Flip the wall switch to the 'ON' position to illuminate the spot light. Flip it to the 'OFF' position to turn it off.
• Whakaritea Aronga Maama: The spot light features a swivel head. Gently adjust the light head to direct the beam to your desired area. Avoid excessive force when adjusting.

6. Tiaki

• Te horoi: Ensure the power is off and the fixture is cool before cleaning. Wipe the exterior with a soft, dry, lint-free cloth. Do not use liquid cleaners, aerosols, or abrasive materials.
• Whakakapi Purama:
  1. Whakawetohia te hiko hiko i te ara iahiko.
  2. Allow the bulb to cool completely.
  3. Gently twist the old GU10 bulb counter-clockwise to remove it from the socket.
  4. Whakauruhia he pūangi LED GU10 hou mā te whakarārangi i ngā pine ka takai ki te taha matau kia mau ra ano.
  5. Whakahokia te mana.

7. Te Raru

8. Whakatakotoranga

• Waitohu: Philips Rama
• Tau tauira: 5058131PN
• Rahi Hua (L x W x H): 10 x 13.8 x 8.2 cm
• Taumaha Tūemi: 345 karamu
• Rauemi: Te whakarewa
• Tae: Mā
• Kāhua: Hou
• Momo Puna Maama: LED
• Bulb Socket Type: GU10
• Tau o nga Maama: 1 (bulb not included)
• Whakauru Voltage: 220-240 volts
• Puna Hiko: Electrical cable (wired)
• Momo Tāuta: Surface Mount (Ceiling/Wall)
• Whakatauranga IP: IP20 (Whakamahia Roto anake)
• Nga waahanga motuhake: Energy-efficient, Swivel head
• Whakamahinga Tauwhāiti: Kāinga, Rūma Moe, Rūma Noho

9. Pūtāhui me te Tautoko

Mō ngā mōhiohio pūtāhui me te tautoko kiritaki, tirohia te kāri pūtāhui kei roto i tō hua, tirohia rānei te tari Philips Lighting mana. webpae. Ka taea hoki e koe te whakapā atu ki tō kaihokohoko mō te āwhina.

Puritia to tohu hoko mo etahi kereme whakamana.