Rigol DL3031 Programmable DC Electronic Load

1. Kupu Whakataki me Nekeview

The Rigol DL3031 is a high-performance, single-channel programmable DC electronic load. It is an essential instrument for engineers and technicians involved in power supply testing, battery discharge testing, LED driver testing, and other applications requiring precise load simulation. This manual provides detailed instructions for setting up, operating, and maintaining your DL3031 electronic load.

Ko nga ahuatanga matua ko:

• Single channel, DC150 V/60 A, total power up to 350 W.
• Dynamic mode: up to 15 kHz.
• Adjustable current rising speed: 0.001 A/µs to 5 A/µs.
• Min. readback resolution: 1 mV, 1 mA.
• 4.3-inch TFT LCD, capable of displaying multiple parameters and states simultaneously.
• Whakawhanatage/overcurrent/overpower/overtemperature/reverse voltagtiaki.
• 4 static modes: CC, CV, CR, CP.
• 3 dynamic modes: continuous, pulsed, toggled.
• Built-in RS232/USB/LAN communication interface.
• Battery test function, OCP test, OPP test, factory test function, etc.

Whakaahua 1.1: Mua view of the Rigol DL3031 Programmable DC Electronic Load.

2. Tatūnga

2.1 Te Wetewete me te Tirotiro

Carefully unpack the DL3031 electronic load and all accessories from its packaging. Verify that all components listed below are present and undamaged. If any items are missing or damaged, please contact your Rigol distributor immediately.

• Rigol DL3031 Electronic Load Unit
• Waea hiko
• Tauira USB
• Aratohu Tere
• Tiwhikete Whakatau

Figure 2.1: Typical package contents for the Rigol DL3031.

2.2 Hononga Tinana

I mua i te whakakā i te taputapu, me whakarite kia mau te hononga katoa e tika ana.

1. Hononga Hiko: Connect the supplied power cord to the AC power input on the rear panel and to a suitable AC power outlet. Ensure the voltage selector (if present) matches your local power supply.
2. Load Input Terminals: Connect the device under test (DUT) to the red (+) and black (-) input terminals on the front panel. For high current applications, use appropriate gauge wires to minimize voltage maturuturu.
3. Sense Terminals (Optional): Mō te rōrahi tikatage regulation at the DUT, connect the sense terminals (S+ and S-) to the DUT's output. This compensates for voltage drop across the load wires.
4. Atanga Whakawhitiwhiti: The DL3031 supports various communication interfaces for remote control and data logging.
• Kaihautū USB: Located on the front panel, used for connecting USB storage devices.
• Pūrere USB: Located on the rear panel, used for connecting to a PC for remote control.
• LAN: Located on the rear panel, for network connectivity and remote control.
• RS-232: Located on the rear panel, for serial communication.
• Mamati I/O: Located on the rear panel, for external triggering and control signals.

Figure 2.2: Rear panel connections of the Rigol DL3031.

2.3 Hiko Tuatahi

After making all physical connections, press the power key on the front panel to turn on the electronic load. The 4.3-inch TFT LCD will display the startup screen, followed by the main measurement interface.

3. Te whakahaere i te DL3031

3.1 Mana Paewhiri Mua

The front panel of the DL3031 is designed for intuitive operation. Familiarize yourself with the various controls and their functions.

Figure 3.1: Labeled front panel of the Rigol DL3031.

• LCD: 4.3-inch TFT display for showing measurement data, settings, and waveforms.
• Function Keys (CC, CV, CR, CP, List): Tīpakohia te aratau whakahaere e hiahiatia ana.
• Control Keys (Up, Down, Left, Right, OK): Navigate menus and adjust parameters.
• Input Control Keys (Numeric Keypad): Directly input numerical values.
• Piko: Fine-tune parameter values.
• System Function Keys (Local, Utility, Option, Store, Help): Access system settings, save/recall configurations, and view korero awhina.
• Waveform Display Key: Toggles the waveform display for real-time graphing of parameters.
• Application Key (APP): Accesses specialized application modes like Battery Test, OCP, and OPP.
• Kaihautū USB: Mo te hono i nga taputapu rokiroki USB.
• Kī Hiko: Ka whakaweto / whakaweto te waeine.
• Channel Terminals (S+, S-, Input +, Input -): Connect the DUT and sense lines.

3.2 Aratau Mahi

The DL3031 offers a variety of operating modes to suit different testing requirements.

3.2.1 Ngā Aratau Pūmau

These modes maintain a constant load condition.

• CC (Constant Current): Maintains a constant current draw from the DUT.
• CV (Taumau Voltage): Maintains a constant voltage across the DUT.
• CR (Constant Resistance): Maintains a constant resistance load on the DUT.
• CP (Constant Power): Maintains a constant power dissipation from the DUT.

3.2.2 Aratau Hihiko

These modes allow for varying load conditions over time.

• Tonu: Provides a continuous dynamic load.
• Puhia: Generates pulsed load changes.
• Toggled: Switches between two defined load levels.
• Rārangi: Allows programming a sequence of up to 512 steps with different load conditions and durations.

3.2.3 Aratau Taupānga

Access these specialized tests via the APP kī.

• Whakamātautau Pūhiko: Designed for testing battery discharge characteristics.
• OCP Test (Over Current Protection): Tests the overcurrent protection of a power supply.
• OPP Test (Over Power Protection): Tests the overpower protection of a power supply.

3.3 Waveform Graphing

The DL3031 can display real-time waveforms of current, voltage, resistance, and power over time, similar to an oscilloscope. This feature is useful for analyzing dynamic load responses and identifying transient behaviors.

4. Tiaki

Proper maintenance ensures the longevity and accuracy of your DL3031 electronic load.

• Te horoi: Regularly clean the exterior of the instrument with a soft, damp kakahu. Kaua e whakamahi i nga kai horoi me nga whakarewa.
• Whakahau: Ensure the rear exhaust fan and ventilation slots are clear of obstructions to prevent overheating. The fan is crucial for dissipating heat generated during operation.
• Whakakapinga Fuse: If the unit does not power on, check the fuse located near the AC power input on the rear panel. Replace with a fuse of the same type and rating as indicated on the unit (e.g., T 15A/250V for 230V AC, T 30A/250V for 115V AC).

Figure 4.1: Rear panel showing the exhaust fan and fuse location.

5. Te Raru

This section provides solutions to common issues you might encounter with the DL3031.

If the problem persists after attempting these solutions, please contact Rigol customer support.

6. Whakatakotoranga

The following table outlines the key technical specifications for the Rigol DL3031 Electronic Load.

7. Pūtāhui me te Tautoko

7.1 Nga Korero Whakaputanga

The Rigol DL3031 Programmable DC Electronic Load is manufactured by RIGOL TECHNOLOGIES USA INC. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Rigol webpae. Puritia to tohu hoko mo nga kereme whakamana.

Ka waatea pea nga mahere whakamarumaru mo te hoko:

• Mahere Tiaki 3-Tau
• Mahere Tiaki 4-Tau
• Whakaotia te Tiaki (kowhiringa whakahou-marama)

7.2 Tautoko Hangarau

For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact Rigol customer support. You can find contact information on the official Rigol website or through your local distributor. When contacting support, please have your product model number (DL3031) and serial number ready.