Immergas Victrix Tera 24KW Condensing Boiler Manual Kaiwhakamahi

1. Kupu Whakataki

This manual provides essential information for the safe and efficient operation of your Immergas Victrix Tera 24KW Condensing Boiler. It is crucial to read and understand all instructions before installation, operation, or maintenance. Keep this manual in a safe place for future reference.

Ka mutu te huaview

The Immergas Victrix Tera 24KW is a high-efficiency condensing boiler designed for domestic heating and hot water production. Its advanced technology ensures optimal performance and energy savings.

Whakaahua 1: Mua view of the Immergas Victrix Tera 24KW Condensing Boiler, showing the control panel and pressure gauge. This image illustrates the compact design and user interface of the unit.

2. Nga korero haumaru

Safety is paramount when dealing with gas appliances. Failure to follow these instructions could result in property damage, personal injury, or death.

• Tāuta Ngaio: This appliance must be installed by a qualified and certified professional in accordance with all local and national regulations.
• Whakahau: Ensure adequate ventilation in the installation area as required by local codes. Do not obstruct air vents.
• Nga Rire Hau: If you smell gas, do not operate electrical switches, light matches, or use any flame. Immediately open windows and doors, evacuate the building, and call your gas supplier or fire department.
• Waro Monoxide: Install carbon monoxide detectors in your home. Carbon monoxide is an odorless, colorless gas that can be fatal.
• Tiaki: Regular maintenance by a qualified technician is essential for safe and efficient operation.
• Nga tamariki me nga kararehe: Keep children and pets away from the boiler.
• Pēhanga wai: Regularly check the system water pressure as indicated on the boiler's gauge.

3. Tatūnga

Installation should only be performed by a qualified heating engineer.

Takitaki i mua i te whakaurunga:

• Verify that the boiler type (methane) matches the available gas supply.
• Ensure the installation site complies with all relevant building and safety regulations.
• Check that all necessary connections (gas, water, electrical, flue) are accessible and correctly sized.

Installation Steps (Summary for reference):

1. Whakapiki: Securely mount the boiler to a suitable wall using the provided template and fixings. Ensure it is level.
2. Pūnaha Rerewharewha: Install the flue system according to manufacturer's instructions and local regulations for safe exhaust of combustion products.
3. Hononga Hydraulic: Connect the heating flow and return pipes, domestic hot water inlet and outlet, and condensate drain. Ensure all connections are watertight.
4. Hononga hau: Connect the gas supply line to the boiler's gas inlet, ensuring a gas-tight seal and proper isolation valve installation.
5. Hononga Hiko: Connect the boiler to the main electrical supply via a fused spur, following the wiring diagram in the full installation manual.
6. Filling and Purging: Fill the heating system with water and thoroughly purge air from the system. Check for leaks.
7. Whakataunga: A qualified engineer must perform the initial commissioning, including gas pressure checks, combustion analysis, and functional tests.

4. Nga Tohutohu Whakahaere

Once installed and commissioned by a professional, operating your Immergas boiler is straightforward.

Paewhiri Mana Neke Atuview:

The boiler features a digital display and several buttons for adjusting settings. Refer to the detailed diagram in the full manual for specific button functions.

Mahi Taketake:

1. Hiko Whakaka/Weto: Use the main power switch (usually located near the boiler) to turn the unit on or off. The display will illuminate when powered on.
2. Heating Temperature Adjustment: Use the '+' and '-' buttons, typically marked with a radiator icon, to set your desired central heating temperature.
3. Domestic Hot Water (DHW) Temperature Adjustment: Use the '+' and '-' buttons, typically marked with a tap icon, to set your desired domestic hot water temperature.
4. Aratau Mahi: The boiler may have different operating modes (e.g., Summer, Winter, Auto). Select the appropriate mode using the mode selection button.
5. System Pressure Check: Regularly observe the pressure gauge on the boiler. The optimal pressure range is typically between 1.0 and 1.5 bar when the system is cold. If the pressure drops below 1.0 bar, repressurize the system using the filling loop (refer to the full manual for detailed instructions).

Waehere Hapa:

If an issue occurs, the boiler's display may show an error code. Note down the code and consult the troubleshooting section of this manual or the comprehensive error code list in the full Immergas manual. Do not attempt repairs yourself; contact a qualified technician.

5. Tiaki

Regular maintenance ensures the longevity, efficiency, and safe operation of your Immergas boiler.

• Annual Professional Service: It is mandatory to have your boiler serviced annually by a Gas Safe registered (or equivalent national standard) engineer. This service includes checking combustion, gas pressure, safety devices, and cleaning components.
• Pēhanga Pūnaha: Periodically check the system pressure on the boiler's gauge. If it consistently drops, there may be a leak in the system that needs professional attention.
• Te horoi: Keep the exterior of the boiler clean using a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure air vents are clear of obstructions.
• Parenga haupapa: If the boiler is installed in an unheated area, ensure the frost protection function is active (if available) or take appropriate measures to prevent freezing during cold periods.
• Whakarerenga Whakarere: Ensure the condensate drain pipe is not blocked and is free-flowing.

6. Te Raru

Before calling a service technician, you can perform some basic checks for common issues.

Hiranga: For any issue not resolved by these basic steps, or if you are unsure, always contact a qualified and certified heating engineer. Do not attempt complex repairs yourself.

7. Whakatakotoranga

Key technical specifications for the Immergas Victrix Tera 24KW Condensing Boiler:

8. Pūtāhui me te Tautoko

Your Immergas Victrix Tera 24KW Condensing Boiler is covered by a manufacturer's warranty. The specific terms and duration of the warranty may vary by region and purchase date. Please refer to the warranty card included with your product or visit the official Immergas webpae mo nga korero taipitopito.

Tautoko Kiritaki:

For technical assistance, spare parts, or warranty claims, please contact your authorized Immergas dealer or a certified service center. Ensure you have your boiler's model number (3027368) and serial number ready when contacting support.

For general inquiries, you may also visit the official Immergas website or consult their local distributors for contact information.