VIVO STAND-V102F Dual Monitor Free-Standing Desk Mount

1. Kupu Whakataki

This manual provides detailed instructions for the assembly, operation, and maintenance of your VIVO STAND-V102F Dual Monitor Free-Standing Desk Mount. This mount is designed to hold two flat or curved display screens ranging from 13 to 30 inches, with a maximum weight capacity of 17.6 lbs per screen. It supports VESA mounting patterns of 75x75mm or 100x100mm.

Whakatupato Haumaru:

• Me whakarite kia mau nga waahanga katoa i mua i te whakamahi.
• Kaua e neke ake i te kaha o te taumaha o te 17.6 lbs mo ia mata.
• Avoid pulling monitors too far forward or backward unless the stand is bolted down, as this may compromise stability.
• Always check that the base size fits your available desk space to prevent tipping.

2. Ihirangi mokete

Please verify that all components listed below are present in your package. If any parts are missing or damaged, contact VIVO customer support.

• Heavy-Duty Base (11" x 15.4")
• Center Pole (16.4" height)
• Dual Monitor Arms with VESA Plates
• Topenga Whakahaere Taura
• All necessary hardware (screws, washers, Allen keys)

3. Nga Tohutohu Huihuinga

Follow these steps to assemble your VIVO Dual Monitor Free-Standing Desk Mount.

1. Attach the Center Pole to the Base: Securely fasten the center pole to the heavy-duty base using the provided screws and Allen key. Ensure it is stable.
2. Install Monitor Arms: Slide the dual monitor arms onto the center pole. Adjust their height to your preference and tighten the locking mechanism.
3. Tāpirihia ngā Pereti VESA ki ngā Aroturuki: Remove the VESA plates from the monitor arms. Attach these plates to the back of your monitors using the appropriate screws for your monitor's VESA pattern (75x75mm or 100x100mm).
4. Whakamau Aroturuki: Carefully slide the monitors (with attached VESA plates) onto the monitor arms. Ensure they click securely into place.
5. Whakaha Uepu: Utilize the included cable management clips to route and organize your monitor cables along the arms and down the center pole for a tidy setup.

Figure 1: Assembled VIVO Dual Monitor Free-Standing Desk Mount with monitors.

Figure 2: Detail of VESA plate for monitor attachment.

4. Nga Tohutohu Whakahaere

The VIVO STAND-V102F offers full articulation for optimal viewnga koki.

• Whakatikatika Teitei: Wewetehia te clamp on the center pole to slide the monitor arms up or down. Re-tighten the clamp firmly once the desired height is achieved.
• Whakaritea Tita: Monitors can be tilted +45° to -45°. Adjust the tilt knob on the VESA plate to achieve your preferred vertical viewkoki.
• Whakatikatika hurihuri: The monitor arms allow for 180° swivel, enabling you to adjust the horizontal angle of each monitor independently.
• Hurihuri: Monitors can be rotated 360° for portrait or landscape orientation. Simply turn the monitor to the desired orientation.
• Te Hononga o te Ringa: The double center arm joints provide additional articulation, allowing for flexible monitor placement and positioning.

Figure 3: Full articulation features including tilt, swivel, and rotation.

Whakaahua 4: Example of monitors in both portrait and landscape orientations.

5. Nga ahuatanga

• Hototahi Ao: Fits two screens from 13" to 30" and up to 17.6 lbs each. Supports VESA 75x75mm or 100x100mm mounting patterns.
• Full Articulation: Offers +45° to -45° tilt, 180° swivel, and 360° rotation for flexible viewing.
• Whakatikatika Teitei: Monitors can be adjusted along the 16.4" center pole.
• Heavy-Duty Base: A solid steel 11" x 15.4" base ensures stability for your monitor setup.
• Whakahaere Taura Whakakotahi: Clips are included to keep cables organized and out of sight.

Figure 5: Key dimensions and compatibility information.

Figure 6: The heavy-duty base providing stability.

Figure 7: Integrated cable management system.

6. Whakatakotoranga

7. Tiaki

Hei whakarite i te roa o te wā me te mahi tino pai o tō whakairinga mata VIVO, whai i ēnei aratohu tiaki:

• Whakapai auau: Horoia te papa ki te wai ngohengohe,amp cloth to remove dust and debris. Avoid abrasive cleaners or solvents.
• Tirohia nga Whakapiri: Tirotirohia ia ia nga wa katoa nga wiri me nga tutaki kia mau tonu. Whakapikihia ano e tika ana kia mau tonu.
• Whakahinuhinu: If any joints become stiff, a small amount of silicone-based lubricant can be applied to the moving parts.

8. Te Raru

If you encounter any issues with your monitor mount, refer to the following common problems and solutions:

• Mount is Unstable/Tipping:
  • Ensure the heavy-duty base is fully on a flat, stable surface.
  • Verify that the combined weight of your monitors does not exceed the maximum capacity.
  • Avoid extending monitors too far forward or backward from the center pole without securing the base to the desk (if applicable).
• Monitors Sagging/Not Holding Position:
  • Tighten the tilt adjustment knob on the VESA plate.
  • Ensure all arm joints are securely tightened with the provided Allen key.
• Uauatanga ki te Whakatika i te Honga:
  • Some tilt bolts may require a specific Allen key or tool for proper tightening/loosening. Refer to the assembly diagram for exact locations.
  • Ensure the monitor is not exceeding the weight limit, which can make adjustments difficult.

9. Ataata Hua Whaimana

10. Pūtāhui me te Tautoko

VIVO products are backed by a manufacturer's warranty. For specific warranty details, product registration, or technical support, please visit the official VIVO webpaetukutuku, whakapā atu ranei ki ta raatau tari ratonga kaihoko. Puritia to rihiti hoko mo nga kereme whakamana.

VIVO is a US-based company committed to providing quality ergonomic solutions. Their sales and technical support teams are available to assist with any product-related inquiries.

Figure 8: VIVO's commitment to customer support.