Kupu Whakataki
Thank you for choosing the ClearClick Retro AM/FM Radio with Bluetooth. This classic wooden vintage-style speaker combines nostalgic aesthetics with modern functionality, allowing you to enjoy both traditional radio broadcasts and contemporary digital audio. This manual provides essential information for setting up, operating, and maintaining your new radio.
Ka mutu te huaview
Whakaahua 1: Mua view of the ClearClick Retro AM/FM Radio, showcasing its classic wooden design and central tuning dial.
Figure 2: Close-up of the tuning dial and control knobs for FM/AM/BT selection and volume.
The ClearClick Retro Radio features a beautiful, handmade wooden exterior, an easy-to-use tuning dial, and dedicated knobs for mode selection and volume control. It is designed to be powered by a standard North American power plug.
Tatūnga
- Wewete ana: Carefully remove the radio from its packaging. Ensure all components, including the power cord, are present.
- Turanga: Place the radio on a stable, flat surface away from direct sunlight, heat sources, and excessive moisture.
- Hononga Hiko: Insert the included power cord into the AC input on the back of the radio. Plug the other end into a standard North American wall outlet (120V AC, 60Hz).
- Tatūnga Antenna: For optimal FM reception, extend the built-in wire antenna fully. For AM reception, the radio utilizes an internal antenna; repositioning the radio may improve signal strength.
Nga Tohutohu Whakahaere
Te Hiko I Te / Weto me te Mana Volume
- To power on the radio, rotate the right-side ROTO knob clockwise until you hear a click.
- To adjust the volume, continue rotating the ROTO puku.
- To power off, rotate the ROTO pēhia te pātene i te taha maui kia pēhi rā anō.
Mahi irirangi AM/FM
- Rotate the left-side FM AM BT knob to select either FM or AM aratau.
- Turn the central WHAKARANGA knob to scan for radio stations. The tuning backlight will illuminate in AM/FM mode.
- Whakaritea te WHAKARANGA knob carefully for clear reception.
Mahi Nihokikorangi
- Rotate the left-side FM AM BT pona ki te tohu BT mode. The radio will enter Bluetooth pairing mode, indicated by a blue LED.
- I runga i tō pūrere Nihokikorangi (hei tauira, waea atamai, papa), rapua ngā pūrere Nihokikorangi e wātea ana.
- Select "Vintage Radio" or "ClearClick Radio" from the list to pair.
- Once paired, the blue LED will remain solid, and you can play audio from your device through the radio.
- The radio's tuning backlight stays on even in Bluetooth mode (NEW 2019 feature).
Te tiaki
- Te horoi: Use a soft, dry cloth to wipe the exterior of the radio. Do not use abrasive cleaners or solvents, as they may damage the wooden finish.
- Rokiroki: When not in use for extended periods, store the radio in a cool, dry place, away from extreme temperatures and humidity.
- Whakahau: Ensure the radio has adequate ventilation to prevent overheating. Do not block the ventilation holes on the back.
Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Karekau he kaha | Ko te taura hiko kaore i te hono; kare e kaha te putanga. | Ensure power cord is securely plugged into the radio and a working wall outlet. Check if the volume knob is turned on. |
| He pai te powhiri reo irirangi | He tohu ngoikore; antenna kaore i roa. | Fully extend the FM wire antenna. For AM, try repositioning the radio. Adjust the tuning knob slowly. |
| Nihokikorangi kore hono | Radio not in BT mode; device too far; device already paired. | Ensure radio is in BT mode. Move your device closer to the radio. Unpair "Vintage Radio" from your device's Bluetooth settings and try pairing again. |
| Karekau he tangi mai i te Nihokikorangi | Volume too low on radio or device. | Increase volume on both the radio and your connected Bluetooth device. |
Whakatakotoranga
- Rahi Hua: 10.5" (H) x 8" (W) x 6" (D)
- Taumaha Tūemi: 4.74 pauna
- Hangarau Hononga: Nihokikorangi
- Hangarau Tuner: AM, FM (2-Band)
- Puna Hiko: Corded Electric (Standard North American Power Plug)
- Nga Waahanga Kei roto: Waea hiko
- Taumata Atete Wai: Ehara i te wai ātete
- Hangarau Whakaatu: LCD (for tuning dial backlight)
Whakaahua 3: Taha view illustrating the dimensions of the radio.
Pūtāhui me te Tautoko
The ClearClick Retro AM/FM Radio with Bluetooth comes with a Pūtāhui 5-Tau Katoa. ClearClick is a USA-Based Small Business committed to providing excellent customer support.
For warranty claims or technical assistance, please refer to the contact information provided with your product packaging or visit the official ClearClick webpae. Puritia tō rīhiti hoko hei whakamana i te pūtāhui.
Nga Korero Haumaru Nui
Please read and follow all safety instructions provided in the original product packaging. Do not expose the unit to rain or moisture. Do not disassemble the unit; refer all servicing to qualified personnel. Ensure proper ventilation to prevent overheating.
